Optimization of the Machinability of the Al-SiC Metal Matrix Composite Using the Dynamic Material Model
Source abstract
Abstract
The dynamic material model (DMM) method has been widely used for the macroscopic description of flow, fracture, and workability of materials under hot deformation. This investigation is aimed at proposing a new methodology for the optimization of hot machinability of a material using the DMM stability criteria. The constitutive flow behavior of Al-20 pct SiC has been evaluated in the temperature range 50 °C to 350 °C and the cutting velocity in the range from 25 and 300 m/min with the view to optimizing its machinability using the DMM instability parameters. The DMM instability parameters predicted a narrow region around 150 °C and 150 m/min as the optimum domain for machining this material. It has been observed that the tool wear is minimum at optimal conditions. This investigation proved that the machinability could be optimized through the DMM.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. M.K. Brun, M. Lee: Wear, 1985, vol. 104, pp. 21–2910.1016/0043-1648(85)90243-1 ↗
2. L. Conjager, D. Master: Ann. CIRP, 1992, vol. 41, pp. 63–6610.1016/S0007-8506(07)61153-6 ↗
3. J.M. Margon, O. Reilly: Adv. Mater., 1992, vol. 2, pp. 37–46
4. N. Tomac, K. Tonnessan: Ann. CIRP, 1992, vol. 41, pp. 55–5810.1016/S0007-8506(07)61151-2 ↗
5. B.C. Ko, G.S. Park, Y.C. Yoo: J. Mater. Process. Technol., 1999, vol. 95, pp. 210–1510.1016/S0924-0136(99)00292-7 ↗
6. R. Kamunduri, D.G. Flom, M. Lee: Trans. ASME, J. Eng. Industry, 1985, vol. 107, pp. 325–3510.1115/1.3186005 ↗
7. T. Kitagawa, K. Katsukiro, A. Kubo: Bull. Jpn. Soc. Precis. Eng., 1988, vol. 22, pp. 145–51
8. W. Konig, L. Cronjagar, G. Spur, H.F. Tonsnoff, M. Vigneau: Ann. CIRP, 1990, vol. 39, pp. 673–8110.1016/S0007-8506(07)63004-2 ↗
9. K. Uchora and H. Takeshito: Ann. CIRP, 1986, vol. 35, pp. 55–5810.1016/S0007-8506(07)61837-X ↗
10. M. Vedani, E. Garibold: J. Metall. Sci. Technol., 2001, vol. 19, pp. 33–36
11. Y.V.R.K. Prasad, H.L. Gegel, S.M. Doraivelu, J.C. Malas, J.T. Morgan, K.A. Lark, D.R. Barker: Metall. Trans. A, 1984, vol. 15A, pp. 1883–9210.1007/BF02664902 ↗
12. J.C. Malas, V. Seetharaman: JOM, 1992, vol. 44, pp. 8–1310.1007/BF03222246 ↗
13. J.C. Malas, S. Venugopal, T. Seshacharyulu: Mater Sci. Eng. A, 2004, vol. A368, pp. 41–4710.1016/j.msea.2003.09.078 ↗
14. S. Venugopal, S.L. Mannan, Y.V.R.K. Prasad: Scripta Metall. Mater., 1993, vol. 28, pp. 715–2010.1016/0956-716X(93)90040-Y ↗
15. H. Ziegler: in Progress in Solid Mechanics vol. IV, I.N. Sneddon, R. Hill, eds., North Holland Publishing Co., Amsterdam, 1963, pp. 91–193
16. J.C. Malas: Ph.D. Dissertation, Ohio University, Athens, OH, 1991
17. H.L. Gegel: in Computer Simulation in Materials Science, R.J. Ardenault, J.R. Beeler, D.M. Easterling, eds., ASM, Metals Park, OH, 1987, pp. 291–344
18. Y.V.R.K. Prassad, S. Sasidhara, H.L. Gegel, J.C. Malas: Hot Working Guide: A Compendium of Processing Maps, ASM INTERNATIONAL, Metals Park, OH, 1997, pp. 1–545
19. R. Teti: CIRP Annals – Manufacturing Technology, 2002, vol. 51, pp. 611–3410.1016/S0007-8506(07)61703-X ↗
20. K. Nakayama: Bulletin of Faculty of Engineering vol. 8, Yokohama National University, Yohohama, Japan, 1959, pp. 1–26
21. W. Pentland, C.L. Mehl, J.L. Wennberg, Col. P.L. Hill, M.A. Guenther, and R.T. Krueck: “American Machinist/Metal Working Manufacturing,” McGraw Hill Inc., New York, Special Report No. 492, July 11, 1960, pp. 117–30
22. M.E. Merchant: J. Appl. Phys., 1945, vol. 16, pp. 318–2410.1063/1.1707596 ↗
23. E.L. Gallab and M. Sklab: J. Mater. Process. Technol., 2000, vol. 101, pp. 10–20; 1998, vol. 83, pp. 151–58 and pp. 277–8510.1016/S0924-0136(98)00072-7 ↗
24. S.S. Joshi, N. Ramakrishnan, D. Sarathy, and P. Ramakrishnan: Proc. 1st World Conf. on Integrated Design and Process Technology, Austin, TX, 1995, IDPT-vol. 1, pp. 492–97
25. B.-C. Ko, G.-S Park, Y.-C. Yoo: J. Mater. Processing Technol., 1999, vol. 95, pp. 210–1510.1016/S0924-0136(99)00292-7 ↗
26. M. Sklad: J. Mater. Process. Technol., 1998, vol. 83, pp. 277–8510.1016/S0924-0136(98)00072-7 ↗
27. K.G. Scheckel, D.L. Sparks: Soil Sci. Soc. Am. J., 2001, vol. 65, pp. 719–2810.2136/sssaj2001.653719x ↗
28. N. Kanetake, H. Ohira: J. Mater. Process. Technol., 1990, vol. 24, pp. 281–8910.1016/0924-0136(90)90189-2 ↗
29. E. Morin, J. Masounave, E.E. Laufer: Wear, 1995, vol. 184, pp. 11–1610.1016/0043-1648(94)06541-1 ↗
30. L. Fang, Q.D. Zhou, Y.J. Li: Wear, 1991, vol. 151, pp. 313–2110.1016/0043-1648(91)90258-V ↗
31. X. Li, W.K.H. Seah: Wear, 2001, vol. 247, pp. 161–7110.1016/S0043-1648(00)00524-X ↗
32. L. Fang, Q.D. Zhou, Y.J. Li: Wear, 1991, vol. 151, pp. 313–2110.1016/0043-1648(91)90258-V ↗
33. G. Yanming, Z. Zehua: J. Mater. Process. Technol., 2000, vol. 100, pp. 194–9910.1016/S0924-0136(99)00405-7 ↗
34. K. Nakayama, K. Iguchi: J. Jpn. Soc. Precis. Eng., 1957, vol. 22, pp. 104–1010.2493/jjspe1933.22.104 ↗