journal article·2015-01Open access

Development of a Press-Hardened Steel Suitable for Thin Slab Direct Rolling Processing

Jewoong Lee, Bruno C. De Cooman

Abstract

The thin slab casting and direct rolling process is a hot-rolled strip production method which has maintained commercial quality steel grades as a major material in many industrial applications due to its low processing cost. Few innovative products have however been developed specifically for production by thin slab direct rolling. Press hardening or hot press forming steel grades which are now widely used to produce structural automotive steel parts requiring ultra-high strength and formability may however offer an opportunity for thin slab direct rolling-specific ultra-high strength products. In this work, a newly designed press hardening steel grade developed specifically for thin slab direct rolling processing is presented. The press hardening steel has a high nitrogen content compared with press hardening steel grades produced by conventional steelmaking routes. Boron and titanium which are key alloying additions in conventional press hardening steel such as the 22MnB5 press hardening steel grade are not utilized. Cr is added in the press hardening steel to obtain the required hardenability. The properties of the new thin slab direct rolling-specific 22MnCrN5 press hardening steel grade are reviewed. The evolution of the microstructure and mechanical properties with increasing amounts of Cr additions from 0.6 to 1.4 wt pct and the effect of the cooling rate during die-quenching were studied by means of laboratory simulations. The selection of the optimum chemical composition range for the thin slab direct rolling-specific 22MnCrN5 steel in press hardening heat treatment conditions is discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. J.M. Rodriguez-Ibabe: Thin Slab Direct Rolling of Microalloyed Steels, 1st ed., Trans Tech Publications, Zurich, 2007.
2. M. Hara, H. Kikuchi, M. Hanao, M. Kawamoto, T. Murakami, and T. Watanabe: Rev. Metall., 2002, vol. 99, p. 367.10.1051/metal:2002127 ↗
3. C. Yos: Commercialization of New Manufacturing Processes for Materials, 1998, vol. 57, p. 48.
4. J.M. Rodriguez-Ibabe, Mater. Sci. Forum. 500–501 (2005) 49.10.4028/www.scientific.net/MSF.500-501.49 ↗
5. M. Millet: Thinner Slab Casting, 33rd McMaster Symposium, 2005, vol. 1, p. 262.
6. N. Zapuskalo, ISIJ Int. 43 (2003) 1115.10.2355/isijinternational.43.1115 ↗
7. G. Berglund, K. Kallstrom, and L. Melin: 11th International Deep-Drawing Research Group Congress, (C/43/80), 1980, p. 635.
8. M. Jonsson: “Products in Hot Stamped Boron Steel”, Great Designs in STEEL Seminar, 2006.
9. B. Macek: “Optimization Side Crash Performance Using a Hot-Stamped B-Pillar”, Great Designs in STEEL Seminar, 2006.
10. J. Lechler, M. Merklein, M. Geiger, Steel Res. Int. 79 (2009) 98–104.10.1002/srin.200806323 ↗
11. M. Naderi, L. Durrenberger, A. Molinari, W. Bleck, Mater. Sci. Eng. A: 478 (2008) 130–39.10.1016/j.msea.2007.05.094 ↗
12. M. C. Somani, L. P. Karjalainen, M. Eriksson and M. Oldenburg, ISIJ Int. 41 (2001) 361–67.10.2355/isijinternational.41.361 ↗
13. T. Asai: “Hot Stamping Drawability of Steel”, IDDRG 2004, Sindelfingen, Germany, 2004.
14. D. Berglund, Hot Stamped Components with Tailored Properties, 1st International Conference on Hot Sheet Metal Forming of High-Performance Steel, Lulea, Sweden, 2009.
15. G. Berglund: The History of Hardening of Boron Steel in Northern Sweden, 2nd International Conference on Hot Sheet Metal Forming of High-Performance Steel, Lulea, Sweden, 2008.
16. J.M. Rodriguez-Ibabe, Mater. Sci. Forum. 49 (2005) 500–501.
17. F. Steela, P. Bobig, A. Carboni, and I. Faruk: Intern. Symp. Thin Slab Rolling, 2002, p. 49.
18. M. Merklein, J. Lechler, M. Geiger. CIRP Ann. 55 (2006) 229–32.10.1016/S0007-8506(07)60404-1 ↗
19. Kolleck, R., Pfanner, S. and Warnke, E. P, Key Eng. Mater. 344 (2007) 225–32.10.4028/www.scientific.net/KEM.344.225 ↗
20. H. Karbasian, A.E. Tekkaya, J. Mater. Process. Technol. 210 (2010) 2103–18.10.1016/j.jmatprotec.2010.07.019 ↗
21. J. S. Kirkaldy and D. Venugopalan, Phase Transformation in Ferrous Alloys, TMS, Warrendale, PA, (1984) 125.
22. B. C. De Cooman, J. G. Speer, Fundamentals of Steel Product Physical Metallurgy, 3rd ed. AIST, Warrendale, PA, (2012).
23. C. Zener, quoted by C.S. Smith: Trans. AIME., 1948, vol. 175, pp. 15–51.
24. P. Payson and H. Savage, Trans ASM. 33 (1944) 261–80.
25. K.W. Andrews, JISI, 203 (1965) 721–27.