journal article·2013-12

Numerical Simulation of Pressure Infiltration Process for Making Metal Matrix Composites Using Dual-Scale Fabrics

Bo Wang, Krishna M. Pillai

Publisher page

Abstract

Correct modeling of flow and solidification of metal melt in the pressure infiltration process (PIP) is important for accurate simulation and process optimization of the mold-filling process during the making of metal matrix composites. The fiber reinforcements used in this process often consist of fiber tows or bundles that are woven, stitched, or braided to create a dual-scale preform. The physics of melt flow in the dual-scale preform is very different from that in a single-scale preform created from a random distribution of fibers. As a result, the previous PIP simulations, which treat the preform as being single scale, are inaccurate. A pseudo dual-scale approach is presented where the melt flow through such dual-scale porous media is modeled using the conventional single-scale approach using two distinctly different permeabilities in tows and gaps. A three-dimensional finite difference model is developed to model the flow of molten metal in the dual- and single-scale preforms. To track the fluid front during the mold filling and infiltration, the volume of fluid method is used. A source-based method is used to deal with transient heat transfer and phase changes. The computational code is validated against an analytical solution and a published result. Subsequent study reveals that infiltration of an idealized dual-scale preform is marked by irregular flow fronts and an unsaturated region behind the front due to the formation of gas pockets inside fiber tows. Unlike the single-scale preform characterized by sharp temperature gradients near mold walls, the dual-scale preforms are marked by surging of high-temperature melts between tows and by the presence of sharp gradients on the gap-tow interfaces. The parameters such as the (gap-tow) permeability ratio, the (gap-tow) pore volume ratio, and the inlet pressure have a strong influence on the formation of the saturated region in the dual-scale preform.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Composite Material Mechanics · Epoxy Resin Curing Processes · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Chawla N, Chawla KK. Metal Matrix Composites. Springer-Verlag, New York, NY, 2005: 351-401.
2. Suresh S, Mortensen A, Needleman A. Fundamentals of Metal-Matrix Composites. Butterworth-Heinemann, Stoneham, MA, 1993: 3-41.
3. Mortensen A, Michaud VJ, Flemings MC. Pressure-Infiltration Processing of Reinforced Aluminum. JOM, 1993, (1): 36-43.
4. Cook AJ, Werner PS, Pressure infiltration casting of metal matrix composites, Materials science and engineering, A144(1991) 189-206.10.1016/0921-5093(91)90225-C ↗
5. Parnas RS: Liquid Composite Molding, Hanser Publications, Cincinnati, 2000.10.3139/9783446443020 ↗
6. Zhou F, Alms J, Advani S. A closed form solution for flow in dual scale fibrous porous media under constant injection pressure conditions. Compos Sci Technol. 2008; 68(3-4): 699-708.10.1016/j.compscitech.2007.09.010 ↗
7. Pillai KM. Modeling the unsaturated flow in liquid composite molding processes a review and some thoughts. J Compos Mater. 2004; 38(23): 2097-2118.10.1177/0021998304045585 ↗
8. H. Tan and K.M. Pillai. Fast liquid composite molding simulation of unsaturated flow in dual-scale fiber mats using the imbibition characteristics of a fabric-based unit cell. Polymer Composites. 2010; 31(10): 1790-1807.10.1002/pc.20971 ↗
9. H. Tan and K.M. Pillai: Compos. A Appl. Sci. Manuf., 2010. DOI:10.1016/j.compositesa.2010.12.013.10.1016/j.compositesa.2010.12.013 ↗
10. H. Tan and K.M. Pillai: Compos. A Appl. Sci. Manuf., 2011. DOI:10.1016/j.compositesa.2011.06.012.10.1016/j.compositesa.2011.06.012 ↗
11. H. Tan and K.M. Pillai: Compos. A Appl. Sci. Manuf., 2011. DOI:10.1016/j.compositesa.2011.08.008.10.1016/j.compositesa.2011.08.008 ↗
12. Binetruy C, Hilaire B, Pabiot J. Interactions between flows occurring inside and outside fabric tows during RTM. Compos Sci Technol. 1997; 57(5): 587-96.10.1016/S0266-3538(97)00019-5 ↗
13. Kuentzer N, Simacek P, Advani S G, Walsh S. Permeability characterization of dual scale fibrous porous media. Composites Part A. 2006; 37(11): 2057-68.10.1016/j.compositesa.2005.12.005 ↗
14. Tan H, Roy T, Pillai KM. Variations in unsaturated flow with flow direction in resin transfer molding: an experimental investigation. Composites Part A. 2007; 38(8): 1872-92.10.1016/j.compositesa.2007.04.002 ↗
15. Parnas RS, Phelan Jr FR. Effect of heterogeneous porous media on mold filling in resin transfer molding. SAMPE Quart. 1991; 22(2): 53-60.
16. Pillai KM, Advani SG. A model for unsaturated flow in woven fiber preforms during mold filling in resin transfer molding. J Compos Mater. 1998; 32(19): 1753-83.10.1177/002199839803201902 ↗
17. K.M. Pillai: Compos. A Appl. Sci. Manuf., 2002, vol. 33(7), pp. 1007-19.10.1016/S1359-835X(02)00034-9 ↗
18. K.M. Pillai and M.S. Munagavalasa: Compos. A Appl. Sci. Manuf., 2004, vol. 35(4), pp. 403-15.10.1016/j.compositesa.2004.01.001 ↗
19. Wang Y, Grove SM. Modelling microscopic flow in woven fabric reinforcements and its application in dual-scale resin infusion modeling. Composites Part A. 2008; 39(5): 843-55.10.1016/j.compositesa.2008.01.014 ↗
20. Mortrensen A, Masur LJ, Cornie JA, Flemings MC. Infiltration of fibrous preforms by a pure metal Part 1 theory. Metallurgical Transactions A. 1989; 20A: 2535-47.10.1007/BF02666688 ↗
21. Young WB. 3-dimensional nonisothermal mold filling simulations in resin transfer molding. Polym Compos. 1994; 15(2): 118-27.10.1002/pc.750150205 ↗
22. Kang MK, Lee WI. A flow-front refinement technique for the numerical simulation of the resin-transfer molding process. Compos Sci Technol. 1999; 59(11): 1663-74.10.1016/S0266-3538(99)00029-9 ↗
23. Bruschke MV, Advani SG. A numerical approach to model nonisothermal viscous-flow through fibrous media with free surfaces. Int. J. Numer. Methods Fluids. 1994; 19(7): 575-603.10.1002/fld.1650190704 ↗
24. Liu XL. Isothermal flow simulation of liquid composite molding. Composites Part A. 2000; 31(12): 1295-302.10.1016/S1359-835X(00)00007-5 ↗
25. Lam YC, Joshi SC, Liu XL. Numerical simulation of the mould-filling process in resin-transfer moulding. Compos Sci Technol. 2000; 60(6): 845-55.10.1016/S0266-3538(99)00192-X ↗
26. Joshi SC, Lam YC, Liu XL. Mass conservation in numerical simulation of resin flow. Compos Part A. 2000; 31(10): 1061-8.10.1016/S1359-835X(00)00067-1 ↗
27. Shojaei A, Ghaffarian SR, Karimian SMH. Numerical simulation of three-dimensional mold filling process in resin transfer molding using quasi-steady state and partial saturation formulations. Compos Sci Technol. 2002; 62(6): 861-79.10.1016/S0266-3538(02)00020-9 ↗
28. Kuan YD, El-Gizawy AS. Numerical characterization of mold injection in resin transfer molding process. Adv Polym Technol. 2000; 19(3): 173-9.10.1002/1098-2329(200023)19:3<173::AID-ADV2>3.0.CO;2-C ↗
29. Voller VR, Peng S. An algorithm for analysis of polymer filling of molds. Polym Eng Sci. 1995; 35(22): 1758-65.10.1002/pen.760352205 ↗
30. Lin M, Hahn HT, Huh H. A finite element simulation of resin transfer molding based on partial nodal saturation and implicit time integration. Compos Pt A-Appl Sci Manuf. 1998; 29(5-6): 541-50.10.1016/S1359-835X(97)00126-7 ↗
31. J. Xie, R.S. Amano, P.M.M. Das, and P.K. Rohatgi: 2005 ASME Summer Heat Transf. Conf., 2005, pp. 213–20.
32. Mortensen A, Michaud V. Infiltration of fiebr preforms by a binary alloy: Part I. Theory. Metallurgical Transactions A. 1990; 21A: 2059-72.10.1007/BF02647253 ↗
33. Jarry P, Michaud VJ, Mortensen A, Dubus A, Tirardcollet R. Infiltration of fiebr preforms by an alloy: Part 3. Die-casting experiments. Metallurgical Transactions A. 1992; 23A: 2281-9.10.1007/BF02646021 ↗
34. Michaud VJ, Mortensen A. Infiltration of fiebr preforms by a binary alloy: Part 2. Further Theory and experiments. Metallurgical Transactions A. 1992, vol. 23A, pp. 2263-80.10.1007/BF02646020 ↗
35. Sommer JL, Mortensen A. Forced unidirectional infiltration of deformable porous media. J Fluid Mech. 1996; 311: 193-217.10.1017/S002211209600256X ↗
36. V.J. Michaud, J.L. Sommer, A. Mortensen: Metall. Mater. Trans. A. 1999, vol. 30, pp. 471-82.10.1007/s11661-999-0337-9 ↗
37. Michaud V, Mortensen A. Infiltration processing of fibre reinforced composites governing phenomena. Compos Pt A-Appl Sci Manuf. 2001;32:981-96.10.1016/S1359-835X(01)00015-X ↗
38. Andrews RM, Mortensen A. Lorentz force infiltration of fibrous preforms. Metallurgical Transactions A. 1991; 22A: 2903-15.10.1007/BF02650251 ↗
39. Lacoste E, Danis M, Girot F, Quenisset JM. Numerical-simulation of the injection-molding of thin parts by liquid-metal infiltration of fibrous preforms. Mater Sci Eng A-Struct Mater Prop Microstruct Process. 1991; 135: 45-9.10.1016/0921-5093(91)90535-U ↗
40. Lacoste E, Aboulfatah M, Danis M, Girot F. Numerical-simulation of the infiltration of fibrous preforms by a pure metal. Metallurgical Transactions A. 1993; 24A: 2667-78.10.1007/BF02659491 ↗
41. Mantaux O, Lacoste E, Danis M. Heat-conduction with phase-change in a pure substance - resolution formulated with temperature terms. Rev Gen Therm. 1995; 34(402): 339-47.
42. Lacoste E, Mantaux O, Danis M. Numerical simulation of metal matrix composites and polymer matrix composites processing by infiltration: a review. Compos Pt A-Appl Sci Manuf. 2002; 33(12): 1605-14.10.1016/S1359-835X(02)00210-5 ↗
43. Lacoste E, Arvieu C, Afzali MS, Quenisset JM. Heat and mass transfer modeling and simulation during liquid route processing of SiC/Ti filamentary composites. Numerical Heat Transfer Part A. 2009; 56: 709-26.10.1080/10407780903466303 ↗
44. Tong X, Khan JA. Infiltration and solidification remelting of a pure metal in a two-dimensional porous preform. J Heat Transf-Trans ASME. 1996; 118(1): 173-80.10.1115/1.2824031 ↗
45. Khan JA, Tong XL. Unidirectional infiltration and solidification/remelting of Al-Cu alloy. J Thermophys Heat Transf. 1998; 12(1): 100-6.10.2514/2.6308 ↗
46. Lee E-K, Amano RS, Rohatgi PK. Metal matrix composite solidification in the presence of cooled fibers: numerical simulation and experimental observation. Heat and Mass Transfer. 2006; 43(8): 741-8.10.1007/s00231-005-0057-7 ↗
47. Jung CK, Jang JH, Han KS. Numerical simulation of infiltration and solidification processes for squeeze cast al composites with parametric study. Metall Mater Trans A-Phys Metall Mater Sci. 2008; 39A: 2736-48.10.1007/s11661-008-9619-x ↗
48. C.S. Marchi, M. Kouzeli, A. Miserez, B. Moser, A. Rossoll, L. Weber, and A. Mortensen: Gas-pressure metal infiltration. Invited talk: ICETS-2000 ISAM, Beijing, China, 2000, pp. 1–9.
49. Stephen W. The method of volume averaging. New York: Kluwer Academic Publishers; 1999.
50. K.M. Pillai and S.G. Advani: J. Colloid Interface Sci., 1996, vol. 183(1), pp. 100-110.10.1006/jcis.1996.0522 ↗
51. Reza M, Pillai KM, Varanasi PP. Darcy’s law-based models for liquid absorption in polymer wicks. AIChE Journal. 2007; 53(11): 2769-82.10.1002/aic.11322 ↗
52. M. Reza and K.M. Pillai: J. Porous Media, 2012, vol. 15(8), pp. 775–83.10.1615/JPorMedia.v15.i8.60 ↗
53. A. Mortensen: Solidification of Metal Matrix Composites, P. Rohatgi, ed., TMS, Warrendale, PA, 1989, pp. 1–19.
54. Grbart BR. Permeability of unidirectional reinforcements for RTM. J Compos Mater. 1992; 26: 1100-1133.10.1177/002199839202600802 ↗
55. Kaviany M. Principles of heat transfer in porous media, Springer, New York, 1995.10.1007/978-1-4612-4254-3 ↗
56. Patankar SV. Numerical heat transfer and fluid flow, Hemisphere, Washington, DC., 1980.