journal article·2015-08

Structural and Thermal Study of Nanocrystalline Fe-Al-B Alloy Prepared by Mechanical Alloying

Hana Ibn Gharsallah, Abderrahmen Sekri, Myriam Azabou, Luiza Escoda, Joan Josep Suñol, Mohamed Khitouni

Publisher page

Abstract

Nanostructured iron-aluminum alloy of Fe-25 at. pct Al composition doped with 0.2 at. pct B was prepared by mechanical alloying. The phase transformations and structural changes occurring in the studied material during mechanical alloying and during subsequent heating were investigated by SEM, XRD, and DSC techniques. The patterns so obtained were analyzed using the Rietveld program. The alloyed powders were disordered Fe(Al) solid solutions and Fe2B boride phase. The Fe2B boride phase is formed after 4 hours of milling. The crystallite size reduction to the nanometer scale (5 to 8 nm) is accompanied by an increase in lattice strains. The powder milled for 40 hours was annealed at temperatures of 523 K, 823 K, 883 K, and 973 K (250 °C, 550 °C, 610 °C, and 700 °C) for 2 hours. Low temperatures annealing are responsible for the relaxation of the disordered structure, while high temperatures annealing enabled supersaturated Fe(Al) solid solutions to precipitate out fines Fe3Al, Fe2Al5, and Fe4Al13 intermetallics and, also the recrystallization and the grain growth phenomena.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. M. Krasnowski, T.J. Kulik, Intermetallics, 2007, vol. 15, pp. 201–205.10.1016/j.intermet.2006.05.008 ↗
2. M. Krasnowski, A. Grabias, T. Kulik, J. Alloys Compd., 2006, Vol. 424, pp. 119–127.10.1016/j.jallcom.2005.12.077 ↗
3. R.N. Nogueira, C.G. Schon, Intermetallics, 2005, vol. 13, pp. 1233–1244.10.1016/j.intermet.2005.04.007 ↗
4. N.S. Stoloff, V.K. Sikka, Physical Metallurgy and Processing of Intermetallic, Limited, Springer, London, 2011.
5. D.D. Risanti, G. Sauthoff, Intermetallics, 2005, vol. 13, pp. 1313–1321.10.1016/j.intermet.2004.12.029 ↗
6. H. Gleiter, Prog. Mater. Sci., 1991, vol. 33, pp. 223–315.10.1016/0079-6425(89)90001-7 ↗
7. I. Baker, Scr. Mater., 1999, vol. 41, pp. 409–414.10.1016/S1359-6462(99)00100-1 ↗
8. Q. Zeng, I. Baker, Intermetallics, 2006, vol. 14, pp. 396–405.10.1016/j.intermet.2005.07.005 ↗
9. J.W. Cohron, Y. Lin, R.H. Zee, E.P. George, Acta Mater., 1998, vol. 46, pp. 6245–6256.10.1016/S1359-6454(98)00254-7 ↗
10. C.T. Liu, E.P. George, P.J. Maziasz, J.H. Schneibel, Mater. Sci. Eng. A., 1998, vol. 258, p. 84.10.1016/S0921-5093(98)00921-6 ↗
11. M.M. Rico, J.M. Greneche, G. A. Pérez Alcazar, J. Alloys Compd., 2005, vol. 308, pp. 26-32.10.1016/j.jallcom.2005.02.029 ↗
12. H. Gleiter, Prog. Mater. Sci., 1990, vol. 33, p. 223.10.1016/0079-6425(89)90001-7 ↗
13. W. Tebib, S. Alleg, R. Bensalem, N. Bensebaa, F.Z. Bentayeb, J.J. Sunol, J.M. Greneche, J. Nanosci. Nanotechnol., 2008, vol. 8, p. 2029.10.1166/jnn.2008.056 ↗
14. S. Alleg, F.Z. Bentayeb, R. Bensalem, C. Djebbari, L. Bessais, J.M. Greneche, Phys. Status Solidi A, 2008, vol. 205(7), p. 1641.10.1002/pssa.200824040 ↗
15. C. Suryanarayana, Prog. Mater Sci., 2001, vol. 46, p. 1.10.1016/S0079-6425(99)00010-9 ↗
16. M. SherifEl-Eskandarany, Noyes Publications, William Andrew Publishing, Norwich, NY, 2001.
17. C. Suryanarayana and C.C. Koch, eds.: Non-equilibrium Processing of Materials, Pergamon, New York, 1999, pp. 313–44.10.1016/S1470-1804(99)80058-3 ↗
18. H. Skoglund, M.K. Wedel, B. Karlson, Intermetallics, 2004, vol. 12(7-9), pp. 977-983.10.1016/j.intermet.2004.03.004 ↗
19. D.G. Morris, S. Gunther, Mater Sci. Eng. A, 1996, vol. 208(1), pp.7-19.10.1016/0921-5093(95)10041-5 ↗
20. J. Chao, D.G. Morris, M.A. Munoz-Morris, J.L. Gonzalez-Carrasco, Intermetallics, 2001, vol. 9(4), pp. 299-308.10.1016/S0966-9795(01)00005-X ↗
21. M.A. Munoz-Morris, A. Dodge, D.G. Morris. Nano. Struc. Mater., 1999, vol. 11(7), pp. 873-885.10.1016/S0965-9773(99)00385-2 ↗
22. M. Kransnowski, T. Kulik, Intermetallics, 2007, vol. 15(2), pp. 201-205.10.1016/j.intermet.2006.05.008 ↗
23. S.C. Deevi and V.K. Sikka: Intermetallics, 1996, vol 4, p. 357.10.1016/0966-9795(95)00056-9 ↗
24. S. Ohnuma, M. Nose, K. Shirakawa, and T. Masumoto: Sci. Rep. Res. Inst. Tohoku Univ. A, 1981, vol. 29, p. 254.
25. A. Inoue, K. Kobayashi, J. Kanehira, Sci. Rep. Res Inst. Tohoku University, Series A (Physics, Chemistry and Metallurgy), 1981, vol. 29(2), pp. 331-342.
26. N.S. Stoloff, Mater Sci. Eng. A, 1998, vol. 258, p. 1.10.1016/S0921-5093(98)00909-5 ↗
27. M. Palm, Intermetallics, 2005, vol. 13(12), pp. 1286-1295.10.1016/j.intermet.2004.10.015 ↗
28. M.A. Morris-Muñoz, A. Dodge, and D.G Morris: Nanostr. Mater., 1999, vol. 11, p. 873.10.1016/S0965-9773(99)00385-2 ↗
29. E. Apiñaniz, J.S. Garitaonandia, F. Plazaola, J. Non-Cryst. Solids, 2001, vol. 287, 302.
30. Kane SN, Gupta A, Gercsi Z, Mazaleyrat F, Varga LK, Magn. Magn. Mater., 2005, vol. 292, p. 447.10.1016/j.jmmm.2004.11.314 ↗
31. M. Mhadhbi, M. Khitouni, L. Escoda, J.J. Suñol, M. Dammak, J. Alloys Compd., 2012, vol. 509, pp. 3293-3298.10.1016/j.jallcom.2010.10.214 ↗
32. W. M. Tang, Z.X. Zheng, H.J. Tang, R. Ren, Y.C. Wu, Intermetallics. 2007, Vol. 15, pp. 1021-1026.10.1016/j.intermet.2006.12.005 ↗
33. S. Izadi, K. Janghorban, G.H. Akbari, M. Ghafari, E. Salahinejad, J. Alloys Compd., 2010, vol. 493, pp. 645-648.10.1016/j.jallcom.2009.12.173 ↗
34. M. Krifa, M. Mhadhbi, L. Escoda, J.M. Güell, J.J. Suñol, N. Llorca-Isern, C. Artieda-Guzmán, M. Khitouni, J. Alloys Compd., 2013, vol. 554, pp. 51–58.10.1016/j.jallcom.2012.11.131 ↗
35. R. Bensalem, S. Alleg, A. Younes, S. Souilah, S. Azzaza, and J.J. Sunol, Al-Azhar Univ. Eng. J. JAUES., 2008, vol. 3(13), p. 83.
36. X.D. Liu, K. Lu, Z.Q. Hu, B.Z. Ding, Nanostruct. Mater., 1993, vol. 2, p. 581.10.1016/0965-9773(93)90031-6 ↗
37. S. Alleg, M. Ibrir, N.E. Fenineche, S. Azzaza, R. Bensalem, J.J. Sunol, J. Alloys Compd., 2010, vol. 494, pp. 109–115.10.1016/j.jallcom.2010.01.013 ↗
38. M.A. Morris-Munoz, A. Dodge, D.G. Morris, NanoStruct. Mater. 1999, vol. 11, pp. 873–885.10.1016/S0965-9773(99)00385-2 ↗
39. J.M. Guilemany, N. Cinca, L. Casas, and E. Molins: J. Mater. Sci., 2009, vol. 44(8), pp. 2152–61.10.1007/s10853-009-3296-z ↗
40. Q. Zeng and I. Baker, Intermetallics, 2006, vol. 14(4), pp. 96–405.10.1016/j.intermet.2005.07.005 ↗
41. S.U. M. Zhu and K. Iwasaki, Mater. Sci. and Eng. A, 1999, vol. 270(2), pp. 170–177.10.1016/S0921-5093(99)00146-X ↗
42. F. Cardellini, F. Cleri, G. Mazzone, A. Montone, and V. Rosato: J. Mater. Res., 1993, vol. 8(10), pp. 2504–09.10.1557/JMR.1993.2504 ↗
43. Sh. EhtemamHaghighi, K. Janghorban, S. Izadi: J. Alloys Compd., 2010, vol. 495, pp. 260–64.10.1016/j.jallcom.2010.01.145 ↗
44. S.I. Mudryi, V.G. Chekh, Inorg. Mater., 1988, vol. 24, pp. 955-959.
45. F. Stein, G. Sauthoff, M. Palm. Z. Metallkd, 2004, vol. 95, pp. 469-485.10.3139/146.017985 ↗
46. O. Kubaschewski: Iron-Binary Phase Diagrams, Springer, Berlin, 1982, p. 5.
47. M. Ellner, J. Mayer, Scr. Metall. Mater., 1992, vol. 26, p. 501.10.1016/0956-716X(92)90637-T ↗