journal article·2014-02

Alloying-Element Loss During High-Temperature Processing of a Nickel-Base Superalloy

S. L. Semiatin, J. M. Shank, W. M. Saurber, A. L. Pilchak, D. L. Ballard, F. Zhang, B. Gleeson

Publisher page

Abstract

The effect of exposure at temperatures commonly used for wrought processing/heat treatment of nickel-base superalloys on the loss of alloying elements at the free surface has been determined. For this purpose, LSHR superalloy samples were exposed at 1408 K (1135 °C) for 0.25 to 4 hours in a vacuum or air furnace. Samples heat treated in the air furnace were either bare or enclosed in quartz capsules that had been evacuated or backfilled with argon. Following heat treatment, the alloy composition as a function of depth below the surface was determined by wavelength dispersive spectroscopy. Samples that had been heat treated in the vacuum furnace exhibited significant depletion of only chromium, a behavior explained on the basis of its high activity in nickel solid solution and corresponding rapid rate of evaporation. By contrast, samples heat treated in air exhibited an irregular scale at the surface and an underlying grain-coarsened, gamma-prime-depleted metal layer lean in aluminum, titanium, and chromium. A yet different behavior characterized primarily by aluminum loss at the surface was noted for samples that had been heat treated in evacuated or argon-backfilled capsules. These observations were interpreted in the context of a reaction between the quartz capsule and the aluminum evaporant.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · High-Temperature Coating Behaviors · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. S.L. Semiatin, M.E. Gross, D.W. Matson, W.D. Bennett, C.C. Bonham, A.I. Ustinov, and D.L. Ballard: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 4819–34.10.1007/s11661-012-1255-9 ↗
2. A.L. Pilchak, D.L. Ballard, D.S. Weaver, and S.L. Semiatin: Metall. Mater. Trans. A, vol. 42A, 2011, pp. 1089-102.10.1007/s11661-010-0508-8 ↗
3. D.L. Ballard, D.S. Weaver, A.L. Pilchak, and S.L. Semiatin: J. Eur. Ceram. Soc., 2010, vol. 30, pp. 2305-312.10.1016/j.jeurceramsoc.2010.03.015 ↗
4. J.J. Moverare and S. Johansson: Mater. Sci. Eng. A, 2010, vol. A527, pp. 553-58.10.1016/j.msea.2009.08.023 ↗
5. S.L. Semiatin, K.E. McClary, A.D. Rollett, C.G. Roberts, E.J. Payton, F. Zhang, and T.P. Gabb: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 1649-61.10.1007/s11661-011-1035-y ↗
6. S.L. Semiatin, K.E. McClary, A.D. Rollett, C.G. Roberts, E.J. Payton, F. Zhang, and T.P. Gabb: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 2778–98.10.1007/s11661-013-1675-1 ↗
7. J. Li, S.L. Johns, B.M. Iliescu, H.J. Frost, and I. Baker: Acta Mater., 2002, vol. 50, pp. 4491-97.10.1016/S1359-6454(02)00265-3 ↗
8. D.Y. Young and B. Gleeson: Corrosion Sci., 2002, vol. 44, pp. 345-57.10.1016/S0010-938X(01)00065-8 ↗
9. I. Langmuir: Phys. Rev., 1913, vol. 5, pp. 329-42.10.1103/PhysRev.2.329 ↗
10. H.S. Carslaw and J.C. Jaeger: Conduction of Heat in Solids, Oxford University Press, London, 1959.
11. M.S.A. Karunaratne, D.C. Cix, P. Carter, and R.C. Reed: Superalloys 2000, T.M. Pollock, R.D. Kissinger, R.R. Bowman, K.A. Green, M. McLean, S. Olson, and J.J. Schirra, eds., TMS, Warrendale, PA, 2000, pp. 263–72.
12. D.D. Pruthi, M.S. Anand, and R.P. Agarwala: J. Nucl. Mater., 1977, vol. 64, pp. 206-210.10.1016/0022-3115(77)90026-5 ↗
13. R. Speiser, H.L. Johnston, and P. Blackburn: J. Am. Chem. Soc., 1950, vol. 72, pp. 4142-43.10.1021/ja01165a082 ↗
14. D.R. Lide: CRC Handbook of Chemistry and Physics, 84th ed., CRC Press, Boca Raton, FL, 2003, Section 4, Properties of the Elements and Inorganic Compounds; Vapor Pressure of the Metallic Elements.
15. Y. Minamino, S.B. Jung, T. Yamane, K. Hirao: Metall. Trans. A, 1992, vol. 23A, pp. 2783-90.10.1007/BF02651757 ↗
16. Y. Mishin and C. Herzig: Mater. Sci. Eng. A, 1999, vol. A260, pp. 55-71.10.1016/S0921-5093(98)00978-2 ↗
17. R. Dohmen and R. Milke: Rev. Mineral. Geochem., 2010, vol. 72 pp. 921-70.10.2138/rmg.2010.72.21 ↗
18. J.W. Nesbitt and R.W. Heckel: Metall. Trans. A, 1987, vol. 18A, pp. 2061-73.10.1007/BF02647078 ↗
19. M.A. Dayananda: Mater. Sci. Eng. A, 1989, vol. A121, pp. 351-59.10.1016/0921-5093(89)90787-9 ↗
20. D.S. Berry: J. Appl. Phys., 1973, vol. 44, pp. 3792-93.10.1063/1.1662846 ↗
21. B.D. Bastow, D.P. Whittle, and G.C. Wood: Oxid. Met., 1978, vol. 12, pp. 413-38.10.1007/BF00612088 ↗
22. C.A. Stearns, F.J. Kohl, and G.C. Fryburg: J. Electrochem. Soc., 1974, vol. 121, pp. 945-51.10.1149/1.2401958 ↗
23. B. Gleeson: Schreir’s Corrosion, vol. 1, A.J. Richardson, ed., Elsevier, Amsterdam, 2010, pp. 180–94.10.1016/B978-044452787-5.00012-3 ↗
24. P.Y. Hou and J. Stringer: Oxid. Met., 1990, vol. 33, pp. 357-69.10.1007/BF00666805 ↗