journal article·2016-04

Microstructural and Hardness Study of Pulsed Nd:YAG Laser Surface Alloyed Aluminum with Iron

Mohammad Ansari, Reza Soltani, Mahmoud Heydarzadeh Sohi, Zia Valefi

Publisher page

Abstract

In the present study, the feasibility of the formation of surface layers containing hard iron aluminides on AA6061-T6 aluminum via pre-plasma spraying with iron and subsequently double surface melting by pulsed Nd:YAG laser is studied. The effects of single and double laser surface melting on microstructure, phase formation, and hardness of the treated layers are examined. Single-step laser treatment resulted in the presence of undissolved iron particles surrounded by lump-like Al5Fe2 and needle-like Al3Fe intermetallic compounds. Double laser surface melting dissolved the retained undissolved irons and resulted in the formation of Al-Al3Fe eutectic structure. Microhardness profiles along cross section and top surface of the treated layers indicated that laser surface alloying with iron enhanced the hardness of the aluminum to more than twice of that of the base material.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · High Entropy Alloys Studies · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. M. Heydarzadeh Sohi, M. Ansari, M. Ghazizadeh, H. Zebardast: Surf. Eng., 2015, vol. 31, pp. 598–604. doi:10.1179/1743294414Y.000000037210.1179/1743294414Y.0000000372 ↗
2. [2] H. Wang, W. Jiang, J. Ouyang, R. Kovacevic: J. Mater. Process. Technol., 2004, vol. 148, pp. 93–102. doi: 10.1016/j.jmatprotec.2004.01.05810.1016/j.jmatprotec.2004.01.058 ↗
3. S. Katakam, S.S. Joshi, S. Mridha, S. Mukherjee, N.B. Dahotre: J. Appl. Phys., 2014, vol. 116, p. 104906, DOI: 10.1063/1.489513710.1063/1.4895137 ↗
4. M.M. Quazi, M.A. Fazal, A.S.M.A. Haseeb, F. Yusof, H.H. Masjuki, A. Arslan: Crit. Rev. Solid State Mater. Sci., 2015. doi:10.1080/10408436.2015.107671610.1080/10408436.2015.1076716 ↗
5. M. Heydarzadeh Sohi: J. Mater. Process. Technol., 2001, vol. 118, pp. 187–92. doi: 10.1016/S0924-0136(01)00912-810.1016/S0924-0136(01)00912-8 ↗
6. M. Ansari, M. HeydarzadehSohi, R. Soltani, M.J. Torkamany: Int. J. Adv. Manuf. Technol., 2015. doi:10.1007/s00170-015-7516-110.1007/s00170-015-7516-1 ↗
7. R.S. Rajamure, H.D. Vora, S.G. Srinivasan, N.B. Dahotre: Appl. Surf. Sci., 2015, vol. 328, pp. 205–14. doi: 10.1016/j.apsusc.2014.12.03710.1016/j.apsusc.2014.12.037 ↗
8. [8] R.S. Rajamure, H.D. Vora, N. Gupta, S. Karewar, S.G. Srinivasan, N.B. Dahotre: Surf. Coatings Technol., 2014, vol. 258, pp. 337–42. doi: 10.1016/j.surfcoat.2014.08.07410.1016/j.surfcoat.2014.08.074 ↗
9. L. Gjønnes, A. Olsen: J. Mater. Sci., 1994, vol. 29, pp. 728–35. doi: 10.1007/BF0044598610.1007/BF00445986 ↗
10. [10] S. Tomida, K. Nakata: Surf. Coatings Technol., 2003, vol. 174 -175, pp. 559–63. doi: 10.1016/S0257-8972(03)00698-410.1016/S0257-8972(03)00698-4 ↗
11. S. Zhang and D. Zhao, eds.: Aerospace Materials Handbook, CRC Press, Boca Raton, 2012, p. 112.
12. [12] H.R. Shahverdi, M.R. Ghomashchi, S. Shabestari, J. Hejazi: J. Mater. Process. Technol., 2002, vol. 124, pp. 345–52. doi: 10.1016/S0924-0136(02)00225-X10.1016/S0924-0136(02)00225-X ↗
13. K. Bouché, F. Barbier, A. Coulet: Mater. Sci. Eng. A, 1998, vol. 249, pp. 167–75. doi: 10.1016/S0921-5093(98)00573-510.1016/S0921-5093(98)00573-5 ↗
14. J. Lee, S. Kang, T. Sato, H. Tezuka, A. Kamio: Mater. Sci. Eng. A, 2003, vol. 362, pp. 257–63. doi: 10.1016/S0921-5093(03)00639-710.1016/S0921-5093(03)00639-7 ↗
15. W. Gao, S. Zhao, Y. Wang, F. Liu, C. Zhou, X. Lin: Mater. Des., 2014, vol. 64, pp. 490–96. doi: 10.1016/j.matdes.2014.08.00410.1016/j.matdes.2014.08.004 ↗
16. S.A. Vaziri, H.R. Shahverdi, S.G. Shabestari, K. Hazeli, M.J. Torkamany: Mater. Des., 2010, vol. 31, pp. 3875–79. doi: 10.1016/j.matdes.2010.02.04010.1016/j.matdes.2010.02.040 ↗
17. A. Almeida, R. Vilar: Lasers Eng., 2008, vol. 18, pp. 49–60.
18. I.F. Bainbridge, J.A. Taylor: Metall. Mater. Trans. A, 2013, vol. 44, pp. 3901–9. doi: 10.1007/s11661-013-1696-910.1007/s11661-013-1696-9 ↗
19. S. Hirose, T. Itoh, M. Makita, S. Fujii, S. Arai, K. Sasaki, H. Saka: Intermetallics, 2003, vol. 11, pp. 633–42. doi: 10.1016/S0966-9795(03)00050-510.1016/S0966-9795(03)00050-5 ↗
20. E.G. Ivanov: Met. Sci. Heat Treat., 1979, vol. 21, pp. 449–52. doi: 10.1007/BF0078048210.1007/BF00780482 ↗
21. R.W. Richards, R.D. Jones, P.D. Clements, H. Clarke: Int. Mater. Rev., 1994, vol. 39, pp. 191–212. doi: 10.1179/imr.1994.39.5.19110.1179/imr.1994.39.5.191 ↗
22. B. Sundman, I. Ohnuma, N. Dupin, U.R. Kattner, S.G. Fries: Acta Mater., 2009, vol. 57, pp. 2896–2908. doi: 10.1016/j.actamat.2009.02.04610.1016/j.actamat.2009.02.046 ↗
23. M. Yasuyama, K. Ogawa, T. Taka: Weld. Int., 1996, vol. 10, pp. 963–70. doi: 10.1080/0950711960954912110.1080/09507119609549121 ↗
24. A. Hirose, N. Kurosawa, K.F. Kobayashi, H. Todaka, H. Yamaoka: Metall. Mater. Trans. A, 1999, vol. 30, pp. 2115–20. doi: 10.1007/s11661-999-0022-z10.1007/s11661-999-0022-z ↗
25. M.J. Cieslak, P.W. Fuerschbach: Metall. Trans. B, 1988, vol. 19, pp. 319–29. doi: 10.1007/BF0265421710.1007/BF02654217 ↗