journal article·2020-09Open access

Effect of Nanopowder Addition on the Sintering of Water-Atomized Iron Powder

Swathi K. Manchili, Johan Wendel, Abdelhafid Zehri, Johan Liu, Eduard Hryha, Lars Nyborg

Abstract

Abstract A promising method of improving the densification of powder metallurgical steel components is to blend nanopowder with the otherwise typically used micrometre-sized powder. The higher surface-to-volume ratio of nanopowder is hypothesized to accelerate the sintering process and increase the inter-particle contact area between the powder particles. This is supposed to enhance the material transport and improve the densification. In the present investigation, water-atomized iron powder (− 45 μm) was mixed separately with pure iron and low-carbon steel nanopowder, each at a ratio of 95 to 5 pct. These powder mixes were compacted at different pressures (400, 600 and 800 MPa) and then sintered at 1350 °C in a pure hydrogen atmosphere. The sintering behavior of the powder blend compacts was compared to that of the compact with micrometre-sized powder only. Densification commenced at much lower temperatures in the presence of nanopowder. To understand this, sintering at intermittent temperatures such as 500 °C and 700 °C was conducted. The fracture surface revealed that the nanopowder was sintered at between 500 °C and 700 °C, which in turn contributed to the densification of the powder mix at the lower temperature range. Based on the sintering experiments, an attempt was made to calculate the activation energy and identify the associated sinter mechanism using two different approaches. It was shown that the first approach yielded values in agreement with the grain-boundary diffusion mechanism. As the nanopowder content increased, there was an increase in linear shrinkage during sintering.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Powder Metallurgy Techniques and Materials · Advanced materials and composites · Injection Molding Process and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. 1 H. Djohari and J.J. Derby: Chem. Eng. Sci., 2009, vol. 64, pp. 3810–6.10.1016/j.ces.2009.05.022 ↗
2. R.M. German: in Sintering: From Empirical Observations to Scientific Principles, R.M. German, ed., Butterworth-Heinemann, Boston, 2014, pp. 141–81.10.1016/B978-0-12-401682-8.00006-9 ↗
3. 3 F. Wakai, M. Yoshida, Y. Shinoda, and T. Akatsu: Acta Mater., 2005, vol. 53, pp. 1361–71.10.1016/j.actamat.2004.11.029 ↗
4. 4 J. Rajabi, N. Muhamad, and A.B. Sulong: Microsyst. Technol., 2012, vol. 18, pp. 1941–61.10.1007/s00542-012-1631-9 ↗
5. 5 J.W. Oh, R. Bollina, W.S. Lee, and S.J. Park: Powder Technol., 2016, vol. 302, pp. 168–76.10.1016/j.powtec.2016.08.051 ↗
6. 6 D. Wei, R. Dave, and R. Pfeffer: J. Nanoparticle Res., 2002, vol. 4, pp. 21–41.10.1023/A:1020184524538 ↗
7. 7 J. Fruhstorfer, S. Schafföner, and C.G. Aneziris: Ceram. Int., 2014, vol. 40, pp. 15293–302.10.1016/j.ceramint.2014.07.027 ↗
8. 8 J.-P. Choi, H.-G. Lyu, W.-S. Lee, and J.-S. Lee: Powder Technol., 2014, vol. 253, pp. 596–601.10.1016/j.powtec.2013.11.048 ↗
9. 9 S.K. Manchili, R. Shvab, A. Zehri, L. Ye, E. Hryha, J. Liu, and L. Nyborg: Surf. Interface Anal., 2018, vol. 50, pp. 1083–8.10.1002/sia.6465 ↗
10. 10 O. Dominguez, M. Phillippot, and J. Bigot: Scr. Metall. Mater., 1995, vol. 32, pp. 13–7.10.1016/S0956-716X(99)80003-X ↗
11. 11 S. V Matrenin, A.P. Il, A.I. Slosman, and L.O. Tolbanova: Russ. J. Non-Ferrous Met., 2009, vol. 50, pp. 513–7.10.3103/S1067821209050149 ↗
12. S. Patra, A. Gouthama, and K. Mondal: Prog. Nat. Sci. Mater. Int., 2014, vol. 24, pp. 608–22.10.1016/j.pnsc.2014.10.006 ↗
13. Manufacturing processes laboratory (mse 315), https://www.iitk.ac.in/mse/data/MSE_315A.pdf, (accessed 1 October 2018).
14. 14 J. Langner and J.R. Cahoon: Metall. Mater. Trans. A, 2010, vol. 41, pp. 1276–83.10.1007/s11661-010-0175-9 ↗
15. 15 E. Hryha, L. Nyborg, and L. Alzati: Powder Metall., 2015, vol. 58, pp. 7–11.10.1179/0032589914Z.000000000191 ↗
16. 16 D. Sivaprahasam, A.M. Sriramamurthy, S. Bysakh, G. Sundararajan, and K. Chattopadhyay: Metall. Mater. Trans. A, 2018, vol. 49, pp. 1410–24.10.1007/s11661-017-4457-3 ↗
17. 17 J. Wendel, R. Shvab, Y. Cao, E. Hryha, and L. Nyborg: Surf. Interface Anal., 2018, vol. 50, pp. 1065–71.10.1002/sia.6455 ↗
18. 18 Z.Z. Fang and H. Wang: Int. Mater. Rev., 2008, vol. 53, pp. 326–52.10.1179/174328008X353538 ↗
19. 19 D. Sivaprahasam, A.M. Sriramamurthy, S. Bysakh, and G. Sundararajan: Metall. Mater. Trans. A, 2018, vol. 49, pp. 1410–24.10.1007/s11661-017-4457-3 ↗
20. 20 J. Song, G.-Y. Lee, E.-J. Hong, C.S. Lee, and J.-S. Lee: J. Am. Ceram. Soc., 2019, vol. 102, pp. 3791–801.10.1111/jace.16240 ↗
21. 21 M.V. Gropyanov and G.V. Abbakumov: Sci. Sinter., 1975, vol. 7, pp. 3–15.
22. 22 R.M. German: Sintering Theory and Practice, John Wiley & Sons, New York, 1996.
23. 23 A. Inoue, H. Nitta, and Y. Iijima: Acta Mater., 2007, vol. 55, pp. 5910–6.10.1016/j.actamat.2007.06.041 ↗
24. 24 P. Roura and J. Farjas: J. Mater. Res., 2009, vol. 24, pp. 3095–8.10.1557/jmr.2009.0366 ↗