journal article·2018-09Open access

On the Influence of Nb/Ti Ratio on Environmentally-Assisted Crack Growth in High-Strength Nickel-Based Superalloys

A. A. N. Németh, D. J. Crudden, D. M. Collins, V. Kuksenko, C. H. Liebscher, D. E. J. Armstrong, A. J. Wilkinson, R. C. Reed

Abstract

Abstract The effect of Nb/Ti ratio on environmentally-assisted crack growth of three prototype Ni-based superalloys is studied. For these alloys, the yield strength is unaltered with increasing Nb/Ti ratio due to an increase in grain size. This situation has allowed the rationalization of the factors influencing damage tolerance at 700 °C. Primary intergranular cracks have been investigated using energy-dispersive X-ray spectroscopy in a scanning transmission electron microscope and the analysis of electron back-scatter diffraction patterns. Any possible detrimental effect of Nb on the observed crack tip damage due to Nb-rich oxide formation is not observed. Instead, evidence is presented to indicate that the tertiary γ′-precipitates are dissolving ahead of the crack consistent with the formation of oxides such as alumina and rutile. Our results have implications for alloy design efforts; at any given strength level, both more and less damage-tolerant variants of these alloys can be designed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. R. Jiang, D.J. Bull, D. Proprentner, B. Shollock, and P.A.S. Reed: Int. J. Fatigue, 2017. vol. 99, pp. 175–186. https://doi.org/10.1016/j.ijfatigue.2017.03.003.10.1016/j.ijfatigue.2017.03.003 ↗
2. Tresa M. Pollock and Sammy Tin: J. Propuls. Power, 2006. vol. 22, pp. 361–374. https://doi.org/10.2514/1.18239.10.2514/1.18239 ↗
3. S. Cruchley, H. Evans, and M. Taylor: Mater. High Temp., 2016. vol. 3409, pp. 1–11. https://doi.org/10.1080/09603409.2016.1171952.10.1080/09603409.2016.1171952 ↗
4. A.A.N. Németh, D.J. Crudden, D.E.J. Armstrong, D.M. Collins, K. Li, A.J. Wilkinson, C.R.M. Grovenor, and R.C. Reed: Acta Mater., 2017. vol. 126, pp. 361–371. https://doi.org/10.1016/j.actamat.2016.12.039.10.1016/j.actamat.2016.12.039 ↗
5. H.S. Kitaguchi, M.P. Moody, H.Y. Li, H.E. Evans, M.C. Hardy, and S. Lozano-Perez: Scripta Mater., 2015. vol. 97, pp. 41–44. https://doi.org/10.1016/j.scriptamat.2014.10.025.10.1016/j.scriptamat.2014.10.025 ↗
6. L. Viskari, M. Hörnqvist, K.L. Moore, Y. Cao, and K. Stiller: Acta Mater., 2013. vol. 61, pp. 3630–3639. https://doi.org/10.1016/j.actamat.2013.02.050.10.1016/j.actamat.2013.02.050 ↗
7. R. P. Wei, C. F. Miller, Z. Huang, G. W. Simmons, and D. G. Harlow: Eng. Fract. Mech., 2009. vol. 76, pp. 715–727. https://doi.org/10.1016/j.engfracmech.2008.09.003.10.1016/j.engfracmech.2008.09.003 ↗
8. M. Gao, D.J. Dwyer, and R.P. Wei: Scripta Metall. Mater., 1995. vol. 32, pp. 1169–1174. https://doi.org/10.1016/0956-716X(95)00120-K.10.1016/0956-716X(95)00120-K ↗
9. H.Y. Li, J.F. Sun, M.C. Hardy, H.E. Evans, S.J. Williams, T.J.A. Doel, and P. Bowen: Acta Mater., 2015. vol. 90, pp. 355–369. https://doi.org/10.1016/j.actamat.2015.02.023.10.1016/j.actamat.2015.02.023 ↗
10. J. Telesman, T.P. Gabb, and L.J. Ghosn: Superalloys, Wiley, Hoboken, 2016,. pp. 549–60.
11. Stoichko Antonov, Jiajie Huo, Qiang Feng, Dieter Isheim, David N. Seidman, Randolph C. Helmink, Eugene Sun, and Sammy Tin: Scripta Mater., 2017. vol. 138, pp. 35–38. https://doi.org/10.1016/j.scriptamat.2017.05.028.10.1016/j.scriptamat.2017.05.028 ↗
12. A. A. N. Németh, D. J. Crudden, D. M. Collins, D. E. J. Armstrong, and R. C. Reed: Superalloys 2016, pp. 801–10.
13. R. C. Reed, T. Tao, and N. Warnken: Acta Mater., 2009. vol. 57, pp. 5898–5913. https://doi.org/10.1016/j.actamat.2009.08.018.10.1016/j.actamat.2009.08.018 ↗
14. D. J. Crudden, A. Mottura, N. Warnken, B. Raeisinia, and R. C. Reed: Acta Mater., 2014. vol. 75, pp. 356–370. https://doi.org/10.1016/j.actamat.2014.04.075.10.1016/j.actamat.2014.04.075 ↗
15. J. O. Andersson, Thomas Helander, Lars Höglund, Pingfang Shi, and Bo Sundman: Calphad, 2002. vol. 26, pp. 273–312. https://doi.org/10.1016/S0364-5916(02)00037-8.10.1016/S0364-5916(02)00037-8 ↗
16. Caroline A Schneider, Wayne S Rasband, and Kevin W Eliceiri: Nat. Methods, 2012. vol. 9, pp. 671–675. https://doi.org/10.1038/nmeth.2089.10.1038/nmeth.2089 ↗
17. D. M. Collins, D. J. Crudden, E. Alabort, T. Connolley, and R. C. Reed: Acta Mater., 2015. vol. 94, pp. 244–256. https://doi.org/10.1016/j.actamat.2015.04.046.10.1016/j.actamat.2015.04.046 ↗
18. Frank Wallow and Eckhard Nembach: Scripta Mater., 1996. vol. 34, pp. 499–505. https://doi.org/10.1016/S0956-716X(95)00548-A.10.1016/S0956-716X(95)00548-A ↗
19. L. A. Gypen and A. Deruyttere: J. Mater. Sci., 1977. vol. 12(5), pp. 1028–1033. https://doi.org/10.1007/BF00540987.10.1007/BF00540987 ↗
20. H. A. Roth, C. L. Davis, and R. C. Thomson: Metall. Mater. Trans. A, 1997. vol. 28(6), pp. 1329–1335. https://doi.org/10.1007/s11661-997-0268-2.10.1007/s11661-997-0268-2 ↗
21. Yoshinao Mishima, Shouichi Ochiai, Noboru Hamao, Masayoshi Yodogawa, and Tomoo Suzuki: Trans. Japan Inst. Met., 1986. vol. 27, pp. 656–664. https://doi.org/10.2320/matertrans1960.27.656.10.2320/matertrans1960.27.656 ↗
22. E.I. Galindo-Nava, L.D. Connor, and C.M.F. Rae: Acta Mater., 2015. vol. 98, pp. 377–390. https://doi.org/10.1016/j.actamat.2015.07.048.10.1016/j.actamat.2015.07.048 ↗
23. B. Roebuck, D.C. Cox, and R.C. Reed: Superalloys, Wiley, Wiley, 2004, pp. 523–28.
24. D.P. Rooke and D.J. Cartwright: Eng. Fract. Mech., 1976. vol. 8, pp. 567–573. https://doi.org/10.1016/0013-7944(76)90010-2.10.1016/0013-7944(76)90010-2 ↗
25. P.D. Littlewood, T.B. Britton, and A.J. Wilkinson: Acta Mater., 2011. vol. 59, pp. 6489–6500. https://doi.org/10.1016/j.actamat.2011.07.016.10.1016/j.actamat.2011.07.016 ↗
26. M.C. Rezende, L.S. Araújo, S.B. Gabriel, J. Dille, and L.H. de Almeida: J. Alloys Compd., 2015. vol. 643, pp. 256–259. https://doi.org/10.1016/j.jallcom.2014.12.279.10.1016/j.jallcom.2014.12.279 ↗
27. Gabb, T.P., Telesman, J., Banik, A., and McDevitt, E.: Proceedings of the Symposium on Superalloy 718 and Derivatives, 2014, pp. 697–712.10.1002/9781119016854.ch54 ↗
28. Mattias Calmunger, Guocai Chai, Sten Johansson, and Johan Moverare: Theor. Appl. Mech. Lett., 2014. vol. 4, pp. 0410041–0410046. https://doi.org/10.1063/2.1404104.10.1063/2.1404104 ↗
29. H.S. Kitaguchi, H.Y. Li, H.E. Evans, R.G. Ding, I.P. Jones, G. Baxter, and P. Bowen: Acta Mater., 2013. vol. 61, pp. 1968–1981. https://doi.org/10.1016/j.actamat.2012.12.017.10.1016/j.actamat.2012.12.017 ↗
30. C. F. Miller, G. W. Simmons, and R. P. Wei: Scripta Mater., 2000. vol. 42, pp. 227–232. https://doi.org/10.1016/S1359-6462(99)00336-X.10.1016/S1359-6462(99)00336-X ↗
31. C. F. Miller, G. W. Simmons, and R. P. Wei: Scripta Mater., 2003. vol. 48, pp. 103–108. https://doi.org/10.1016/S1359-6462(02)00355-X.10.1016/S1359-6462(02)00355-X ↗
32. J. Telesman, P. Kantzos, J. Gayda, P.J. Bonacuse, and A. Prescenzi: Superalloys 2004, pp. 215–224.
33. S. T. Wlodek: Trans. Metall. Soc. AIME, 1964. vol. 230, pp. 1078–1090.
34. H. T. Pang and P. A. S. Reed: Mater. Sci. Eng. A, 2007. vol. 448, pp. 67–79. https://doi.org/10.1016/j.msea.2006.11.016.10.1016/j.msea.2006.11.016 ↗
35. S. Everitt, M.J. Starink, and P.A.S. Reed: Superalloys, Wiley, Hoboken, 2008, pp. 741–50.
36. R. Jiang, S. Everitt, M. Lewandowski, N. Gao, and P.A.S. Reed: Int. J. Fatigue, 2014. vol. 62, pp. 217–227. https://doi.org/10.1016/j.ijfatigue.2013.07.014.10.1016/j.ijfatigue.2013.07.014 ↗
37. D. Gustafsson and E. Lundström: Int. J. Fatigue, 2013. vol. 48, pp. 178–186. https://doi.org/10.1016/j.ijfatigue.2012.10.018.10.1016/j.ijfatigue.2012.10.018 ↗
38. Magnus Hörnqvist, Leif Viskari, Katie L. Moore, and Krystyna Stiller: Mater. Sci. Eng. A, 2014. vol. 609, pp. 131–140. https://doi.org/10.1016/j.msea.2014.04.102.10.1016/j.msea.2014.04.102 ↗
39. Ulrich Krupp, Ken Wackermann, Hans-Jürgen Christ, Magnus Hörnqvist Colliander, and Krystyna Stiller: Oxid. Met., 2017. vol. 88, pp. 3–14. https://doi.org/10.1007/s11085-016-9707-z.10.1007/s11085-016-9707-z ↗
40. R. Jiang and P. A. S. Reed: Mater. Sci. Technol., 2016. vol. 32, pp. 401–406. https://doi.org/10.1080/02670836.2016.1148227.10.1080/02670836.2016.1148227 ↗
41. S.L. Mannan, K.G. Samuel, and P. Rodriguez: Mater. Sci. Eng., 1985. vol. 68, pp. 143–149. https://doi.org/10.1016/0025-5416(85)90403-3.10.1016/0025-5416(85)90403-3 ↗
42. S. Floreen and R. H. Kane: Metall. Trans. A, 1976. vol. 7, pp. 1157–1160. https://doi.org/10.1007/BF02656598.10.1007/BF02656598 ↗
43. Kimberly Maciejewski and Hamouda Ghonem: Mater. Sci. Eng. A, 2013. vol. 560, pp. 439–449. https://doi.org/10.1016/j.msea.2012.09.088.10.1016/j.msea.2012.09.088 ↗
44. Stephen R. Shatynski: Oxid. Met., 1979. vol. 13, pp. 105–118. https://doi.org/10.1007/BF00611975.10.1007/BF00611975 ↗
45. J. Telesman, T.P. Gabb, A. Garg, P. Bonacuse, and J. Gayda: Superalloys 2008, pp. 807–816.
46. G. H. Gessinger and M. J. Bomford: Int. Metall. Rev., 1974. vol. 19, pp. 51–76. https://doi.org/10.1179/imtlr.1974.19.1.51.10.1179/imtlr.1974.19.1.51 ↗
47. Bogdan Piekarski: Mater. Charact., 2001. vol. 47, pp. 181–186. https://doi.org/10.1016/S1044-5803(01)00166-8.10.1016/S1044-5803(01)00166-8 ↗
48. M. F. Ashby and K. E. Easterling: Acta Metall., 1982. vol. 30, pp. 1969–1978. https://doi.org/10.1016/0001-6160(82)90100-6.10.1016/0001-6160(82)90100-6 ↗