journal article·2012-01

Thermal-Treated Pitches as Binders for TiB2/C Composite Cathodes

Xiao-Jun Lü, Jian Xu, Jie Li, Yan-Qing Lai, Ye-Xiang Liu

Publisher page

Abstract

The effect of thermal treatment on the microstructure and properties of pitches and thermal-treated, pitch-based TiB2/C composite cathodes were investigated. Thermal treatments were performed at 473 K, 523 K, 573 K, 623 K, and 673 K (200 °C, 250 °C, 300 °C, 350 °C, and 400 °C), respectively. The results show that the aromaticity of the treated pitches increases with an increasing thermal treatment temperature, and subsequently, the coking value and quinoline-insoluble (QI) content increase from 60.62 wt pct to 79.09 wt. pct and from 8.97 wt pct to 32.54 wt pct when the treatment temperature increases from 473 K to 623 K (200 °C to 350 °C). The volume fraction of coalesced mesophase in semicoke decreases with an increasing thermal treatment temperature, and after 673 K (400 °C) is reached, the coalesced mesophase is almost invisible. The bulk density and compressive strength of modified pitch-based cathodes increase with an increasing thermal treatment temperature from 2.24 g cm−3 to 2.39 g cm−3 and from 24.21 MPa to 54.85 MPa, whereas open porosity decreases from 34.62 pct to 27.06 pct. Both electrical resistivity and electrolysis expansion ratio first decrease and then increase with an increasing thermal treatment temperature, and the lowest values (45.63 μΩ m and 0.65 pct) are achieved at 573 K (300 °C). Compared with those of the parent pitch-based cathode, the properties of the modified pitch-based cathodes had improved significantly. The mechanisms of the improvements are discussed in the text.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fiber-reinforced polymer composites · Advancements in Battery Materials · Graphene research and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Q.Y. Li, J. Li, J.H. Yang, Y.Q. Lai, H.Q. Wang, and Y.G. Liu: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 2358–61.10.1007/s11661-007-9294-3 ↗
2. Y.X. Liu and J. Li: Modern Aluminum Electrolysis, 1st ed., Metallurgy Industry Publication, Beijing, China, 2008, p. 90.
3. J. Li, X.J. Lü, Q.Y. Lai, and Y.X. Liu: JOM, 2008, vol. 60, pp. 32–37.10.1007/s11837-008-0104-1 ↗
4. M. Dionne, G. Lespérance, and A. Mirchi: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2649-56.10.1007/s11661-001-0055-4 ↗
5. M.A. Coulombe, L. Martin, C. Patrice, B. Allard, and G. Soucy: Light Metals 2010, Ed., J.A. Johnson, TMS, Warrendale, PA, 2010, pp. 811–16.
6. Y.W. Wang, N.X. Feng, J. You, J.P. Peng, S.J. Su, X.L. Duan, J.G. Wu, S.X. Ma, and C.G. Ma: Light Metals 2007, Ed., S. Morten, TMS, Warrendale, PA, 2007, pp. 1067–70.
7. Z. Fang, J. Li, X. J. Lü, Y.Q. Lai, and Z.L. Tian: Light Metals 2010, Ed., J.A. Johnson, TMS, Warrendale, PA, 2010, pp. 901–06.
8. J.L. Xue, J. Zhu, B.S. Li, and Q.S. Liu: Light Metals 2010, Ed., J.A. Johnson, TMS, Warrendale, PA, 2010, pp. 895–900.
9. M. Sørlie and H.A. Øye: Cathodes in Aluminium Electrolysis, 2nd ed., Aluminium-verlag GmbH, Dusseldorf, Germany, 1994, p. 7.
10. A. Tanaka, T. Abe, J. Mondon, C. Yamaguchic, K. Tokumitsu, and H. Matsui: Carbon, 2001, vol. 39, pp. 1567–73.10.1016/S0008-6223(00)00280-3 ↗
11. J.R. Kershaw and P.J. Smart: Carbon, 1994, vol. 32, pp. 85–92.10.1016/0008-6223(94)90012-4 ↗
12. P. Álvarez, R. Menéndez, and M. Granda: J. Anal. Appl. Pyrolysis, 2008, vol. 82, pp. 151–57.10.1016/j.jaap.2008.03.002 ↗
13. P. Álvarez, R. Menéndez, and M. Granda: Composites, 2005, vol. 36, pp. 649–57.10.1016/j.compositesa.2004.07.012 ↗
14. N. Miyajima, T. Akatsu, T. Ikoma, O. Ito, B. Rand, Y. Tanabea, and E. Yasuda: Carbon, 2000, vol. 38, pp. 1831–38.10.1016/S0008-6223(00)00022-1 ↗
15. S.M. Oh and Y.D. Park: Fuel, 1999, vol. 78, pp. 1859–65.10.1016/S0016-2361(99)00093-9 ↗
16. K. Kanno, N. Koike, Y. Korai, and I. Mochida: Carbon, 1998, vol. 36, pp. 869–74.10.1016/S0008-6223(97)00182-6 ↗
17. J. Zielinski, B. Pacewska, T. Brzozowska, and J. Machnikowski: J. Therm. Anal. Calorim., 2000, vol. 60, pp. 293–97.10.1023/A:1010138416670 ↗
18. L.M. Manocha, M. Patel, S.M. Manocha, C. Vix-Guterl, and P. Ehrburger: Carbon, 2001, vol. 39, pp. 663–71.10.1016/S0008-6223(00)00178-0 ↗
19. C. Blanco, R. Santamaría, J. Bermejo, and R. Menéndez: Carbon, 2000, vol. 38, pp. 517–23.10.1016/S0008-6223(99)00131-1 ↗
20. H. Marsh and P.L. Walker: Chem. Phys. Carbon, 1979, vol. 15, p. 230.
21. M. Hein: Erdoel Kohle, Erdgas, Petrochem, (Hydrocarbon Technology), 1990, vol. 43, p. 354.
22. J.B. Barr and I.C. Lewis: Carbon, 1978, vol. 16, pp. 439–44.10.1016/0008-6223(78)90090-8 ↗
23. J.J. Fernández, A. Figueiras, M. Ganda, J. Bermejo, and R. Menéndez: Carbon, 1995, vol. 33, pp. 295–307.10.1016/0008-6223(94)00130-R ↗
24. J. Li, X.J. Lü, Q.Y. Li, Y.Q. Lai, and J.H. Yang: J. Cent. South Univ. Technol., 2006, vol. 13, pp. 209–13.10.1007/s11771-006-0117-2 ↗
25. Q.L. Lin, W. Su, and Y. Xie: J. Anal. Appl. Pyrolysis, 2009, vol. 86, pp. 8–13.10.1016/j.jaap.2009.03.001 ↗
26. M. Harry and R.R. Francisco: Sciences of Carbon Materials, 1st ed., University of Alicante Press, Alicante, Spain, 2000, p. 238.
27. Q.L. Lin, T.H. Li, C.Z. Zheng, Y. Zhao, and S.H. Song: J. Anal. Appl. Pyrolysis, 2004, vol. 71, pp. 817–26.10.1016/j.jaap.2003.10.009 ↗
28. H. Marsh, M.M. Escandell, and F.R. Reinoso: Carbon, 1999, vol. 37, pp. 363–90.10.1016/S0008-6223(98)00205-X ↗
29. B. Grzyb, J. Machnikowski, J.V. Weber, A. Koch, and O. Heintz: J. Anal. Appl. Pyrolysis, 2003, vol. 67, pp. 77–93.10.1016/S0165-2370(02)00018-9 ↗
30. J.D. Brooks and G.H. Taylor: Chem. Phys. Carbon, 1968, vol. 4, pp. 243–86.
31. G. Bhatia, R.K. Aggarwal, N. Punjabi, and O.P. Bahl: J. Mater. Sci., 1994, vol. 29, pp. 4757–63.10.1007/BF00356520 ↗
32. G.R. Romovacek, J.P. McCullough, and A.J. Perrotta: Fuel, 1983, vol. 62, pp. 1236–38.10.1016/0016-2361(83)90073-X ↗
33. R. Moriyama, J.I. Hayashi, and T. Chiba: Carbon, 2004, vol. 42, pp. 2443–49.10.1016/j.carbon.2004.04.044 ↗
34. M. Granda, E. Casal, J. Bermejo, and R. Menéndez: Carbon, 2000, vol. 39, pp. 483–92.10.1016/S0008-6223(01)00006-9 ↗
35. M. Harry and R.R. Francisco: Sciences of Carbon Materials, 1st ed., University of Alicante Press, Alicante, Spain, 2000, pp. 337–38.
36. A. Figueiras, M. Granda, E. Casal, J. Bermejo, J. Bonhomme, and R. Menéndez: Carbon, 1998, vol. 36, pp. 883–91.10.1016/S0008-6223(97)00197-8 ↗
37. S.F. Wu, J.J. Liu, W. Zou, and W. Cheng: Mater. Rev., 2008, vol. 22, pp. 388–90.
38. J. Li, J. Fang, Q.Y. Li, and Y.Q. Lai: J. Cent. South Univ. Technol., 2004, vol. 11, pp. 400–04.10.1007/s11771-004-0083-5 ↗
39. Y.X. Liu and J. Li: Modern Aluminum Electrolysis, 1st ed., Metallurgy Industry Publication, Beijing, China, 2008, p. 242.