Effect of Post-weld Heat Treatment on Microstructure and Mechanical Properties of Laser Beam Welded TiAl-based Alloy
Source abstract
Abstract
Post-weld heat treatment is carried out on the laser beam welded γ-TiAl-based alloy Ti-48Al-1Cr-1.5Nb-1Mn-0.2Si-0.5B (at. pct). The macro/microstructure and mechanical properties of both as-welded and heat-treated specimens are investigated by radiography, SEM, and tensile tests. Moreover, high energy synchrotron X-ray diffraction is performed to measure the residual stresses and evaluate the microstructure evolution. It is found that the residual stresses are distributed in a three-peak shape in the region of the weld zone and heat-affected zone of the as-welded specimen due to the microstructural transformation and heat softening. The residual stresses are largely relieved after the heat treatment. The heat-treated specimens have a near fully lamellar microstructure and show balanced mechanical properties of strength and ductility. The diffraction shows that the phase transformation from α2 to γ takes place under tensile load at 1023 K (750 °C), and the grain size and lamellar spacing are refined in the weld zone. Finally, the fracture mechanisms are found to be controlled by the local stress concentration-induced strain misfit between α2 and γ phases in the near γ grains and delamination and debonding in the lamellae. Boride ribbons of 5 μm in the near fully lamellar microstructure are found not to be detrimental to the tensile properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · MXene and MAX Phase Materials · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. F. Appel, J. D. H. Paul, and M. Oehring: Gamma Titanium Aluminide Alloys Science and Technology, WILEY-VCH, Weinheim, 2011, pp. 1–7.10.1002/9783527636204 ↗
2. Y.W. Kim: JOM, 1994, vol. 46, pp. 30–39.10.1007/BF03220745 ↗
3. M. C. Chaturvedi, Q. Xu, and N. L. Richards: J. Mater. Process. Technol., 2001, vol. 118, pp. 74–78.10.1016/S0924-0136(01)00870-6 ↗
4. H. Clemens and H. Kestler: Adv. Eng. Mater., 2000, vol. 2, pp. 551–70.10.1002/1527-2648(200009)2:9<551::AID-ADEM551>3.0.CO;2-U ↗
5. J. Liu, V. Ventzke, P. Staron, N. Schell, N. Kashaev, and N. Huber: Adv. Eng. Mater., 2012, vol. 14, pp. 923–27.10.1002/adem.201200113 ↗
6. J. Liu, V. Ventzke, P. Staron, H.-G. Brokmeier, M. Oehring, N. Kashaev, and N. Huber: TMS 2012 Supplemental Proceedings, Vol. 1: Materials Processing and Interfaces, Warrendale, 2012, pp. 887–94.10.1002/9781118356074.ch111 ↗
7. G. Chen, B. Zhang, W. Liu, and J. Feng (2011) Intermetallics 19:1857–63.10.1016/j.intermet.2011.07.017 ↗
8. J. Liu, M. Dahmen, V. Ventzke, N. Kashaev, and R. Poprawe (2013) Intermetallics 40:65–70.10.1016/j.intermet.2013.04.007 ↗
9. M. F. Arenas and V. L. Acoff: Scripta Mater., 2002, vol. 46, pp. 241–46.10.1016/S1359-6462(01)01232-5 ↗
10. T. G. Nieh and J. Wadsworth: Int. Mater. Rev., 1999, vol. 44, pp. 59–75.10.1179/095066099101528225 ↗
11. T. G. Nieh, I. M. Hsiung, and J. Wadsworth: Intermetallics, 1998, vol. 7, pp. 163–70.10.1016/S0966-9795(98)00017-X ↗
12. S. H. Goods and T. G. Nieh: Scripta Metall. Mater., 1983, vol. 17, pp. 23–30.10.1016/0036-9748(83)90064-9 ↗
13. C. Zhang and K. Zhang: J. Alloy. Compd., 2010, vol. 492, pp. 236–40.10.1016/j.jallcom.2009.12.028 ↗
14. C. T. Liu, P. J. Maziasz, D. R Clemens, J. H. Schneibel, V. K. Sikka, T. G. Nieh, J. L. Wright, and L. R. Walker (1995) In: Y.-W. Kim, R. Wagner, and M. Yamaguchi (eds.), Gamma Titanium Aluminides. TMS, Warrendale, pp. 679–88.
15. C. T. Liu, J. H. Schneibel, P. J. Maziasz, J. L. Wright, and D. S. Easton: Intermetallics, 1996, vol. 4, pp. 429–40.10.1016/0966-9795(96)00047-7 ↗
16. H. Shiota, K. Tokaji, and Y. Ohta: Mater. Sci. Eng. A, 1998, vol. 243, pp. 169–75.10.1016/S0921-5093(97)00796-X ↗
17. L. Heatherly, Jr., E. P. George, C.T. Liu, and M. Yamaguchi (1997) Intermetallics 5:281–88.10.1016/S0966-9795(96)00089-1 ↗
18. S.W. Kim, K.S. Kumar, M. H. Oh, and D. M. Wee: Intermetallics, 2007, vol. 15, pp. 976–84.10.1016/j.intermet.2006.12.004 ↗
19. S. Yokoshima and M. Yamaguchi: Acta Mater., 1996, vol. 44, pp. 873–83.10.1016/1359-6454(95)00255-3 ↗
20. K. S. Chan, J. Onstoot, and K. S. Kumar: Metall. Mater. Trans A, 2000, vol. 31A, pp. 71–80.10.1007/s11661-000-0054-x ↗
21. Y. Chen, H. Niu, F. Kong, and S. Xiao: Intermetallics, 2011, vol. 19, pp. 1405–10.10.1016/j.intermet.2011.05.006 ↗
22. D. Hu: Intermetallics, 2002, vol. 10, pp. 851–58.10.1016/S0966-9795(02)00087-0 ↗
23. D. Hu, H. Jiang, and X. Wu: Intermetallics, 2009, vol. 17, pp. 744–48.10.1016/j.intermet.2009.03.002 ↗
24. K.-D. Liss, A. Bartels, A. Schreyer, and H. Clemens: Textures and Microstructures, 2003, vol. 35, pp. 219–52.10.1080/07303300310001634952 ↗
25. D. Hu, J.F. Mei, M. Wickins, and R.A. Harding: Scripta Mater., 2002, vol. 47, pp. 273–78.10.1016/S1359-6462(02)00140-9 ↗
26. U. Hecht, V. Witusiewicz, A. Drevermann, and J. Zollinger: Intermetallics, 2008, vol. 16, pp. 969–78.10.1016/j.intermet.2008.04.019 ↗
27. R. J. Simpkins, M. P. Rourke, T. R. Bieler, and P. A. McQuay: Mater. Sci. Eng. A, 2007, vol. 463, pp. 208–15.10.1016/j.msea.2006.09.114 ↗
28. K.-D. Liss, A. Stark, A. Bartels. H. Clemens, T. Buslaps, D. Phelan, and A. A. Yeoh: Adv. Eng. Mater., 2008, vol. 10, pp. 389–92.10.1002/adem.200700322 ↗
29. M. Karadge, Y.-W. Kim, and P. I. Gouma: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2129–38.10.1007/s11661-003-0277-8 ↗
30. P.-I. Gouma, K. Subramanian, Y.-W. Kim, and M. J. Mills: Intermetallics, 1998, vol. 6, pp. 689–93.10.1016/S0966-9795(98)00030-2 ↗
31. N.Z. Niu, F.T. Kong, Y.Y. Chen, and C.J. Zhang: J. Alloy. Compd., 2012, vol. 543, pp. 19–25.10.1016/j.jallcom.2012.07.127 ↗
32. J. H. Kim, T. K. HA, Y. W. Chang, and C. S. Lee: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2165–76.10.1007/s11661-003-0280-0 ↗
33. K. S. Chan and Y-W. Kim: Acta Metall. Mater., 1995, vol. 43, pp. 439–51.10.1016/0956-7151(94)00278-P ↗
34. K.-D. Liss, A. Bartels, H. Clemens, S. Bystrzanowski, A. Stark, T. Buslaps, F.-P. Schimansky, R. Gerling, C. Scheu, and A. Schreyer: Acta Mater., 2006, vol. 54, pp. 3721–35.10.1016/j.actamat.2006.04.004 ↗
35. K.-D. Liss, and K. Yan: Mater. Sci. Eng. A, 2010, vol. 528, pp. 11–27.10.1016/j.msea.2010.06.017 ↗