Effect of Proximity and Dimension of Two Artificial Pitting Holes on the Fatigue Endurance of Aluminum Alloy AISI 6061-T6 Under Rotating Bending Fatigue Tests
Source abstract
Abstract
This work deals with the study of the two artificial pitting holes effects, caused by their dimensions and proximity, on the fatigue endurance of aluminum alloy AISI 6061-T6 under rotating bending fatigue tests. Stress concentration induced by artificial pitting holes is analyzed and correlated with the experimental fatigue life. It is found that the stress concentration increases exponentially when the two pitting holes approach, and this induces an important reduction in the fatigue life. Concerning the diameter variation of one pitting in regard to the second, no important influence was observed on fatigue life for a given separation between them; this implies that the separation between the two artificial pitting holes and the associated stress concentration is the principal parameter on the fatigue life under these conditions. Finally, results are discussed and conclusions are presented involving the fatigue life, proximity, and dimension of pitting holes, stress concentration factor, and fracture surfaces where the failure origin is identified.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Advanced Welding Techniques Analysis · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. C.K. Toh and S. Kanno: J. Mater. Sci., 2004, vol. 39 (10), pp. 3497–3500.10.1023/B:JMSC.0000026960.19123.0c ↗
2. S.J. Pawel and E.T. Manneschmidt: J. Nucl. Mater., 2003, vol. 318, pp. 355–64.10.1016/S0022-3115(03)00022-9 ↗
3. J.R. Davis, ed.: Aluminum and Aluminum Alloys, ASM Specialty Handbook, ASM International, 1994.
4. P. Traverso, R. Spiniello, and L. Monaco: Surf. Interface Anal., 2002, vol. 34 (1), pp. 185–88.10.1002/sia.1279 ↗
5. R. Braun, U. Alfaro Mercado, and G. Biallas: Mater. Sci. Forum, 2006, vol. Aluminium Alloys 2006-ICAA10, pp. 1113–18.10.4028/www.scientific.net/MSF.519-521.1113 ↗
6. W.L. Xu, T.M. Yue, H.C. Man, and C.P. Chan: Surf. Coat. Technol., 2006, vol. 200, pp. 5077–86.10.1016/j.surfcoat.2005.05.034 ↗
7. S. Ishihara, Z.Y. Nan, A.J. McEvily, T. Goshima, and S. Sunada: Int. J. Fatigue, 2008, vol. 30, pp. 1659–68.10.1016/j.ijfatigue.2007.11.004 ↗
8. D.L. DuQuesnay, P.R. Underhill, and H.J. Britt: Int. J. Fatigue, 2003, vol. 25, pp. 371–77.10.1016/S0142-1123(02)00168-8 ↗
9. H. Allachi, F. Chaouket, and K. Draoui: J. Alloys Compd., 2010, vol. 491, pp. 223–29.10.1016/j.jallcom.2009.11.042 ↗
10. G.M. Domínguez Almaraz, V.H. Mercado Lemus, and J.J. Villalón López: Procedia Eng., 2010, vol. 2, pp. 805–13.10.1016/j.proeng.2010.03.087 ↗
11. M. Cerit, K. Genel, and S. Eksi: Eng. Failure Analysis, 2009, vol. 16, pp. 2467–72.10.1016/j.engfailanal.2009.04.004 ↗
12. W.D. Pilkey and D.F. Pilkey: Peterson’s Stress Concentrations Factors, 3rd ed., John Wiley & Sons, New York, NY, 2007.10.1002/9780470211106 ↗
13. P.C Paris, T. Palin-Luc, H. Tada, and N. Santier: Crack Paths 2009, International Conference on CRACK PATHS (CP 2009), Proceedings, Vicenza, Italy, Sept. 23–25, 2009, pp. 495–502.
14. S.I. Rokhlin, J.-Y. Kim, H. Nagy, and B. Zoofan: Eng. Fract. Mech.,1999, vol. 62, pp. 425–44.10.1016/S0013-7944(98)00101-5 ↗
15. R. Pérez Mora, G. Domínguez Almaraz, T. Palin-Luc, C. Bathias, and J.L. Arana (2010) Key Eng. Mater., 449: 104–13.10.4028/www.scientific.net/KEM.449.104 ↗
16. M.R. Bayoumi, A.A. Ismail, and A.K. Abd El Latif (1996) Eng. Fract. Mech. 53: 141–51.10.1016/0013-7944(95)00073-5 ↗
17. K. Sun: SPE Product. Facil., 2005, vol. 20, pp. 334–39.10.2118/90094-PA ↗
18. G.S. Chen, K.-C. Wan, M. Gao, R.P. Wei, and T.H. Flournoy: Mater. Sci. Eng. A, 1996, vol. 219, pp. 126–32.10.1016/S0921-5093(96)10414-7 ↗