journal article·2016-08

Burst Ductility of Zirconium Clads: The Defining Role of Residual Stress

Gulshan Kumar, A. K. Kanjarla, Arijit Lodh, Jaiveer Singh, Ramesh Singh, D. Srivastava, G. K. Dey, N. Saibaba, R. D. Doherty, Indradev Samajdar

Publisher page

Abstract

Closed end burst tests, using room temperature water as pressurizing medium, were performed on a number of industrially produced zirconium (Zr) clads. A total of 31 samples were selected based on observed differences in burst ductility. The latter was represented as total circumferential elongation or TCE. The selected samples, with a range of TCE values (5 to 35 pct), did not show any correlation with mechanical properties along axial direction, microstructural parameters, crystallographic textures, and outer tube-surface normal (σ 11) and shear (τ 13) components of the residual stress matrix. TCEs, however, had a clear correlation with hydrostatic residual stress (P h), as estimated from tri-axial stress analysis on the outer tube surface. Estimated P h also scaled with measured normal stress (σ 33) at the tube cross section. An elastic–plastic finite element model with ductile damage failure criterion was developed to understand the burst mechanism of zirconium clads. Experimentally measured P h gradients were imposed on a solid element continuum finite element (FE) simulation to mimic the residual stresses present prior to pressurization. Trends in experimental TCEs were also brought out with computationally efficient shell element-based FE simulations imposing the outer tube-surface P h values. Suitable components of the residual stress matrix thus determined the burst performance of the Zr clads.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nuclear Materials and Properties · High-Velocity Impact and Material Behavior · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (71)

Show source-provided references
1. D. O. Northwood and U. Kosasih, Int. Met. Rev.,1983, vol. 28, pp. 92-121.10.1179/imr.1983.28.1.92 ↗
2. B. Verlinden, J. Driver, I. Samajdar, R. D. Doherty: Thermo-Mechanical Processing of Metallic Materials, (Elsevier, Amsterdam, 2007).
3. J. A. L. Robertson, J. Nucl. Mater.,1981, vol. 100, pp. 108-118.10.1016/0022-3115(81)90525-0 ↗
4. C.O. Smith: Nuclear Reactor Materials, Addison-Wesley Publishing Company, 1967.
5. D. O. Northwood, Mater. Design,1985, vol. 6, pp. 58-70.10.1016/0261-3069(85)90165-7 ↗
6. B.A. Cheadle: Zirconium in the Nuclear Industry, ASTM STP 633, 1977, pp. 457–85.10.1520/STP35586S ↗
7. S. K. Yagnik, A. Hermann and R. C. Kuo, J. ASTM Int.,2005, vol. 2, pp. 1-26.10.1520/JAI12423 ↗
8. T. Andersson and A. Wilson: Zirconium in the Nuclear Industry, ASTM STP 681, 1979, pp. 60–71.10.1520/STP36672S ↗
9. M. Nakatsuka, M. Aita, K. Sakamoto and T. Higuchi, J. Nucl. Mater.,2013, vol. 434, pp. 303-310.10.1016/j.jnucmat.2012.11.045 ↗
10. O. K. Källström, J. Nucl. Mater., 1969, vol. 31, pp. 111-113.10.1016/0022-3115(69)90049-X ↗
11. D. Hardy, J. Stewart, and A. Lowe, Jr.: Zirconium in Nuclear Applications, ASTM STP 551, 1974, pp. 14–30.10.1520/STP32100S ↗
12. Y. Zhou, B. Devarajan and K. Murty, Nucl. Eng. Des.,2004, vol. 228, pp. 3-13.10.1016/j.nucengdes.2003.06.013 ↗
13. G.F. Slattery: Applications-Related Phenomena for Zirconium and Its Alloys, ASTM STP, 1969, vol. 458, pp. 95–110.10.1520/STP43822S ↗
14. C. S. Seok, B. K. Bae, J. M. Koo and K. L. Murty, Eng. Fail. Anal.,2006, vol. 13, pp. 389-397.10.1016/j.engfailanal.2005.02.009 ↗
15. D. Hardy and A. Bain: Zirconium in the Nuclear Industry, ASTM STP 633, 1977, pp. 98–118.10.1520/STP35567S ↗
16. A. Brownrigg, W. Spitzig, O. Richmond, D. Teirlinck and J. Embury, Acta Metall.,1983, vol. 31, pp. 1141-1150.10.1016/0001-6160(83)90176-1 ↗
17. P. V. Dembowski, J. Pepe and T. E. Davidson, Acta Metall.,1974, vol. 22, pp. 1121-1131.10.1016/0001-6160(74)90067-4 ↗
18. M. Furugen and C. Hayashi, J. Mech. Work. Technol.,1984, vol. 10, pp. 273-286.10.1016/0378-3804(84)90043-3 ↗
19. P. Bridgman, J. Appl. Phys.,1953, vol. 24, pp. 560-570.10.1063/1.1721329 ↗
20. P. W. Bridgman: Studies in Large Plastic Flow and Fracture with Special Emphasis on the Effects of Hydrostatic Pressure (McGraw-Hill, London, 1952).
21. L. Hu, J. Mech. Phys. Solids,1956, vol. 4, pp. 96-103.10.1016/0022-5096(56)90082-5 ↗
22. H.L.D. Pugh: ASTM Spec. Tec. Publ., 1965, vol. 374, pp. 68–140.10.1639/0007-2745(1965)68[374:U]2.0.CO;2 ↗
23. G.E. Dieter and D. Bacon: Mechanical Metallurgy, (McGraw-Hill, New York, 1986).
24. PanalyticalTM X’Pert Stress Plus Software Package.
25. V. Hauk: Structural and Residual Stress Analysis by Nondestructive Methods: Evaluation-Application-Assessment, (Elsevier, Amsterdam, 1997), pp. 129-215.10.1016/B978-044482476-9/50007-4 ↗
26. ASTM A: Standard Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding, ASTM International, Metals Park, OH, 2007, vol. B811-02, p. 16.
27. ASTM A: Standard Test Methods for Tension Testing of Metallic Materials, ASTM International, Metals Park, OH, 2011, p. 28.
28. H. J. Bunge: Texture Analysis in Materials Science: Mathematical Methods, (Elsevier, Amsterdam, 2013).
29. D. Raabe and K. Lücke, Phys. Status Solidi (b), 1993, vol. 180, pp. 59-65.10.1002/pssb.2221800103 ↗
30. K. Pawlik, Physica status solidi (b),1986, vol. 134, pp. 477-483.10.1002/pssb.2221340205 ↗
31. K. Pawlik, J. Pospiech, and K. Lücke, Texture Microstruct.,1991, vol. 14, pp. 25-30.10.1155/TSM.14-18.25 ↗
32. K. Pawlik, J. Pospiech, and K. Lücke: Proc. ICOTOM, 1988, pp. 105–10.
33. K. Pawlik: Fundamentals of 3-D Texture Analysis, LaboTex, Version 3.0, pp. 1–7.
34. K. M. Krishna, D. Srivastava, G. Dey, V. Hiwarkar, I. Samajdar and N. Saibaba, J. Nucl. Mater.,2011, vol. 414, pp. 492-497.10.1016/j.jnucmat.2011.04.065 ↗
35. D. Tech and G. Yvette, Texture Microstruct.,1990, vol. 12, pp. 125-140.10.1155/TSM.12.125 ↗
36. I. C. Noyan and J. B. Cohen: Residual Stress Measurement by Diffraction and Interpretation,, (Springer, New York, 1987), pp. 117-163.
37. B. D. Cullity and S. R. Stock: Elements of X-ray Diffraction, (Pearson, Prentice Hall NJ, 2001).
38. P. Van Houtte and L. De Buyser, Acta Metall. Mater.,1993, vol. 41, pp. 323-336.10.1016/0956-7151(93)90063-X ↗
39. P. S. Prevéy, Developments in Materials Characterization Technologies. ASM International, Materials Park, OH, 1996, pp. 103-110.
40. M. R. James and J. B. Cohen, In Treatise on Materials Science and Technology, (Elsevier, New York, 1978), pp 1-62.
41. C. Balasingh and A. Singh, Met. Mater. Process,2000, vol. 12, pp. 269-280.
42. P. J. Withers and H. Bhadeshia, Mater. Sci. Technol.,2001, vol. 17, pp. 355-365.10.1179/026708301101509980 ↗
43. H. Suzuki, K. Akita and H. Misawa, Jpn. J. Appl. Phys.,2003, vol. 42, pp. 2876-2880.10.1143/JJAP.42.2876 ↗
44. H. Suzuki, K. Akita and H. Misawa, Mater. Sci. Res. Int.,2000, vol. 6, pp. 255-262.
45. M. Imafuku, H. Suzuki, K. Sueyoshi, K. Akita and S. I. Ohya, Appl. Phys. Lett.,2008, vol. 92, p. 231903.10.1063/1.2912030 ↗
46. S. Pan and R. Weil, Acta Cryst.,1971, vol. 27, pp. 578-585.10.1107/S0567739471001293 ↗
47. I. C. Noyan, Metall. Trans. A,1983, vol. 14, pp. 249-258.10.1007/BF02651622 ↗
48. H. Dölle, J. Appl. Crystallogr.,1979, vol. 12, pp. 489-501.10.1107/S0021889879013169 ↗
49. H. Dölle and J. B. Cohen, Metall. Mater. Trans. A,1980, vol. 11, pp. 159-164.10.1007/BF02700452 ↗
50. I. C. Noyan, Metall. Trans. A,1983, vol. 14, pp. 1907-1914.10.1007/BF02645562 ↗
51. H. Dölle and J. B. Cohen, Metall. Trans. A,1980, vol. 11, pp. 831-836.10.1007/BF02661212 ↗
52. BrukerTM: Diffrac-Plus LEPTOS Software Package.
53. J.L.C. Robert, H. Wagoner: Fundamentals of Metal Forming, (Wiley, New York, 1997), pp. 88-113.
54. A. Baczmanski, C. Braham, W. Seiler and N. Shiraki, Surf. Coat. Technol.,2004, vol. 182, pp. 43-54.10.1016/j.surfcoat.2003.07.005 ↗
55. D. Kohli, R. Rakesh, V. Sinha, G. Prasad and I. Samajdar, Journal of Nuclear Materials,2014, vol. 447, pp. 150-159.10.1016/j.jnucmat.2014.01.002 ↗
56. U. Welzel, J. Ligot, P. Lamparter, A. Vermeulen and E. Mittemeijer, J. Appl. Crystallogr., 2005, vol. 38, pp. 1-29.10.1107/S0021889804029516 ↗
57. P. Gergaud, P. Goudeau, O. Sicardy and N. Tamura, Int. J. Mater. Prod. Tec.,2006, vol. 26, pp. 354-371.10.1504/IJMPT.2006.009475 ↗
58. B. Kania, P. Indyka, L. Tarkowski and E. Beltowska-Lehman, J. Appl. Crystallogr., 2015, vol. 48. 71-7810.1107/S1600576714025722 ↗
59. C. H. Ma, J. H. Huang and H. Chen, Thin Solid Films,2002, vol. 418, pp. 73-78.10.1016/S0040-6090(02)00680-6 ↗
60. ABAQUS Documentation, Providence, 2006.
61. K. J. Bathe and E. N. Dvorkin, Int. J. Numer. Meth. Eng.,1986, vol. 22, pp. 697-722.10.1002/nme.1620220312 ↗
62. E. N. Dvorkin and K. J. Bathe, Eng. Computation,1984, vol. 1, pp. 77-88.10.1108/eb023562 ↗
63. E.N. Dvorkin and R.G. Toscano: Finite Element Analysis of the Collapse and Post-collapse Behavior of Steel Pipes: Applications to the Oil Industry, Springer, Berlin, 2013, pp. 9–21.10.1007/978-3-642-37361-9_2 ↗
64. U.F. Kocks, C.N. Tomé, and H.R. Wenk: Texture and Anisotropy: Preferred Orientations in Polycrystals and Their Effect on Materials Properties, Cambridge University Press, Cambridge, 2000.
65. K. L. Murty and I. Charit, Progress in Nuclear Energy,2006, vol. 48, pp. 325-359.10.1016/j.pnucene.2005.09.011 ↗
66. Y. N. Wang, Mater. Chem. Phys.,2003, vol. 81, pp. 11-26.10.1016/S0254-0584(03)00168-8 ↗
67. E. Tenckhoff: Deformation Mechanisms, Texture, and Anisotropy in Zirconium and Zircaloy, ASTM International, Metals Park, OH, 1988.
68. J.J. Kearns: Thermal Expansion and Preferred Orientation in Zircaloy, Pittsburgh, PA, 1965, pp. WAPD-TM-472.
69. P. Delobelle, P. Robinet, P. Geyer and P. Bouffioux, J. Nucl. Mater.,1996, vol. 238, pp. 135-162.10.1016/S0022-3115(96)00450-3 ↗
70. P. Tempest, J. Nucl. Mater.,1980, vol. 92, pp. 191-200.10.1016/0022-3115(80)90102-6 ↗
71. C. C. Bampton, M. W. Mahoney, C. H. Hamilton, A. K. Ghosh and R. Raj, Metall. Trans. A,1983, vol. 14, pp. 1583-1591.10.1007/BF02654385 ↗