journal article·2018-08

Alternative Heat Treatments for Complex-Alloyed High-Cr Cast Iron Before Machining

V. G. Efremenko, K. M. Wu, Yu. G. Chabak, K. Shimizu, O. B. Isayev, V. V. Kudin

Publisher page

Abstract

Four heat treatment schedules were applied to 14.6 wt pct Cr-2.2 wt pct Mn-1 wt pct Ni cast iron to improve its machinability: (a) one-step continuous annealing [holding at 1123 K (950 °C), 2 hours, cooling at 20 to 150 K/h], (b) three-step isothermal annealing [1123 K (950 °C), 2 hours + 923 K (650 °C), 6 hours + 998 K (725 °C), 15 hours], (c) two-step isothermal annealing [923 K (650 °C), 6 hours + 998 K (725 °C), up to 25 hours], (d) quenching [1123 K (950 °C), 2 hours] and tempering [998 K (725 °C), up to 15 hours]. Heat treatments (a) and (b), which include high-temperature holding at 1123 K (950 °C), result in secondary carbide precipitation, and lead to a “martensite/austenite” or “martensite/austenite/pearlite” matrix and a bulk hardness of 56 to 62 HRC with poor machinability. Heat treatments (c) and (d) provide a matrix of “ferrite + granular carbides” with a bulk hardness lower than 40 HRC. Quenching and tempering result in the elimination of retained austenite to 11.6 vol pct. The kinetics of spheroidization and coagulation of eutectoid carbides and carbides as precipitated from martensite are presented and discussed. Drill testing showed that after quenching and tempering, cast iron has a superior machinability compared with other heat treatments.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Advanced materials and composites · Engineering and Environmental Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. X. Jia, X. Zuo, Y. Liu, N. Chen, and Y. Rong: Metall. and Mat. Trans. A., 2015, vol. 46, pp. 5514-25.10.1007/s11661-015-3137-4 ↗
2. V.G. Efremenko, K. Shimizu, A.P. Cheiliakh, T.V. Pastukhova, Yu.G. Chabak, and K. Kusumoto: Int. J. Miner., Metall. Mater., 2016, vol. 23, pp. 645–57.10.1007/s12613-016-1277-1 ↗
3. H.C. Shen, W.S. Zong, J.J. Nie, and J. Wang: Computer, Mechatronics, Control and Electronic Engineering-2010 (CMCE-2010), pp. 535–38.10.1109/CMCE.2010.5610273 ↗
4. A. Panda, M. Hatala, K. Dyadyura, J. Duplak, and A. Yunak: Key Eng. Mater., 2016, vol. 669, pp. 118-25.10.4028/www.scientific.net/KEM.669.118 ↗
5. J.A.G. de Sousa, W.F. Sales, and A. Machado: Adv. Manuf. Technol., 2017
6. A.M. Ravi, S.M. Murigendrappa, and P.G. Mukunda: Trans. Indian Inst. Met., 2014, vol. 67(4), pp. 485-02.10.1007/s12666-013-0369-0 ↗
7. O. Gutnichenko, V. Bushlya, J.M. Zhou, and Jan-Eric Ståhl: Wear., 2017, vol. 390-391, pp. 253-69.10.1016/j.wear.2017.08.005 ↗
8. L. Chen, J.M. Zhou, V. Bushlya, O. Gutnichenko, and J.E. Stahl: Int. J. Adv. Manuf. Technol., 2015, vol. 79(1), pp. 635-44.10.1007/s00170-015-6863-2 ↗
9. J.M. Zhou, and M. Andersson: Mater. Manuf. Processes., 2008, vol. 23(5), pp. 506-12.10.1080/10426910802104252 ↗
10. J.M. Zhou, A. Nilsson, M. Anderson, and J.E. Stahi: J. Mater. Process. Technol., 2004, vol. 153-154, pp. 751-5710.1016/j.jmatprotec.2004.04.336 ↗
11. E.I. Yatsun, I.S. Kotov, and N.P. Anikeeva: Chem. Pet. Eng., 2017, vol. 52(11-12), pp. 758–62.10.1007/s10556-017-0266-1 ↗
12. G.Ya. Shapovalova, and O.I. Bashkin: Metalloved. Term. Obrab. Met., 1985, no. 10, pp. 40–41
13. T. Fujita, K. Watanabe, A. Sawamoto, M. Kuwano, S. Morishige, K. Mirishige, and T. Fukui: J JFS, 1999, vol. 71(8), pp. 505–10
14. M. Watanabe, M. Kuwano, S. Miyakawa, K. Morishige, K. Ogi, A. Sawamoto, and T. Fukui: J JFS, 2002, vol. 74(2), pp. 98–102.
15. Bogodukhov SI, Batin AA, Masyuto OM, Perelman OM: Met. Sci. Heat Treat., 1991, vol. 33, issue. 4, pp. 323–2710.1007/BF00776445 ↗
16. I.I. Tzypin: White wear resistant cast irons, Moscow, Metallurgy, 1983 (in Russian).
17. Patent No 4395284 USA, 1983.
18. J.R. Davis: Machining. ASM Handbook. ASM, 1989.
19. A.A. Rauba, and G.V. Bychkov: Foundry, 1985, no. 7, p. 33. (in Russian)
20. H. Gasan, and F. Erturk: Metall. Mater. Trans. A., 2013, vol. 44(11), pp. 4993-05.10.1007/s11661-013-1851-3 ↗
21. V.G. Efremenko, Yu.G. Chabak, and M.N. Brykov: J. Mater. Eng. Perform., 2013, vol. 22 (5), pp. 1378-85.10.1007/s11665-012-0434-6 ↗
22. A.E. Karantzalis, A. Lekatou, and H. Mavros: J. Mater. Eng. Perform., 2009, vol. 18 (2), pp. 174-81.10.1007/s11665-008-9285-6 ↗
23. A. Sawamoto, M. Kuwano, T. Fujita, K. Ogi, T. Fukui, and Y. Ueda: Chuzo kogaku, 1996, vol. 68, no 8, pp. 650-56.
24. G.E. Totten (ed.): Steel Heat Treatment. Metallurgy and Technologies. Taylor & Francis, Milton Park (2007).
25. P. Amorim, H. Santos, J. Santos, S. Coimbra, and C. Sá: Mater. Sci. Forum., 2004, vol. 455-56, pp. 290-294.10.4028/www.scientific.net/MSF.455-456.290 ↗
26. Cias W.W.: Transactions of AFS., 1976, vol. 82, pp. 317-28.
27. S. Byelikov, I. Volchok, V. Netrebko: Arch Metall Mater. 2013, 58(3):895–97.10.2478/amm-2013-0095 ↗
28. Koval AD, Efremenko VG, Brykov MN, Andrushchenko MI, Kulikovskii RA, Efremenko AV: J. Frict. Wear, 2012, 33(1):39–4610.3103/S1068366612010072 ↗
29. X.L. Xu, Z.W. Yu, Y.Q. Ma, X. Wang, and Y.Q. Shi: Mater. Sci. Technol., 2002, vol. 18(12), pp. 1561-1564.10.1179/026708302225007466 ↗
30. V.G. Efremenko, K. Shimizu, and Yu.G. Chabak: Metall. and Mat. Trans. A., 2013, vol. 44A, pp. 5434-5446.10.1007/s11661-013-1890-9 ↗
31. A.P. Cheylyakh: Economically Alloyed Metastable Alloys and Reinforcement Technologies. Kharkov, 2003. (in Russian).
32. V.G. Efremenko, and Yu.G. Chabak: Metallofiz. Noveishie Tekhnol., 2012, vol. 34 (9), pp. 1205-20.
33. J.H. Ramírez-Ramírez, R. Colás, N.F. Garza Montes de Oca: J. Iron Steel Res. Int., 2013, vol. 20, pp. 122-29.10.1016/S1006-706X(13)60187-9 ↗
34. N. Miyakawa, K. Wakasugi, M. Nomura, M. Sakamoto and K. Keisaku: J. Jpn. Foundry Eng. Soc., 2001, vol. 73, pp. 3-8.
35. V.G. Efremenko, Yu.G. Chabak, A. Lekatou, A.E. Karantzalis, and A.V. Efremenko: Metall. Mat. Trans. A., 2016, vol. 47A(2), pp. 1529-43.10.1007/s11661-016-3336-7 ↗
36. Jing Sun, and Hao Yu: Mater. Sci. Eng., A., 2013, vol. 586, pp. 100-07.10.1016/j.msea.2013.08.021 ↗
37. G. Harris, E.D. Doyle, A.C. Vlasveld, J. Audy, and J. M. Long: Wear, 2003, vol. 254, pp. 185-94.10.1016/S0043-1648(02)00290-9 ↗
38. Da L, Liu L, Zhang Y, Ye C, Ren X, Yang Y, Yang Q.: Mater. Des., 2009, vol. 30, pp. 340-45.10.1016/j.matdes.2008.04.061 ↗
39. J. P. Lai, Q.L. Pan, Z.B. Wang, H.R. Cui, X.D. Wang, and Z.Z. Gao: J. Mater. Eng. Perform., 2017, vol. 26, issue 10, pp. 4667–75.10.1007/s11665-017-2943-9 ↗
40. K.Yu. Okishev, E.S. Vasyukova, A.G. Grebenshchikova, A.S. Sozykina, and D.A. Mirzaev: Solid State Phenom., 2017, vol. 265, pp. 884-88.10.4028/www.scientific.net/SSP.265.884 ↗
41. R.E. Smallman, and R.J. Bishop: Modern Physical Metallurgy and Materials Engineering: Science, Process, Applications, Butterworth-Heinemann, 1999.