Microstructures and Properties of 40Cu/Ag(Invar) Composites Fabricated by Powder Metallurgy and Subsequent Thermo-Mechanical Treatment
Source abstract
Abstract
Composites of 40Cu/Ag(Invar) were prepared via pressureless sintering and subsequent thermo-mechanical treatment from raw materials of electroless Ag-plated Invar alloy powder and electrolytic Cu powder. Microstructures and properties of the prepared composites were studied to evaluate the effect of the Ag layer on blocking Cu/Invar interfacial diffusion in the composites. The electroless-plated Ag layer was dense, uniform, continuous, and bonded tightly with the Invar alloy substrate. During sintering of the composites, the Ag layer effectively prevented Cu/Invar interfacial diffusion. During cold-rolling, the Ag layer was deformed uniformly with the Invar alloy particles. The composites exhibited bi-continuous network structure and considerably improved properties. After sintering at 775 °C and subsequent thermo-mechanical treatment, the 40Cu/Ag(Invar) composites showed satisfactory comprehensive properties: relative density of 99.0 pct, hardness of HV 253, thermal conductivity of 55.7 W/(m K), and coefficient of thermal expansion of 11.2 × 10−6/K.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Powder Metallurgy Techniques and Materials · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. E.R. Tagore, A. Upadhyaya and A.V. Pathak: IEEE Trans. Electron. Packag. Manuf., 2008, vol.31, pp. 260-5.10.1109/TEPM.2008.926287 ↗
2. J.M. Tao, X.K. Zhu, W.W. Tian, P. Yang and H. Yang: Trans. Nonferr. Met. Soc. China, 2014, vol. 24, pp. 3210-4.10.1016/S1003-6326(14)63462-2 ↗
3. J.F. Li, Z.Q. Zheng, X.W. Li and Z.W. Peng: Mater. Des., 2009, vol. 30, pp. 314-8.10.1016/j.matdes.2008.04.077 ↗
4. D.M. Wang, Z.X. Zheng, J. Lv, G.Q. Xu, S. Zhou, W.M. Tang and Y.C. Wu: Ceram. Inter., 2017, vol. 43, pp. 1755-61.10.1016/j.ceramint.2016.10.104 ↗
5. D.M. Jacobson: Powder Metall., 2000, vol. 43, pp. 200-2.
6. S. Jha: Proc. 45th Electron. Comp. Tech. Conf., Las Vegas, NV, 1995, pp. 542–47.
7. R.D. Cottle, X. Chen, R.K. Jain, Z. Eliezer, L. Rabenberg and M.E. Fine: JOM, 1998, vol. 50, pp. 67-69.10.1007/s11837-998-0132-x ↗
8. J. Stolk and A. Manthiram: Mater. Sci. Eng. B, 1999, vol. 60B, pp.112-17.10.1016/S0921-5107(99)00022-7 ↗
9. D. Wu, S.P. Wu, Y. Lei, C.D. Shi, Y.C. Wu and W. M. Tang: Powder Metall., 2014, vol. 58, pp. 100-5.10.1179/1743290114Y.0000000098 ↗
10. X. Zhang, D. Wu, L. Yang, C.D Shi, Y.C. Wu and W.M. Tang: Trans. Nonferr. Met. Soc. China, 2017, vol. 27, pp. 1759–66.10.1016/S1003-6326(17)60198-5 ↗
11. W. Dan, Y. Lei, C.D. Shi, Y.C. Wu and W. M. Tang: Trans. Nonferr. Met. Soc. China, 2015, vol. 25, pp. 1995-2002.10.1016/S1003-6326(15)63808-0 ↗
12. X.R. Xu, X.J. Luo, H.R. Zhuang, W.L. Li and B.L. Zhang: Mater. Lett., 2003, vol. 57, pp. 3987-91.10.1016/S0167-577X(03)00252-0 ↗
13. X. Zhang: Master Degree Dissertation, Hefei Univ. Tech., Hefei, China, Apr. 2017, pp. 19–27.
14. W.F. Gale and T.C. Totemeier: Smithells Metals Reference Book, 8th ed., Part 11: Equilibrium Diagrams, Elsevier Butterworth-Heineman, Burlington, MA, 2004, p. 13.10.1016/B978-075067509-3/50014-2 ↗
15. Y.W. Yan and L. Geng: J. Mater. Sci., 2007, vol. 42, pp. 6433-38.10.1007/s10853-006-1200-7 ↗
16. H.T. Hai, J.G. Ahn, D.J. Kim, J.R. Lee, H.S. Chung and C.O. Kim: Surf. Coat. Tech., 2006, vol. 201, pp. 3788-92.10.1016/j.surfcoat.2006.03.025 ↗
17. Y.G. Ko, S. Namgung, B.U. Lee and D.H. Shin: J. Alloys Compd., 2010, vol. 504, pp. 448-51.10.1016/j.jallcom.2010.02.198 ↗
18. K.M. Liu, D.P. Lu, H.T. Zhou, A. Atrens, J. Zou, Y.L. Yang and S.M. Zeng: Mater. Sci. Eng. A, 2010, vol. 527A, pp. 4953-8.10.1016/j.msea.2010.04.051 ↗
19. X. W. Zuo, R. Guo, C. C. Zhao, L. Zhang, E. G. Wang, K. Han: J. Alloys Compd., 2016, vol. 676, pp 46-53.10.1016/j.jallcom.2016.03.127 ↗
20. Y.Z. Tian and Z.F. Zhang: Scr. Mater., 2013, vol. 68, pp. 542-5.10.1016/j.scriptamat.2012.12.014 ↗
21. Y.G. Ko, N. Seung, B.U. Lee and D. H. Shin: J. Alloys Compds., 2010, vol. 504, pp. 448-51.10.1016/j.jallcom.2010.02.198 ↗
22. H.Y. Gao, J. Wang, D. Shu and B.D. Sun: J. Alloys Compds., 2007, vol. 438, pp. 268-73.10.1016/j.jallcom.2006.08.027 ↗
23. J.B. Liu, L. Meng and Y.W. Zeng: Mater. Sci. Eng. A, 2006, vol. 435-6, pp. 237-44.10.1016/j.msea.2006.07.125 ↗
24. Y.J. Liu, L.J. Zhang, Y. Du, G. Sheng, J. Wang and D. Liang: CALPHAD, 2011, vol. 35, pp. 376-83.10.1016/j.calphad.2011.04.006 ↗
25. E.A. Sterling, J. Stolk, L. Hafford and M. Gross: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 1701-9.10.1007/s11661-009-9859-4 ↗