journal article·2013-02

Comparison in the Oxidation and Corrosion Behavior of Aluminum and Alumina-Reinforced Ni/Ni-Co Alloy Coatings

Meenu Srivastava, J. N. Balaraju, B. Ravisankar, V. K. William Grips

Publisher page

Abstract

In this study, a comparison in the oxidation and corrosion behavior of Ni/Ni-Co aluminum and alumina-reinforced electrodeposited composites has been made. The developed coatings were characterized for the morphology, structure, microhardness, oxidation, and corrosion resistance. It was found that the incorporation of Al particles in NiCo matrix is higher (9 wt pct) compared to Ni matrix (1 wt pct). In the case of aluminum oxide particles, about 5 and 7 wt pct had been obtained in Ni and NiCo matrices respectively. The difference in the surface morphology was observed with respect to metallic (Al) and inert ceramic (Al2O3) particle incorporation. X-ray diffraction studies showed the presence of predominant Ni (200) reflection in the coatings. Also, peaks corresponding to Al and Al2O3 particles were present. The Ni/NiCo-Al coatings exhibited higher microhardness values at 1273 K (1000 °C) compared to alumina-reinforced coatings, indicating better thermal stability of the former coatings. The NiAl coating showed one and two orders of magnitude improved oxidation resistance compared to NiCoAl and Ni/NiCo-Al2O3 coatings, respectively. It was observed that the Ni-Al composite coating exhibited poor corrosion resistance in 3.5 pct NaCl solution compared to the other coatings studied.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrodeposition and Electroless Coatings · Corrosion Behavior and Inhibition · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. X. Yang, X. Peng, and F. Wang: Corrosion Sci., 2008, vol. 50, pp. 3227–32.10.1016/j.corsci.2008.08.030 ↗
2. H. Liu and W. Chen: Mater. Corr., 2008, vol. 59, pp. 311–18.10.1002/maco.200804077 ↗
3. D.F. Susan, K. Barmak, and A.R. Marder: Thin Solid Films, 1997, vol. 307, pp. 133–40.10.1016/S0040-6090(98)80004-7 ↗
4. Y. Zhou, X. Peng, and F. Wang: Oxid. Met., 2005, vol. 64, pp. 169–83.10.1007/s11085-005-6557-5 ↗
5. Y.B. Zhou, G.G. Zhao, H.J. Zhang, Y.C. Zhang, and B.Y. Qian: Vacuum, 2009, vol. 83, pp. 1333–39.10.1016/j.vacuum.2009.04.037 ↗
6. D.F. Susan, W.Z. Misiolek, and A.R. Marder: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 379–90.10.1007/s11661-001-0269-5 ↗
7. H. Liu and W. Chen: Surf. Coat. Tech., 2005, vol. 191, pp. 341–50.10.1016/j.surfcoat.2004.03.029 ↗
8. H. Liu and W. Chen: Surf. Coat. Tech., 2008, vol. 202, pp. 4019–27.10.1016/j.surfcoat.2008.02.015 ↗
9. Y. Zhou, X. Peng, and F. Wang: Scripta Mater., 2004, vol. 50, pp.1429–53.10.1016/j.scriptamat.2004.03.014 ↗
10. I. Naploszek-Bilnik, A. Budniok, and E. Lagiewka: J. Alloy. Compd., 2004, vol. 382, pp. 54–60.10.1016/j.jallcom.2004.06.008 ↗
11. I. Naploszek-Bilnik, A. Budniok, B. Losiewicz, L. Pajak, and E. Lagiewka: Thin Solid Films, 2005, vol. 474, pp. 146–53.10.1016/j.tsf.2004.08.175 ↗
12. M. Srivastava, V.E. Selvi, V.K.W. Grips, and K.S. Rajam: Surf. Coat. Tech., 2006, vol. 201, pp. 3051–60.10.1016/j.surfcoat.2006.06.017 ↗
13. M. Srivastava, V.K.W. Grips, and K.S. Rajam: Appl. Surf. Sci., 2007, vol. 253, pp. 3814–24.10.1016/j.apsusc.2006.08.022 ↗
14. Q. Feng, T. Li, H. Teng, X. Zhang, Y. Zhang, C. Liu, and J. Jin: Surf. Coat. Tech., 2008, vol. 202, pp. 4137–44.10.1016/j.surfcoat.2008.03.001 ↗
15. A. Carnot, I. Frateur, S. Zanna, and B. Tribollet: Corrosion Sci., 2003, vol. 45, pp. 2513–24.10.1016/S0010-938X(03)00076-3 ↗
16. D.E. Williams and J. Asher: Corrosion Sci., 1984, vol. 24, pp. 185–96.10.1016/0010-938X(84)90049-0 ↗
17. X. Cui, W. Wei, H. Liu, and W. Chen: Electrochim. Acta, 2008, vol. 54, pp. 415–20.10.1016/j.electacta.2008.07.066 ↗
18. S. Ghanbari and F. Mahboubi: Mater. Des., 2011, vol. 32, pp. 1859–64.10.1016/j.matdes.2010.12.020 ↗
19. B. Bostani, R. Arghavanian, and N. Parvini-Ahmadi: Mater. Corr., 2010, vol. 61, pp. 1–5.
20. V. Kolarik, M. Juez-Lorenzo, M. Anchustegui, and H. Fietzek: Mater. Sci. Forum, 2008, vol. 595–598, pp. 769–77.10.4028/www.scientific.net/MSF.595-598.769 ↗
21. M. Srivastava, V.K.W. Grips, and K.S. Rajam: J. Alloy. Compd., 2009, vol. 269, pp. 362–65.10.1016/j.jallcom.2008.01.120 ↗
22. J.D. Mathew and J.D. Stephen: Superalloys: A Technical Guide, 2nd ed., ASM International, Materials Park, OH, 2002.
23. R. Bazzard and P.J. Boden: Trans. Inst. Met. Finish., 1972, vol. 50, pp. 63–69.10.1080/00202967.1972.11870221 ↗
24. Y. Itoh and M. Saitoh: J. Eng. Gas Turb. Power, 2005, vol. 127, pp..807–13.10.1115/1.1688766 ↗
25. N. Birks, G.H. Meir, and F.S. Petit: Introduction to High Temperature Oxidation of Metals, 2nd ed., Cambridge Press, New York, NY, 2006, p. 129.10.1017/CBO9781139163903 ↗
26. L. Hu, D. Hovis, and A.H. Heuer: Scripta Mater., 2009, vol. 61, pp. 157–60.10.1016/j.scriptamat.2009.03.023 ↗
27. O. Ozdemir, S. Zeytin, and C. Bindal: Vacuum, 2009, vol. 84, pp. 430–37.10.1016/j.vacuum.2009.09.006 ↗
28. M. Stern and A.L. Geary: J. Electrochem. Soc., 1957, vol. 104, pp. 56–63.10.1149/1.2428496 ↗
29. J.R. Macdonald: Impedance Spectroscopy-Emphasizing Solid Materials and System, Wiley, New York, NY, 1987, p. 88.