Structure and stability of a new ternary hexagonal phase in Al3 Ti-based Al-Ti-V alloys
Source abstract
Abstract
A novel hexagonal phase (designated H(2)) has been detected as a major constituent of both Al62Ti10V28 and Al55Ti10V35 alloys, following chill casting and after homogenization at 1523 K. The phase H2 has an ordered hexagonal crystal structure (space group P63/mmc, α=0.558±0.001 and c=0.450±0.001 nm), similar to that of α2-Ti3Al, and an atomic composition of 54±1 Al−11±1 Ti−35±1 V in the chill-cast Al55Ti10V35 alloy. A fine-scale, duplex lamellar structure, developed within the ordered H2 phase in the solid state, was composed of parallel-sided multivariants of ξ-Ti5Al11 phase, formed parallel to (0001)H2. The orientation relationship between constituent phases was of the form $$ \left( {111} \right)_\xi ||\left( {0001} \right)H_2 and \left\langle {110} \right\rangle _\xi ||\left[ {11\bar 20} \right]H_2 $$ Following homogenization (1 hour at 1523 K) and isothermal heat treatment at temperatures in the range from 1073 to 1273 K, the Al62Ti10V28 and Al55Ti10V35 alloys were observed to develop two-phase microstructures comprising β-(Ti, V)/δ-Al3(Ti,V) and β/ξ-Ti5Al11, respectively. In both alloys, the β phase could be retained as a stable phase to room temperature, regardless of cooling rate, whereas the H2 phase was unstable at temperatures below ∼1273 K and was consumed by the formation of ξ phase at lower temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Metallurgical and Alloy Processes · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. M. Yamaguchi, Y. Umakoshi, and T. Yamane: Phil. Mag. A, 1987, vol. 55, pp. 301–15.10.1080/01418618708209869 ↗
2. K.S. Kumar: in Structural Intermetallics, R. Darolia, J.J. Lewandowski, C.T. Liu., P.L. Martin, D.B. Miracl, and M.V. Nathal, eds., TMS, Warrendale, PA, 1993, pp. 87–96.
3. B.C. Jordan and P. Duwez: Trans. Am. Soc. Met., 1956, vol. 48, p. 783.
4. P.A. Farrar and H. Margolin: Trans. AIME, 1961, vol. 221, pp. 1214–20.
5. E.S. Bumps and H.D. Kessler: Trans. AIME, 1952, vol. 194, pp. 609–14.
6. E. Ence and H. Margolin: Trans. AIME, 1961, vol. 221, pp. 151–57.
7. T. Tsujimoto: Trans. JIM, 1969, vol. 10, pp. 281–86.10.2320/matertrans1960.10.281 ↗
8. I.I. Kornilov and M.A. Volkova: Izv. Akad. Nauk SSSR Met., 1968, No. 1, p. 176.
9. A. Raman: Z. Metallkd., 1966, vol. 57, pp. 535–40.
10. M.A. Volkova and I.I. Kornilov: Izv. Akad. Nauk SSSR Met., 1970, vol. 5, p. 202.
11. K. Hashimoto, H. Doi, and T. Tsujimoto: J. Jap. Inst. Met., 1985, vol. 49, pp. 410–16.10.2320/jinstmet1952.49.6_410 ↗
12. T. Ahmed and H.M. Flower: Mater. Sci. Eng., 1992, vol. A152, pp. 31–36.10.1016/0921-5093(92)90042-Y ↗
13. M. Paruchuri and T.B. Massalski: in High Temperature Ordered Intermetallic Alloys IV, Materials Research Society Symposia Proceedings, L.A. Johnson, D.P. Pope, and J.O. Stiegler, eds., Materials Research Society, Pittsburgh, PA, 1991, vol. 213, pp. 143–49.
14. F.H. Hayes: in Ternary Alloys—A Comprehensive Compendium of Evaluated Constitutional Data and Phase Diagrams, G. Petzow and G. Effenberg, eds., VCH, New York, NY, 1993, vol. 8, pp. 426–45.
15. W.-S. Chang and B.C. Muddle: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 927–38.10.1007/s11661-997-0223-2 ↗
16. W.-S. Chang and B.C. Muddle: Mater. Sci. Eng., 1995, vols. A192–A193, pp. 233–39.10.1016/0921-5093(94)03254-8 ↗
17. P. Villars and L.D. Calvert: Pearson’s Handbook of Crystallographic Data for Intermetallic Phases, ASM, Metals Park, OH, 1991, vol. 1, p. 551.
18. M.J. Blackburn: in The Science, Technology and Application of Titanium, R.I. Jaffee and N.E. Promisel, eds., Pergamon Press, Oxford, United Kingdom, 1970, pp. 633–43.10.1016/B978-0-08-006564-9.50071-3 ↗
19. G. Cliff and G.W. Lorimer: Proc. 5th Eur. Congr. on Electron Microscopy: Electron Microscopy, The Institute of Physics, London, 1972, p. 140.
20. J.I. Goldstein: in Introduction to Analytical Electron Microscopy, J. Hren, J.J. Goldstein, and D.C. Joy, eds., Plenum Press, New York, NY, 1979, p. 83.10.1007/978-1-4757-5581-7_3 ↗
21. B.F. Buxton, J.A. Eades, J.W. Steeds, and G.M. Rackham: Phil. Trans. R. Soc., 1976, vol. 281, pp. 171–94.
22. International Tables for Crystallography, A.T. Hahn, ed., Kluwer Academic Publishers, Dordrecht, The Netherlands, 1989, pp. 590–91.
23. S. Ogawa: in Order-Disorder Transformations in Alloys, H. Warlimont, ed., Springer-Verlag, Berlin, 1974, pp. 241–64.
24. A. Loiseau, G. Van Tendeloo, R. Portier, and F. Ducastelle: J. Phys., 1985, vol. 46, pp. 595–613.10.1051/jphys:01985004604059500 ↗
25. W.-S. Chang: Ph.D. Thesis, Monash University, Clayton, Victoria, Australia, 1995.
26. E.A. Brandes: Smithells Metals Reference Book, 6th ed., Buttherworth and Co., London, 1983, pp. 4–26.
27. J.L. Murray: Bull. Alloy Phase Diagrams, 1989, vol. 10, pp. 351–57.10.1007/BF02877591 ↗
28. S.M. Sastry and H.A. Lipsitt: Metall. Trans. A., 1977, vol. 8A, pp. 1543–52.10.1007/BF02644857 ↗
29. S.A. Jones, R.D. Shull, A.J. AcAlister, and M.J. Kaufman: Scripta Metall., 1988, vol. 22, pp. 1235–40.10.1016/S0036-9748(88)80138-8 ↗
30. J.M. Howe, U. Dahmen, and R. Gronsky: Phil. Mag., 1987, vol. 56, pp. 31–61.10.1080/01418618708204465 ↗
31. J.W. Christian: Proc. R. Soc. A, 1951, vol. 206, p. 51.
32. B.C. Muddle, J.F. Nie, and G.R. Hugo: Metall. Trans. A, 1994, vol. 25A, pp. 1841–57.10.1007/BF02649032 ↗
33. S.R. Singh and J.M. Howe: Phil. Mag. A, 1992, vol. 66, pp. 739–71.10.1080/01418619208201588 ↗
34. C. McCullough, J.J. Valencia, C.G. Levi, and R. Mehrabian: Acta Metall., 1989, vol. 37, pp. 1321–36.10.1016/0001-6160(89)90162-4 ↗
35. E.W. Collings: in The Physical Metallurgy of Titanium Alloys, ASM, Metals Park, OH, 1984, p. 43.