Nucleation and Growth of Graphite in Eutectic Spheroidal Cast Iron: Modeling and Testing
Source abstract
Abstract
A new model of graphite growth during the continuous cooling of eutectic spheroidal cast iron is presented in this paper. The model considers the nucleation and growth of graphite from pouring to room temperature. The microstructural model of solidification accounts for the eutectic as divorced and graphite growth rate as a function of carbon gradient at the liquid in contact with the graphite. In the solid state, the microstructural model takes into account three stages for graphite growth, namely (1) from the end of solidification to the upper bound of intercritical stable eutectoid, (2) during the intercritical stable eutectoid, and (3) from the lower bound of intercritical stable eutectoid to room temperature. The micro- and macrostructural models are coupled using a sequential multiscale approach. Numerical results for graphite fraction and size distribution are compared with experimental results obtained from a cylindrical cup, in which the graphite volumetric fraction and size distribution were obtained using the Schwartz–Saltykov approach. The agreements between the experimental and numerical results for the fraction of graphite and the size distribution of spheroids reveal the importance of numerical models in the prediction of the main aspects of graphite in spheroidal cast iron.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. ASTM A247-10: ASTM International, West Conshohocken, PA, 2010. doi:10.1520/A0247-10.10.1520/A0247-10 ↗
2. D.M. Stefanescu and C.S. Kanetkar: in Computer Simulation of Microstructural Evolution, D.J. Srolovitz, eds., TMS, Warrendale, PA, 1985, pp. 171–88.
3. B. C. Liu, H. D. Zhao, W. Y. Liu, and D. T. Wang: Int. J. Cast Met. Res., 1999, vol. 11(5), pp. 471-76.10.1080/13640461.1999.11819319 ↗
4. S. Chang, D. Shangguan, and D. M. Stefanescu: AFS Trans., 1991, vol. 99, pp. 531-41.
5. S. Chang, D. Shangguan, and D. M. Stefanescu: Metall. Trans. A, 1992, vol. 23A, pp. 1333-46.10.1007/BF02665065 ↗
6. A. Almansour, K. Matsugi, T. Hatayama, and O. Yanagisawa: Mater. Trans., JIM, 1996, vol. 37(4), pp. 612–19.10.2320/matertrans1989.37.612 ↗
7. D. Venugopalan: in The Physical Metallurgy of Cast Iron. Proceedings of the Fourth International Symposium on the Physical Metallurgy of Cast Iron, G. Ohira, T. Kusakawa, E. Niyama, eds., Materials Research Society, Tokyo, Japan, 1989, pp. 271–78.
8. D. Venugopalan: Metall. Trans. A, 1990, vol. 21A, pp. 913-18.10.1007/BF02656575 ↗
9. M. Wessen and I. L. Svensson: Metall. Trans. A, 1996, vol. 27A, pp. 2209-20.10.1007/BF02651875 ↗
10. J. Lacaze and V. Gerval: ISIJ Int., 1998, vol. 38(7), pp. 714-22.10.2355/isijinternational.38.714 ↗
11. P.M. Dardati: Ph.D. Thesis, Facultad de Ciencias Exactas Físicas y Naturales, Universidad Nacional de Córdoba, 2005.
12. F.D. Carazo: Ph.D. Thesis, Facultad de Ciencias Exactas Físicas y Naturales, Universidad Nacional de Córdoba, 2012.
13. D. Celentano, E. Oñate, and S. Oller: Int. J. Num. Meth. Eng., 1994, vol. 37, pp. 3441-65.10.1002/nme.1620372004 ↗
14. R. Hill: J. Mech. Phys. Solids, 1965, vol. 13(4), pp. 213-22.10.1016/0022-5096(65)90010-4 ↗
15. F. D. Carazo, P. M. Dardati, D. J. Celentano, and L. A. Godoy: Metall. Trans. B, 2012, vol. 43(6), pp. 1579-95. doi:10.1007/s11663-012-9710-y.10.1007/s11663-012-9710-y ↗
16. B. Lux: AFS Cast Met. Res. J., 1972, vol. 8(1), pp. 25-38.
17. B. Lux: AFS Cast Met. Res. J., 1972, vol. 8(2), pp. 49-65.
18. D.M. Stefanescu and D.K. Bandyopadhyay: in The Physical Metallurgy of Cast Iron. Proceedings of the Fourth International Symposium on the Physical Metallurgy of Cast Iron, G. Ohira, T. Kusakawa, E. Niyama, eds., Materials Research Society, Tokyo, Japan, 1989, pp. 15–26.
19. J.A. Sikora, G.L. Rivera, and H. Biloni: in F. Weinberg Int. Symp. on Solidification Processing, J.E. Lait and I.V. Samarasekera, eds., Pergmon Press, Inc., New York, NY, 1990, pp. 280-88.10.1016/B978-0-08-040413-4.50030-0 ↗
20. D. K. Banerjee and D. M. Stefanescu: AFS Trans., 1991, vol. 99, pp. 747-59.
21. Z. Jiyang: Acta Metall. Sin., 1989, vol (4), pp. 261–65.
22. D. M. Stefanescu: J. Mater. Sc. Eng. A, 2005, vol. 413-414, pp. 322-33.10.1016/j.msea.2005.08.180 ↗
23. R.W. Cahn and P. Haasen (eds.): Physical Metallurgy, vol. 1, 4th ed., Elsevier, Amsterdan, The Netherlands, 1996, p. 767.
24. W. Kurz and D. J. Fisher: Fundamentals of Solidification, 1 st ed., Trans. Tech. Public., Switzerland, 1984, pp. 98.
25. G. Lesoult, M. Castro, and J. Lacaze: Acta Mater., 1998, vol. 46(3), pp. 983-95.10.1016/S1359-6454(97)00281-4 ↗
26. K.C. Su, I. Ohnaka, I. Yamanuchi, and T. Fukusaco: in The Physical Metallurgy of Cast Iron, H. Fredriksson and M. Hillert, eds., Proc. Materials Research Society, Nort Holland, 1985, pp. 181–189.
27. E. Fras: in The Physical Metallurgy of Cast Iron, H. Fredriksson and M. Hillert, eds., Proc. Materials Research Society, Nort Holland, 1985, pp. 191–99.
28. H. Fredriksson and I.L. Svensson: in The Physical Metallurgy of Cast Iron, H. Fredriksson and M. Hillert, eds., Proc. Materials Research Society, Nort Holland, 1985, pp. 273–84.
29. M. Castro, P. Alexandre, J. Lacaze, and G. Lesoult: in The Physical Metallurgy of Cast Iron. Proceedings of the Fourth International Symposium on the Physical Metallurgy of Cast Iron, G. Ohira, T. Kusakawa, E. Niyama, eds., Materials Research Society, Tokyo, Japan, 1989, pp. 433–40.
30. E. Frás, W. Kapturkiewicz, and H. F. Lopez: AFS Trans., 1992, vol. 100, pp. 583-91.
31. Y. Zhang, S.V. Subramanian, and G.R. Purdy: in The Physical Metallurgy of Cast Iron, G. Lesoult and J. Lacaze, eds., Trans. Tech. Public, Switzerland, 1994, pp. 461–68.
32. A. Almansour, K. Matsugi, T. Hatayama, and O. Yanagisawa: Mater. Trans., JIM, 1995, vol. 36(12), pp. 1487–95.10.2320/matertrans1989.36.1487 ↗
33. L. Wenzhen and L. Baicheng: in Proceedings of the Technical Forum, 62nd World Foundry Congress, American Foundrymen’s Soc., Inc., Philadelphia, USA, 1996, pp. 2–10.
34. R. Aagaard, J. Hattel, W. Schafer, I. L. Svensson, and P. N. Hansen: AFS Trans., 1996, vol. 104, pp. 659-67.
35. C. Charbon and M. Rappaz: Adv. Mater. Res. (Durnten-Zurich, Switz.), 1997, vol. 4–5, pp. 453–60.10.4028/www.scientific.net/AMR.4-5.453 ↗
36. E. Frás, W. Kapturkiewicz, and A. Burbelko: Adv. Mater. Res. (Durnten-Zurich, Switz.), 1997, vol. 4–5, pp. 499–504.10.4028/www.scientific.net/AMR.4-5.499 ↗
37. J. Liu and R. Elliot: J. Cryst. Growth, 1998, vol. 191, pp. 261-67.10.1016/S0022-0248(97)00860-9 ↗
38. J. Lacaze, M. Castro, and G. Lesoult: Acta Mater., 1998, vol. 46(3), pp. 997-1010.10.1016/S1359-6454(97)00282-6 ↗
39. I. Ohnaka: Int. J. Cast Met. Res., 1999, vol. 11(5), pp. 267-72.10.1080/13640461.1999.11819284 ↗
40. M. I. OnsoØien, O. Grong, O. Gundersen, and T. Skaland: Metall. Trans. A, 1999, vol. 30A, pp. 1053-68.10.1007/s11661-999-0158-x ↗
41. J. Čech and L. Zemčík: Solidif. Metals Alloys, 2000, vol. 2(44), pp 39–44.10.1595/003214000X4413939 ↗
42. H. Zhao and B. Liu: ISIJ Int., 2001, vol. 41(9), pp. 986-91.10.2355/isijinternational.41.986 ↗
43. H. Zhao and B. Liu: Int. J. Cast Met. Res., 2003, vol.16(13), pp. 281-86.10.1080/13640461.2003.11819596 ↗
44. P. M. Dardati, L. A. Godoy, and D. J. Celentano: J. Appl. Mech, 2006, vol. 73(6), pp. 977-83.10.1115/1.2189876 ↗
45. R. W. Heine; AFS Trans., 1986, vol. 94, pp. 391-402.
46. A. Hultgren: Trans. ASM., 1947, vol. 39, pp. 915-89.
47. A. Fick: Ann. Phys. (Berlin, Ger.), 1855, vol. 170(1), pp. 59–86.10.1002/andp.18551700105 ↗
48. P. G. Shewmon: Diffusion in Solids, 2 nd ed., John Wiley & Sons, New York, NY, 1989, pp. 28.
49. M. Abramoff, P. Magalhaes, and S. Ram: Biophotonics International, 2004, vol. 11(7), pp. 36-42.
50. C. A. Schneider, W. S. Rasband, and K. W. Eliceiri: Nat. Methods, 2012, vol. 9(7), pp. 671-75. doi:10.1038/nmeth.2089.10.1038/nmeth.2089 ↗
51. E. E. Underwood: Quantitative Stereology, 1st ed., Addison-Wesley, Reading, Massachusetts, 1970, pp. 119.
52. D. M. Stefanescu: Science and Engineering of Casting Solidification, 2 nd ed., Springer, USA, 2009, pp. 21.
53. A.S. Pandit: Ph.D. Thesis, Department of Materials Science and Metallurgy, University of Cambridge, 2011.
54. J. J. Kramer, G. M. Pound, and R. F. Mehl: Acta Metall., 1958, vol. 6(12), pp. 763-71.10.1016/0001-6160(58)90051-8 ↗