Verification of the Mechanism of Grain Refinement by Ultrasonic Treatment of Aluminum-4 Wt Pct Silicon Molten Alloy
Source abstract
Abstract
Ultrasonic treatment (UST) of molten metals produces a fine grain microstructure. Several mechanisms of grain refining by UST have been suggested; however, experimental verification has not yet established the actual mechanism. In this study, UST was applied to Al-4 wt pct Si molten alloy (1) above the liquidus temperature, (2) during undercooling before recalescence, (3) during recalescence, and (4) after recalescence. After UST treatment, the average grain sizes of the solidified samples were measured, and the effects of UST were evaluated. In the case of (1), the temperatures of the crucible, ultrasonic horn, and the atmosphere of the molten alloy were also confirmed above the liquidus temperature, and a finer grain structure was obtained. This result reveals that UST promotes the nonequilibrium nucleation mechanism. UST during (2) and (3) also caused finer grain microstructures, whereas (4) did not. UST during undercooling hastened nucleation. However, the previously reported mechanism of the breaking dendrite was not activated by UST after recalescence.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. G.I. Eskin and D.G. Eskin: Ultrason. Sonochem., 2003, vol. 10, pp. 297-301.10.1016/S1350-4177(02)00158-X ↗
2. A. Ramirez, M. Qian, B. Davies, T. Wilks, and D.H. St. John: Scripta Mater., 2008, vol. 59, pp. 19-22.10.1016/j.scriptamat.2008.02.017 ↗
3. Y. Fukui, Y. Tsunekawa, and M. Okumiya: Adv. Mater. Res., 2010, vol. 89, pp. 190-5.10.4028/www.scientific.net/AMR.89-91.190 ↗
4. Y. Hori and I. Uezawa: Jpn. Inst. Metal., 1959, vol. 23, pp. 168-72.10.2320/jinstmet1952.23.3_168 ↗
5. T. Araki: J. Jpn. Inst. Light Met., 1961, vol. 11, pp. 246–53.10.2464/jilm.11.246 ↗
6. O.V. Abramov: Ultrasonics, 1987, vol. 25, pp. 73-82.10.1016/0041-624X(87)90063-1 ↗
7. G.I. Eskin: Ultrason. Sonochem., 1994, vol. 1, pp. 59-63.10.1016/1350-4177(94)90029-9 ↗
8. C. Liu, Y. Pan, and S. Aoyama: 5th International Conference on Semi-Solid Processing Alloys and Composites, 1998, pp. 439–47.
9. Y. Osawa, S. Takamori, K. Minagawa, and T. Hibaru: J. JFS., 2013, vol. 85, pp. 255–60.
10. Y. Osawa, S. Takamori, K. Minagawa, and S. Mukai: Japan Patent Kokai 2008-200692.
11. X. Jian, H. Xu, T.T. Meek, and Q. Han: Mater. Lett., 2005, vol. 59, pp. 190-3.10.1016/j.matlet.2004.09.027 ↗
12. M. Faraji, D.G. Eskin, and L. Katgerman: Giessereiforschung, 2010, vol. 62, pp. 20-5.
13. L. Xin-Tao, L. Ting-Ju, L. Xi-Meng, and J. Jun-Ze: Ultrason. Sonochem., 2006, vol. 13, pp. 121-5.10.1016/j.ultsonch.2005.08.005 ↗
14. L. Jun-Wen, T. Momono, F. Ying, J. Zheng, and Y. Tayu: Trans. Nonferr. Metal. Soc. China, 2007, vol. 17, pp. 691-7.10.1016/S1003-6326(07)60158-7 ↗
15. W. Khalifa, Y. Tsunekawa, and M. Okumiya: Int. J. Cast Metal. Res., 2008, vol. 21, pp. 129-34.10.1179/136404608X361819 ↗
16. T.V. Atamanenko, D.G. Eskin, L. Zhang, and L. Katgerman: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 2056-66.10.1007/s11661-010-0232-4 ↗
17. L. Zhang, D.G. Eskin, A. Miroux, and L. Katgerman: Light Metals, 2012, pp. 999-1004.10.1002/9781118359259.ch174 ↗
18. Da. Shu, B. Sun, J. Mi, and P.S. Grant: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 3755-66.10.1007/s11661-012-1188-3 ↗
19. J. Mi, D. Tan, and T.L. Lee: Metall. Mater. Trans. B, 2014, vol. 46B, pp. 1615–19.10.1007/s11663-014-0256-z ↗
20. K. Yasuda, Y. Saiki, T. Kubo, M. Kuwabara, and J. Yang: JPN. J. Appl. Phys., 2007, vol. 46, pp. 4939-44.10.1143/JJAP.46.4939 ↗
21. W. Khalifa, Y. Tsunekawa, and M. Okumiya: Am. Found. Soc., 2010, vols. 10-20, pp. 91-8.
22. S. Aoyama, G. Chih, and P. Yeh: Japan Patent Kokai 1999-11033692.
23. Y. Osawa, G. Arakane, S. Takamori, A. Sato, and O. Ohashi: J. JFS., 1999, vol. 71, pp. 98-103.
24. Y. Osawa, S. Takamori, G. Arakane, O. Umezawa, A. Sato, and O. Ohashi: J. JFS., 2000, vol. 72, pp. 187-92.
25. Y. Osawa: J. J. I. L. M., 2011, vol. 61, pp. 220–25.
26. X. Jian, T.T. Meek, and Q. Han: Scripta Mater., 2006, vol. 54, pp. 893-6.10.1016/j.scriptamat.2005.11.004 ↗
27. G.I. Eskin: Metallurgist, 2010, vol. 54, pp. 505-13.10.1007/s11015-010-9331-0 ↗
28. W. Kurz and D.J. Fisher: Fund. Solid. Trans. Tech. Publ., 1998, pp. 22–41.