journal article·2014-01

Microstructure–Wear Resistance Correlation and Wear Mechanisms of Spark Plasma Sintered Cu-Pb Nanocomposites

Amit Siddharth Sharma, Krishanu Biswas, Bikramjit Basu

Publisher page

Abstract

The dispersion of a softer phase in a metallic matrix reduces the coefficient of friction (COF), often at the expense of an increased wear rate at the tribological contact. To address this issue, unlubricated fretting wear tests were performed on spark plasma sintered Cu-Pb nanocomposites against bearing steel. The sintering temperature and the Pb content as well as the fretting parameters were judiciously selected and varied to investigate the role of microstructure (grain size, second-phase content) on the wear resistance properties of Cu-Pb nanocomposites. A combination of the lowest wear rate (~1.5 × 10−6 mm3/Nm) and a modest COF (~0.4) was achieved for Cu-15 wt pct Pb nanocomposites. The lower wear rate of Cu-Pb nanocomposites with respect to unreinforced Cu is attributed to high hardness (~2 to 3.5 GPa) of the matrix, Cu2O/Fe2O3-rich oxide layer formation at tribological interface, and exuding of softer Pb particles. The wear properties are discussed in reference to the characteristics of transfer layer on worn surface as well as subsurface damage probed using focused ion beam microscopy. Interestingly, the flash temperature has been found to have insignificant effect on the observed oxidative wear, and alternative mechanisms are proposed. Importantly, the wear resistance properties of the nanocomposites reveal a weak Hall–Petch-like relationship with grain size of nanocrystalline Cu.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. ASM Handbook: Friction, Wear and Lubrication Technology, vol. 18, ASM, Materials Park, OH, 1992.
2. B. Bhushan: Principles and Applications of Tribology, 1st ed., John Wiley and Sons, US, 1999.
3. W.A. Glaeser: J. Metals, 1983, vol. 35, pp. 50–55.
4. B. Basu and M. Kalin: Tribology of Ceramics and Composites: Materials Science Perspective, 1st ed., John Wiley Publications, US, 2011.10.1002/9781118021668 ↗
5. A.S. Sharma, K. Biswas, B. Basu and D. Chakravarty: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 2072–2084.10.1007/s11661-010-0589-4 ↗
6. G.C. Pratt: Int. Metall. Rev., 1973, vol. 18, pp. 62–88.10.1179/095066073790137287 ↗
7. F.P. Bowden and D. Tabor: J. Appl. Phys., 1943, vol. 14, pp. 141–151.10.1063/1.1714966 ↗
8. V.E. Buchanan, P.A. Molian, T.S. Sudershan and A. Akers: Wear, 1991, vol. 146, pp. 241–256.10.1016/0043-1648(91)90066-4 ↗
9. P.A. Molian, V.E. Buchanan, T.S. Sudershan and A. Akers: Wear, 1991, vol. 146, pp. 257–267.10.1016/0043-1648(91)90067-5 ↗
10. J.P. Pathak and S.N. Tiwari: Wear, 1992, vol. 155, pp. 37–47.10.1016/0043-1648(92)90107-J ↗
11. B.K. Prasad: Wear, 2004, vol. 257, pp. 110–123.10.1016/j.wear.2003.10.021 ↗
12. T. Kimura, K. Shimizu and K. Terada: Wear, 2007, vol. 263, pp. 586–591.10.1016/j.wear.2007.02.012 ↗
13. T.B. Massalski, J.L. Murray, and L.H. Bennett, eds.: Binary Alloy Phase Diagrams, vol. 1, ASM International, OH, 1986, pp. 944–47.
14. Y.S. Zhang, Z. Han, K. Wang and K. Lu: Wear, 2006, vol. 260, pp. 942–948.10.1016/j.wear.2005.06.010 ↗
15. Y.S. Zhang, K. Wang, Z. Han and G. Liu: Wear, 2007, vol. 262, pp. 1463–1470.10.1016/j.wear.2007.01.012 ↗
16. T.S. Srivatsan, B.G. Ravi, A.S. Naruka, L. Riester, S. Yoo and T.S. Sudarshan: Mater. Sci. Eng. A, 2001, vol. 311, pp. 22–27.10.1016/S0921-5093(01)00931-5 ↗
17. A. S. Sharma, K. Biswas and B. Basu: J. Nanoparticle Res., 2013, vol. 15, pp. 1–12.10.1007/s11051-013-1675-5 ↗
18. D.A. Rigney and J.P. Hirth: Wear, 1979, vol. 53, pp. 345–370.10.1016/0043-1648(79)90087-5 ↗
19. P. Heilmann and D.A. Rigney: Wear, 1981, vol. 72, pp. 195–281.10.1016/0043-1648(81)90367-7 ↗
20. Z.A. Munir, U.A. Tamburini and M. Ohyanagi: J. Mater. Sci., 2006, vol. 41, pp. 763–777.10.1007/s10853-006-6555-2 ↗
21. E.O. Hall: Proc. Phys. Soc., 1951, vol. B64, pp. 747–753.10.1088/0370-1301/64/9/303 ↗
22. N.J. Petch: J. Iron and Steel Inst., 1953, vol. 174, pp. 25–28.
23. F.P. Bowden and D. Tabor: The Friction and Lubrication of Solids, Clarendon, Great Britain, 1950.
24. E. Rabinowicz: J. Lubrication Technol., 1975, vol. 97, pp. 217–249.10.1115/1.3452560 ↗
25. Y. Tsuya and R. Takagi: Wear, 1964, vol. 7, pp. 131–143.10.1016/0043-1648(64)90049-3 ↗
26. N.P. Suh: Wear, 1973, vol. 25, pp. 111–124.10.1016/0043-1648(73)90125-7 ↗
27. B.K. Prasad, A.K. Patwardhan and A.H. Yegneswaran: Mater. Sci. Technol., 1996, vol. 12, pp. 427–435.10.1179/026708396790165885 ↗
28. L.H. Chen and D.A. Rigney: Wear, 1985, vol. 105, pp. 47–61.10.1016/0043-1648(85)90005-5 ↗
29. J.A. Williams: Tribol. Inter., 2005, vol. 38, pp. 863–870.10.1016/j.triboint.2005.03.007 ↗
30. E.A. Brandes and G.B. Brook, eds: Smithells Metals Reference Book, 7th ed., Butterworth-Heinemann, Oxford, 1992, pp. 13-1-13-119.
31. F.E. Kennedy Jr., Wear, 1984, vol. 100, pp. 453–476.10.1016/0043-1648(84)90026-7 ↗
32. L. Lu, R. Schwaiger, Z.W. Shan, M. Dao, K. Lu and S. Suresh: Acta Mater., 2005, vol. 53, pp. 2169–2179.10.1016/j.actamat.2005.01.031 ↗
33. Y.S. Zhang, Z. Han and K. Lu: Wear, 2008, vol. 265, pp. 396–401.10.1016/j.wear.2007.11.004 ↗