Simulation of ferrite growth in continuously cooled low-carbon iron alloys
Source abstract
Abstract
The growth of a planar ferrite (α): austenite (y) boundary in low-carbon iron and Fe-Mn alloys continuously cooled from austenite through the (a + y) two-phase field and the a single-phase field was simulated by incorporating carbon diffusion in austenite, intrinsic boundary mobility, and the drag of an alloying element. At a very high cooling rate (≥ 10 3 °C/s), the width of the carbon diffusion spike in austenite approaches the limit at which spikes are viable, so that the growth of ferrite in which carbon is not partitioned can occur even above the a solvus. In this context, the upper limiting temperature of partitionless growth of ferrite is the T 0 temperature. In the presence of drag of an alloying element, e.g., Mn, both carbon-partitioned and partitionless growth of ferrite begins to occur at finite undercoolings from the Ae 3 , T 0 , or α-solvus temperature, at which the driving force for transformation exceeds the drag force. The intrinsic mobility of the a: γ boundary may play a significant role at an extremely high cooling rate (≥10 5 °C/s).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. W.D. Swanson and J.G. Parr: J. Iron Steel Inst., 1964, vol. 202, pp. 104–07.
2. F.W. Jones and W.I. Pumphrey: J. Iron Steel Inst., 1949, vol. 163, pp. 121–31.
3. T.B. Massalski, A.J. Perkins, and J. Jaklovsky: Metall. Trans., 1972, vol. 3, pp. 687–94.10.1007/BF02642752 ↗
4. T.B. Massalski, J.H. Perepezko, and J. Jaklovsky: Mater. Sci. Eng., 1975, vol. 18, pp. 193–98.10.1016/0025-5416(75)90169-X ↗
5. E.S.K. Menon, M.R. Plichta, and H.I. Aaronson: Acta Metall., 1988, vol. 36, pp. 321–32.10.1016/0001-6160(88)90009-0 ↗
6. M. Hillert: Metall. Mater. Trans. A, 1984, vol. 15A, pp. 411–19.10.1007/BF02644964 ↗
7. E.A. Wilson: Iron Steel Inst. Jpn., 1994, vol. 34, pp. 615–30.10.2355/isijinternational.34.615 ↗
8. G.P. Krielaart, J. Sietsma, and S. van der Zwaag: Mater. Sci. Eng., 1998, vol. A238, pp. 104–16.10.1016/S0921-5093(97)00752-1 ↗
9. T.A. Kop, Y. van Leeuwen, J. Sietsma, and S. van der Zwaag: Iron Steel Inst. Jpn. Int., 2000, vol. 40, pp. 713–18.10.2355/isijinternational.40.713 ↗
10. M. Suehiro, Z.-K. Liu, and J. Ågren: Acta Mater., 1996, vol. 44, pp. 4241–51.10.1016/S1359-6454(96)00036-5 ↗
11. M. Enomoto: Acta Mater., 1999, vol. 47, pp. 3533–40.10.1016/S1359-6454(99)00232-3 ↗
12. G.R. Purdy, W.T. Reynolds, Jr., and H.I. Aaronson: Proc. Int. Conf. on Solid → Solid Phase Transformations (PTM ’99), M. Koiwa, K. Ohtsuka, and T. Miyazaki, eds., Japan Institute of Metals, Kyoto, 1999, pp. 1461–64.
13. M. Hillert: Acta Mater., 1999, vol. 47, pp. 4481–505.10.1016/S1359-6454(99)00336-5 ↗
14. M. Hillert and M. Schalin: Acta Mater., 2000, vol. 48, pp. 461–68.10.1016/S1359-6454(99)00361-4 ↗
15. K. Oi, C. Lux, and G.R. Purdy: Acta Mater., 2000, vol. 48 pp. 2147–55.10.1016/S1359-6454(00)00041-0 ↗
16. E.S.K. Menon, M.R. Plichta, and H.I. Aaronson: Scripta Metall., 1983, vol. 17, pp. 1455–57.10.1016/0036-9748(83)90375-7 ↗
17. M. Enomoto and N. Nojiri: Scripta Mater., 1997, vol. 36, pp. 625–32.10.1016/S1359-6462(96)00432-0 ↗
18. I.I. Kolodner: Comm. Pure Appl. Math., 1956, vol. 6, pp. 1–31.10.1002/cpa.3160090102 ↗
19. M. Enomoto and C. Atkinson: Acta Metall. Mater., 1993, vol. 41, pp. 3237–44.10.1016/0956-7151(93)90053-U ↗
20. M. Hillert: Metall. Trans. A, 1975, vol. 6A, pp. 5–19.10.1007/BF02673664 ↗
21. M. Enomoto, T. Sonoyama, and H. Yada: Mater. Trans., JIM, 1998, vol. 39, pp. 189–95.10.2320/matertrans1989.39.189 ↗
22. M. Enomoto, M. Kagayama, N. Maruyama, and T. Tarui: Proc. Int. Conf. on Solid → Solid Phase Transformations (PTM ’99), Kyoto, 1999, M. Koiwa, K. Ohtsuka, and T. Miyazaki eds., Japan Institute of Metals, Kyoto, 1989, pp. 1453–60.
23. J.W. Cahn: Acta Metall., 1962, vol. 10, pp. 789–98.10.1016/0001-6160(62)90092-5 ↗
24. M. Hillert, J. Odqvist, and J. Ågren: Scripta Mater., 2001, vol. 45, pp. 221–27.10.1016/S1359-6462(01)01022-3 ↗
25. L. Kaufman, S.V. Radcliffe, and M. Cohen: in Decomposition of Austenite by Diffusional Processes, V.F. Zackay and H.I. Aaronson, eds., Interscience Publishers, New York, NY, 1962, pp. 313–52.
26. M. Enomoto and H.I. Aaronson: CALPHAD, 1985, vol. 9, pp. 43–58.10.1016/0364-5916(85)90030-6 ↗
27. B. Uhrenius: in Hardenability Concepts with Applications to Steel, D.V. Doane and J.S. Kirkaldy, eds., TMS-AIME, Warrendale, PA, 1978, pp. 28–81.
28. G.P. Krielaart, J. Sietsma, and S. van der Zwaag: Mater. Sci. Eng., 1997, vol. A237, pp. 216–23.10.1016/S0921-5093(97)00365-1 ↗
29. A. Borgenstam and M. Hillert: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1499–510.
30. J. Friedberg, L.-E. Torndahl, and M. Hillert: Jernkont. Ann., 1969, vol. 153, pp. 263–76.