Modeling C-Curves for the Growth Rate of Widmanstätten and Bainitic Ferrite in Fe-C Alloys
Source abstract
Abstract
When Zener formulated his maximum growth rate criterion for predicting the coarseness of various metallographic objects, he simplified the growth rate equations and predicted that the optimum coarseness should be twice the critical value for which all the driving force would be absorbed by interfacial energy. It is now emphasized that a composition dependence of the diffusion coefficient has a considerable influence and can result in a ratio much larger than two. Various approximations have now been removed from the growth rate equation. When applied to acicular ferrite in the Fe-C system, a C-curve for the growth rate is obtained that resembles the unusually wide C-curve obtained experimentally when information on Widmanstatten ferrite and bainite is combined. It is not necessary to explain that shape as a combination of separate curves for Widmanstatten ferrite and bainite. The main reason for the wide C-curve is the direct effect of the composition dependence of the diffusivity of carbon in austenite.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. M. Hillert: Report, Swedish Inst. Metal Res., 1960: Thermodynamics and Phase Transformations, The Selected Works of Mats Hillert, Introduction to “The Growth of Ferrite, Bainite and Martensite, J. Ågren, Y. Bréchet, C. Hutchinson, J. Philibert, and G Purdy, eds., EPD Sci., Les Ulis Cedex, 2006, pp. 111–158
2. C. Wells, W. Batz and R. F. Mehl, Trans. AIME, 1950, vol. 188, pp. 553–60.
3. C. Zener, Trans. AIME, 1946, vol. 167, pp. 550–95.
4. M. Hillert, Jernkont, Ann., 1957, vol. 141, pp. 757–89.
5. L. Kaufman, S. V. Radcliffe and M. Cohen: Decomposition of Austenite by Diffusional Processes, Eds. pp. 313–52, Interscience Publ., New York, 1962
6. M. Hillert, Acta Metallurgica, 1959, vol. 7, pp. 653–58.10.1016/0001-6160(59)90141-5 ↗
7. R. Trivedi and G. M. Pound, J Appl. Phys., 1967, vol. 38, no. 9, pp. 3569–76.10.1063/1.1710174 ↗
8. G. P. Ivantsov, Dokl Nauk SSSR, 1947, vol. 58, pp. 567–69.
9. Z-K. Liu and J. Ågren, Acta Metall., 1989, vol. 37, no. 12, pp. 3157–63.10.1016/0001-6160(89)90209-5 ↗
10. J-O. Andersson, T. Helander, L. Höglund, P. Shi and B. Sundman, Calphad, 2002, vol. 26, no. 2, pp. 273–312.10.1016/S0364-5916(02)00037-8 ↗
11. J. Ågren, Scripta Metall., 1986, vol. 20, no. 11, pp. 1507–10.10.1016/0036-9748(86)90384-4 ↗
12. M. Hillert, L. Höglund and J. Ågren, Acta Mater., 2003, vol. 51, pp. 2089–95.10.1016/S1359-6454(03)00008-9 ↗
13. M. P. Puls and J. S. Kirkaldy, Metall. Trans., 1972, vol. 3, pp. 2777–96.10.1007/BF02652844 ↗
14. H.K.D.H. Bhadeshia, Acta Metal., 1980, vol. 29, pp. 1117–30.10.1016/0001-6160(81)90063-8 ↗
15. M. Hillert, L. Höglund and J. Ågren, Metall. Mater. Trans. A, 2004, vol. 35, pp. 3693–700.10.1007/s11661-004-0275-5 ↗
16. G.P. Krielaart, J. Sietsma, S. Van der Zwaag, Mater. Sc. Eng. A, 1997, vol. 237, pp. 216–23.10.1016/S0921-5093(97)00365-1 ↗
17. E.P. Simonen, H.I. Aaronson and R. Trivedi, Metall. Trans., 1973, vol. 4, pp. 1239–45.10.1007/BF02644517 ↗
18. E. Eichen, H.I. Aaronson and G.M. Pound, Acta Metall., 1964, vol. 12, pp. 1298–30110.1016/0001-6160(64)90116-6 ↗
19. H.I. Aaronson: Decomposition of Austenite by Diffusional Processes, Eds. pp. 387-545, Interscience Publ., New York, 1962
20. R.D. Townsend and J.S. Kirkaldy, Trans. ASM, 1968, vol. 61, pp. 605–19.
21. M.J. Hawkins and J. Barford, J. Iron Steel Inst., 1972, vol. 210, pp. 97–105.
22. G.R. Speich and M. Cohen, Trans. Metall. Soc. AIME, 1960, vol. 218, pp. 1050–59.