journal article·2019-03-15

Role of Anisotropic Strength and Stiffness in Governing the Initiation and Propagation of Yielding in Polycrystalline Solids

Andrew C. Poshadel, Paul R. Dawson

Publisher page

Abstract

The ratio of directional strength-to-stiffness is important in governing the relative order in which individual crystals within a polycrystalline aggregate will yield as the aggregate is loaded. In this paper, a strength-to-stiffness parameter is formulated for multiaxial loading that extends the development of Wong and Dawson for uniaxial loading. Building on the principle of strength-to-stiffness, a methodology for predicting the macroscopic stresses at which elements in a finite element mesh yield is developed. This analysis uses elastic strain data from one increment of a purely elastic finite element simulation to make the prediction, given knowledge of the single-crystal yield surface. Simulations of austenitic strainless steel AL6XN are used to demonstrated the effectivness of the strength-to-stiffness parameter and yield prediction methodology.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · Metal Forming Simulation Techniques · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. W.F. Hosford, The mechanics of crystals and textured polycrystals (Oxford University Press, New York, 1993)
2. S.L. Wong, P.R. Dawson, Acta Mater. 58, 1658–1678 (2010)10.1016/j.actamat.2009.11.009 ↗
3. U.F. Kocks, C.N. Tomé, H.R. Wenk, Texture and Anisotropy (Cambridge University Press, Cambridge, UK, 1998)
4. A.C. Poshadel, M.A. Gharghouri, and P.R. Dawson: Metall. Mater. Trans. A, 2018, https://doi.org/10.1007/s11661-018-5009-1.10.1007/s11661-018-5009-1 ↗
5. A.C. Poshadel, M.A. Gharghouri, and P.R. Dawson: Metall. Mater. Trans. A, 2018, https://doi.org/10.1007/s11661-018-5085-2.10.1007/s11661-018-5085-2 ↗
6. A.C. Poshadel and P.R. Dawson: Metall. Mater. Trans. A, 2017, arXiv:1711.10631 (submitted).
7. I. Noyan, J. Cohen, Residual Stress, Measured by Diffraction and Interpretation, (Springer-Verlag, New York, 1987)
8. R. Snyder, J. Fiala, and H. Bunge: IUCR Crystallographic Symposia, Oxford University Press, Oxford, 1999
9. J. Als-Nielsen, D. McMorrow, Elements of Modern X-Ray Physics (Wiley, West Sussex, U.K., 2001)
10. M. Miller, P. Dawson, Current Opinion in Solid State and Materials Science 2014, 286–299 (2014)10.1016/j.cossms.2014.09.001 ↗
11. P. Dawson, D. Boyce, S. MacEwen, R. Rogge, Metallurgical and Materials Transactions A 31, 1543–1555 (2000)10.1007/s11661-000-0165-4 ↗
12. U. Leinert, T. Han, J. Almer, P. Dawson, T. Leffers, L. Margulies, H. Nielsen, H. Poulsen, Acta Materialia 52, 4461–4467 (2004)10.1016/j.actamat.2004.05.051 ↗
13. X. Song, S.Y. Zhang, D. Dini, A. Korsunsky, Computational Materials Science 44, 131–137 (2008)10.1016/j.commatsci.2008.01.043 ↗
14. L. Li, S. Van Petegem, H. Van Swygenhoven, P. Anderson, Acta Materialia 60, 7001–7010 (2012)10.1016/j.actamat.2012.09.007 ↗
15. P. Hedstrom, T.-S. Han, U. Lienert, J. Almer, M. Oden, Acta Mater. 58, 734–744 (2010)10.1016/j.actamat.2009.09.053 ↗
16. T.S. Han, P.R. Dawson: Mater. Sci. Eng. A 405, 18–33 (2005)10.1016/j.msea.2005.05.095 ↗
17. S.L. Wong, P.R. Dawson, Acta Materialia 59, 6901–6916 (2011)10.1016/j.actamat.2011.07.042 ↗
18. P. Dawson, D. Boyce, S. MacEwen, R. Rogge, Materials Science and Engineering A 313, 123–144 (2001)10.1016/S0921-5093(01)00967-4 ↗
19. X. Song, S.Y. Zhang, D. Dini, A.M. Korsunsky, Computational Materials Science 44, 131–137 (2008)10.1016/j.commatsci.2008.01.043 ↗
20. P.R. Dawson, D.E. Boyce, R. Rogge, Materials Science and Engineering A 399, 13–25 (2005)10.1016/j.msea.2005.02.029 ↗
21. T. Marin, P.R. Dawson, M.A. Gharghouri, J. Mech. Phys. Solids 60, 921–944 (2012)10.1016/j.jmps.2012.01.007 ↗
22. D.M. Collins, T. Erinosho, F. Dunne, R.I. Todd, T. Connolley, M. Mostafavi, H. Kupfer, A.J. Wilkinson, Acta Materialia 124, 290–304 (2017)10.1016/j.actamat.2016.11.011 ↗
23. J.V. Bernier, M.P. Miller, Journal of Applied Crystallography 39, 358–368 (2006)10.1107/S0021889806009873 ↗
24. M. Miller, J.-S. Park, P.R. Dawson, T.-S. Han, Acta Materialia 56, 3927–3939 (2008)10.1016/j.actamat.2008.04.062 ↗
25. E. Wielewski, D.E. Boyce, J.-S. Park, M. Matthew, P.R. Dawson, Acta Materialia 126, 469–480 (2017)10.1016/j.actamat.2016.12.026 ↗
26. P.R. Dawson, D.E. Boyce, J.-S. Park, E. Wielewski, M.P. Miller, Acta Materialia 144, 92–106 (2018)10.1016/j.actamat.2017.10.032 ↗
27. M. Kasemer, M. Echlin, J. Stinville, T. Pollock, P. Dawson, Acta Materialia 136, 288–302 (2017)10.1016/j.actamat.2017.06.059 ↗
28. J.C. Schuren, S.L. Wong, P.R. Dawson, M.P. Miller, J. Strain Analysis 49, 33–50 (2014)10.1177/0309324713492325 ↗
29. C. Efstathiou, D.E. Boyce, J.-S. Park, U. Lienert, P.R. Dawson, M.P. Miller, Acta Materialia 58, 5806–5816 (2010)10.1016/j.actamat.2010.06.056 ↗
30. D.C. Pagan, P.A. Shade, N.R. Barton, J.-S. Park, P. Kenesei, D.B. Menasche, J.V. Bernier, Acta Materialia 128, 406–417 (2017)10.1016/j.actamat.2017.02.042 ↗
31. K. Chatterjee, J. Kob, J.J.T. Weiss, H. Philipp, J. Becker, C. Purohit, S. Gruner, A. Beaudoin, Journal of the Mechanics and Physics of Solids 109, 95–116 (2017)10.1016/j.jmps.2017.08.008 ↗
32. M. Obstalecki, S.L. Wong, P.R. Dawson, M.P. Miller, Acta Mater. 75, 259–272 (2014)10.1016/j.actamat.2014.04.059 ↗
33. S.-L. Wong, M. Obstalecki, J.-S. Park, M. Miller, P. Dawson, Journal of the Mechanics and Physics of Solids 79, 157–185 (2015)10.1016/j.jmps.2015.03.010 ↗
34. H. Abdolvand, M. Majkut, J. Oddershede, J.P. Wright, M.R. Daymond, Acta Materialia 93, 235–245 (2015)10.1016/j.actamat.2015.04.025 ↗
35. H. Paranjape, P. Paul, H. Sharma, P. Kenesei, J.-S. Park, T. Duerig, L. Brinson, A.P. Stebner, Journal of the Mechanics and Physics of Solids 102, 46–66 (2017)10.1016/j.jmps.2017.02.007 ↗
36. K. Kapoor, M. Sangid, Materials Science and Engineering: A 729, 53–63 (2018)10.1016/j.msea.2018.05.031 ↗
37. H. Proudhon, N. Vaxelaire, S.S. Labat, S. Forest, O. Thomas, C. R. Physique 11, 293–303 (2010)10.1016/j.crhy.2010.07.009 ↗
38. S.L. Wong, J.S. Park, M.P. Miller, P.R. Dawson, Comput. Mater. Sci. 77, 456–466 (2013)10.1016/j.commatsci.2013.03.019 ↗
39. P.R. Dawson and D.E. Boyce: arXiv:1504.03296 [cond-mat.mtrl-sci], 2015.
40. E.B. Marin, P.R. Dawson, Comput. Methods Appl. Mech. Engrg. 165, 1–21 (1998)10.1016/S0045-7825(98)00034-6 ↗
41. E.B. Marin, P.R. Dawson, Comput. Methods Appl. Mech. Engrg. 165, 23–41 (1998)10.1016/S0045-7825(98)00033-4 ↗
42. Allegheny Ludlum Corporation: Stainless Steel Al-6xn Alloy, Technical Data Blue Sheet, no date
43. R. Quey, P. Dawson, F. Barbe, Computer Methods in Applied Mechanics and Engineering 200, 1729–1745 (2011)10.1016/j.cma.2011.01.002 ↗
44. T. Marin, P.R. Dawson, M.A. Gharghouri, R.B. Rogge, Acta Mater. 56, 4183–4199 (2008)10.1016/j.actamat.2008.04.048 ↗
45. H.M. Ledbetter, Physica Status Solidi (A) 85, 89–96 (1984)10.1002/pssa.2210850111 ↗
46. S. Torbert: Applied Computer Science, 2nd edn. Springer International Publishing, Berlin, 2016.10.1007/978-3-319-30866-1 ↗