Interdependence of Distortion and Residual Stress Relaxation of Cold-Rolled Bearing Rings During Heating
Source abstract
Abstract
This article discusses the distortion behavior during heating of bearing rings produced by cold rolling. The residual stress relaxation was characterized intensively and correlated to the distortion behavior. In the initial state, the rings show compressive residual stresses in tangential and axial direction with almost no variations along the circumference. Because of the cold-rolling process, the entire cross section is affected by residual stresses. The rings present a characteristic size change between the soaking temperatures 773 K and 823 K (500 °C and 550 °C), which can be correlated with the macroresidual stress relaxation in the core of the rings. Changes in roundness deviation were found, but the amplitude of oval and triangular shape increases continuously until austenitizing temperature is reached. As the macrostress relaxation is already completed at 873 K (600 °C), another mechanism should be responsible for these distortions. A correlation between amplitude of the oval shape and decrease of full width at half maximum seems to be present. This may indicate that inhomogeneous recrystallization happens along the circumference of the rings. A triangular shape may result from the influence of the loading tool used as rings are positioned on three contact points during the stress relief treatment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Laser and Thermal Forming Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. H.-W. Zoch: Proc. 1st Int. Conf. on Distortion Engineering, H.-W. Zoch and T. Lübben, eds., Bremen, Germany, 2005, pp. 3–10.
2. T. Ericsson: Handbook of Residual Stress and Deformation of Steel, 1st ed., G. Totten, M. Howes, and T. Inoue, eds., ASM, Materials Park, OH, 2002, pp. 151–58.
3. K.-D. Thoben, T. Lübben, B. Clausen, C. Prinz, A. Schulz, R. Rentsch, R. Kusmierz, L. Nowag, H. Surm, F. Frerichs, M. Hunkel, D. Klein, and P. Mayr: Proc. 4th Int. Conf. on Quenching and Control of Distortion, Beijing, China, 2003, pp. 325–31.
4. F. Hoffmann, O. Keßler, T. Lübben, and P. Mayr: HTM, 2002, vol. 57, pp. 213–17.10.1515/htm-2002-570317 ↗
5. B.S. Lement: Distortion in Tools Steels, ASM, Materials Park, OH, 1959.
6. L. de C.F. Canale and G.E. Totten: Int. J. Mater. Prod. Tech., vol. 24, nos. 1–4, pp. 4–52.
7. J. Sölter, L. Nowag, A. Rocha, A. Walter, E. Brinksmeier, and T. Hirsch: HTM, 2004, vol. 59, pp. 169–75.10.3139/105.100286 ↗
8. J. Volkmuth, U. Sjöblom, J. Slycke, and A. Thuvander: 20th ASM Heat Treating Converence Proceedings, St. Louis, MO, 2000, pp. 455–60.
9. J. Epp and T. Hirsch: Exp. Mech., 2010, vol. 50, no. 2, pp. 195-204.10.1007/s11340-009-9231-z ↗
10. H. Surm and F. Hoffmann: Proc. 2nd Int. Conf. on Distortion Engineering, H.-W. Zoch and T. Lübben, eds., Bremen, Germany, 2008, pp. 189–98.
11. H. Surm, O. Kessler, F. Hoffmann, and P. Mayr: Int. J. Mater. Prod. Tech., 2005, vol. 24, pp. 270–81.10.1504/IJMPT.2005.007954 ↗
12. F. Frerichs, T. Lübben, F. Hoffmann, and P. Mayr: HTM, 2004, vol. 59, pp. 176-84.10.3139/105.100287 ↗
13. I.C. Noyan and J.B. Cohen: Residual Stress, Measurement by Diffraction and Interpretation, Springer, New York, NY, 1987.
14. M.G. Moore and W.P. Evans: SAE Transactions, 1958, vol. 66, pp. 340–45.
15. V. Tomala, T. Hirsch, and P. Mayr: Surf. Eng., 1999, vol. 15, no. 1, pp. 59–63.10.1179/026708499322911665 ↗
16. E. Macherauch and V. Hauk: Residual Stresses in Science and Technology, 1st ed., DGM Informationsgesellschaft mbH, Oberursel, Germany, 1987, pp. 695-702.
17. M.J. Manjoine: Proc. 28th Sagamore Army Materials Research Conf., E. Kula and V. Weiss, eds., Lake Placid, NY, 1982, pp. 519–30.
18. D. Löhe and O. Vöhringer: Handbook of Residual Stress and Deformation of Steel, 1st ed., G. Totten, M. Howes, and T. Inoue, eds., ASM, Materials Park, OH, 2002, pp. 54–69.
19. H. Surm, O. Kessler, and F. Hoffmann: Arbeits und Ergebnisbericht, A5 SFB 570, University of Bremen, Germany, 2001–2003.
20. M.R. James: Advances in Surface Treatments, vol. 4, A. Niku-Lari, ed., Pergamon Press, Oxford, UK, pp. 349–65.
21. G. Gottstein: Rekristallisation metallischer Werkstoffe, 1st ed., Deutsche Gesellschaft für Metallkunde, Oberursel, Germany, 1984.