journal article·2017-02

Effect of Phase Contiguity and Morphology on the Evolution of Deformation Texture in Two-Phase Alloys

N. P. Gurao, Satyam Suwas

Publisher page

Abstract

Deformation texture evolution in two-phase xFe-yNi-(100-x-y)Cr model alloys and Ti-13Nb-13Zr alloy was studied during rolling to develop an understanding of micro-mechanisms of deformation in industrially relevant two-phase FCC-BCC steels and HCP-BCC titanium alloys, respectively. It was found that volume fraction and contiguity of phases lead to systematic changes in texture, while morphology affects the strength of texture. There was a characteristic change in texture from typical Brass-type to a weaker Copper-type texture in the austenite phase accompanied with a change from alpha fiber to gamma fiber in ferrite phase for Fe-Ni-Cr alloys with increase in fraction of harder ferrite phase. However, similar characteristic texture evolution was noted in both alpha and beta phase irrespective of the different initial morphologies in Ti-13Nb-13Zr alloy. Viscoplastic self-consistent simulations with two-phase scheme were able to qualitatively predict texture evolution in individual phases. It is proposed that the transition from iso-strain-type behavior for equiaxed microstructure at low strain to iso-stress-type behavior at higher strain is aided by the presence of higher volume fraction of the second phase and increasing aspect ratio of individual phases in two-phase alloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. U.F. Kocks, C.N. Tome, H.-R. Wenk, Texture and Anisotropy, Cambridge University Press, Cambridge, 1998, pp. 178-208.
2. Y. Tamota, K. Kuroki, T. Mori, I. Tamura, Mater. Sci. Eng., 1976, vol. 24, pp. 85-94.10.1016/0025-5416(76)90097-5 ↗
3. K. Morii, H. Mecking, G. Lutjering, Y. Scripta Metall., 1986, vol. 20, pp. 1795-1800.10.1016/0036-9748(86)90291-7 ↗
4. S. Ankem, H. Margolin, Metall. Trans. A, 1986, vol. 17, pp. 2209-26.10.1007/BF02645919 ↗
5. S. Ankem, H. Margolin, C.A. Greene, B.W. Neuberger, P.G. Oberson, Prog. Mater. Sci., 2006, vol. 51, pp. 632-709.10.1016/j.pmatsci.2005.10.003 ↗
6. D. Mattisen, D. Raabe, F. Heringhaus, Acta Mater., 1999, vol. 47, pp. 1627-34.10.1016/S1359-6454(99)00026-9 ↗
7. J. Wang, A. Misra, Curr. Opin. Solid State Mater. Sci., 2011, vol. 15, pp. 20-28.10.1016/j.cossms.2010.09.002 ↗
8. J.J. Moverare, M. Oden, Metall. Mater. Trans. A, 2002, vol. 33, pp. 57-71.10.1007/s11661-002-0005-9 ↗
9. C. Mapelli, S. Barella, R. Venturin, ISIJ International, 2005, vol. 45, pp. 1727-35.10.2355/isijinternational.45.1727 ↗
10. N. Jia, R.L. Peng, Y.D. Wang, S. Johansson, P.K. Liaw, Acta Mater., 2008, vol. 56, pp. 782-93.10.1016/j.actamat.2007.10.040 ↗
11. H. Inoue, S. Fukwshima, N. Inakazu, Mater. Trans. JIM, 1992, vol. 33, pp. 129-37.10.2320/matertrans1989.33.129 ↗
12. N. Gey, M. Humbert, M.J. Phillip, Y. Combres, Mater. Sci. Eng. A, 1996, vol. 219, pp. 80-88.10.1016/S0921-5093(96)10388-9 ↗
13. S. Suwas, R. K. Ray, Metall. Mater. Trans. A, 2000, vol. 31, pp. 2339-50.10.1007/s11661-000-0149-4 ↗
14. S. Suwas, R.K. Ray, A.K. Singh, S. Bhargava, Acta Mater., 1999, vol. 47, pp. 4585-98.10.1016/S1359-6454(99)00327-4 ↗
15. H.-G. Brokmeier, Mater. Sci. Eng. A, 1994, vol. 175, pp. 131-139.10.1016/0921-5093(94)91052-9 ↗
16. R.A. Lebensohn, G.R. Canova, Acta Mater., 1997, vol. 45, pp. 3687-94.10.1016/S1359-6454(97)00067-0 ↗
17. H.-G. Brokmeier, R.E. Bolmaro, J.A. Signorelli, A. Fourty, Physica B: Condensed Matter, 2000, vol. 276-278, pp. 888-889.10.1016/S0921-4526(99)01540-9 ↗
18. B. Commentz, C. Hartig, H. Mecking, Comp. Mater. Sci., 1999, vol. 16, pp. 237-47.10.1016/S0927-0256(99)00066-X ↗
19. C. Hartig, H. Mecking, Comp. Mater. Sci., 2005, vol. 32, pp. 370-377.10.1016/j.commatsci.2004.09.030 ↗
20. Y. Schneider, A. Bertram, T. Bohlke, C. Hartig, Comp. Mater. Sci., 2010, vol. 48, pp. 456-65.10.1016/j.commatsci.2010.01.005 ↗
21. R.E. Bolmaro, A. Fourty, J.W. Signorelli, H.-G. Brokmeier, Model. Simu. Mater. Sci. Eng., 2006, vol. 14, pp. 1-20.
22. C.W. Sinclair, J.D. Embury, G.C. Weatherly, K.T. Conlon, O. Engler, Mater. Sci. Tech., 2003, vol. 19, pp. 1321-29.10.1179/026708303225007906 ↗
23. M. Kiran Kumar, I. Samajdar, N. Venkatramani, G.K. Dey, R. Tewari, D. Srivastava, S. Banerjee, Acta Mater., 2003, vol. 51, pp. 625-40.10.1016/S1359-6454(02)00442-1 ↗
24. J.L.W. Warwick, J. Coakley, S.L Raghunathan, R.J Talling, D. Dye, Acta Mater., 2012, vol. 60, pp. 4117-27.10.1016/j.actamat.2012.03.039 ↗
25. J. Kadkhodapour, S. Schmauder, D. Raabe, S. Ziaei-Rad, U. Weber, M. Calcaguotto, Acta Mater., 2011, vol. 59, pp. 4387-94.10.1016/j.actamat.2011.03.062 ↗
26. R. Garg, S. Ranganathan, S. Suwas, Mater. Sci. Eng. A, 2010, vol. 527, pp. 4582-92.10.1016/j.msea.2010.04.012 ↗
27. D Raabe, K. Mivake, H. Takahara, Mater. Sci. Eng. A, 2009, vol. 291, pp. 186-97.10.1016/S0921-5093(00)00981-3 ↗
28. D. Raabe, S. Ohsaki, K. Hono, Acta Mater., 2009, vol. 57, pp. 5254-63.10.1016/j.actamat.2009.07.028 ↗
29. N. Jia, F. Roters, P. Eisenlohr, D. Raabe, X. Zhao, Acta Mater., 2013, vol. 61, pp. 4591-4606.10.1016/j.actamat.2013.04.029 ↗
30. J. Wang, I.J. Beyerlein, N.A. Mara, D. Bhattacharyya, Scripta Mater., 2001, vol. 64, pp. 1083-86.10.1016/j.scriptamat.2011.02.025 ↗
31. P.M. Anderson, J.F. Bingert, A. Misra, J.P. Hirth, Acta Mater., 2003, vol. 51, pp. 6059-75.10.1016/S1359-6454(03)00428-2 ↗
32. A. Misra, J.P. Hirth, R.G. Hoagland, J.D. Embury, H. Kung, Acta Mater., 2004, vol. 52, pp. 2387-94.10.1016/j.actamat.2004.01.029 ↗
33. A. Misra, J.P. Hirth, R.G. Hoagland, Acta Mater., 2006, vol. 53, pp. 4817-24.10.1016/j.actamat.2005.06.025 ↗
34. I.J. Beyerlein, N.A. Mara, D. Bhattacharyya, D.J. Alexander, C.T. Necker, Int. J. Plast., 2011, vol. 27, pp. 121-46.10.1016/j.ijplas.2010.05.007 ↗
35. I.J. Beyerlein, J.R. Mayeur, S Zheng, N.A. Mara, J. Wang, A. Misra, Proc. Nat. Acad. Sci., 2014, vol. 111, pp. 4386-90.10.1073/pnas.1319436111 ↗
36. C.C. Tasan, J.P.M. Hoefnagels, M. Diehl, D. Yan, F. Roters, D. Raabe, Int. J. Plast., 2014, vol. 63, pp. 198-210.10.1016/j.ijplas.2014.06.004 ↗
37. K. Pawlik, Phys Stat. Sol. (B), 1986, vol. 134, pp. 477-83.10.1002/pssb.2221340205 ↗
38. C.N. Tomè, G.R. Canova, U.F. Kocks, N. Christodoulou, J.J. Jonas, Acta Metall., 1984, vol. 32, pp. 1637-53.10.1016/0001-6160(84)90222-0 ↗
39. R.A. Lebensohn, C.N. Tomè, Acta Metall. Mater., 1993, vol. 41, pp. 2611-24.10.1016/0956-7151(93)90130-K ↗
40. R.A. Lebensohn, G.R. Canova, Acta Mater., 1997, vol. 45, pp. 3687-94.10.1016/S1359-6454(97)00067-0 ↗
41. G. Kurdjumov, G. Sachs, Zeitschridft fuer Physik, 1930, vol. 64, pp. 325-43.10.1007/BF01397346 ↗
42. W.G. Burgers, Physica, 1934, vol. 1, pp. 561-86.10.1016/S0031-8914(34)80244-3 ↗
43. G. Wasserman, Z. Metallkunde, 1963, vol. 54, pp. 61-65.
44. T. Leffers, A. Grum-Jensen, Trans. Metall. Soc. AIME, 1968, vol. 242, pp. 314-19.
45. O. Engler, Acta Mater., 2000, vol. 48, pp. 4827-40.10.1016/S1359-6454(00)00272-X ↗
46. E. El-Danaf, S.R. Kalidindi, R.D. Doherty, C. Necker, Acta Mater., 2002, vol. 48, pp. 2665-73.10.1016/S1359-6454(00)00050-1 ↗
47. T. Leffers, R.K. Ray, Prog. Mater. Sci., 2009, vol. 54, pp. 351-96.10.1016/j.pmatsci.2008.09.002 ↗
48. C. Donadille, R. Valle, P. Dervin, R. Penelle, Acta Metall., 1989, vol. 37, pp. 1547-71.10.1016/0001-6160(89)90123-5 ↗
49. C.D. Singh, V. Ramaswamy, C. Suryanarayana, Textures and Microstructures, 1992, vol. 9, pp. 101-21.10.1155/TSM.19.101 ↗
50. T. Leffers, D. Juul Jensen: Proc. Inter. Conf. on Texture of Materials-7, Netherlands Society for Materials Science, Zwijndrecht, 1984, pp. 805–10.
51. J.W. Christian, S. Mahajan, Prog. Mater. Sci., 1995, vol. 39, pp. 1-157.10.1016/0079-6425(94)00007-7 ↗