Development of New Third-Generation Medium Manganese Advanced High-Strength Steels Elaborating Hot-Rolling and Intercritical Annealing
Source abstract
Abstract
The effect of hot rolling and austenite revert transformation (ART) on the microstructure development and mechanical properties for a series of newly developed manganese steels with small carbon and/or boron content was investigated in this study. The cast steels were hot rolled, ART annealed and subjected to tensile testings after each step. The carbon-bearing alloy revealed a significant combination of ultimate tensile strength (UTS) and elongation (El. pct) with 1.1 GPa and 42 pct values, respectively. The boron-bearing alloy exhibited a UTS of 760 MPa having 30 pct elongation. Moreover, the carbon and boron alloyed steel had a fully martensitic structure with a UTS of 1.4 GPa and a negligible elongation. X-ray diffraction, SEM and electron backscatter diffraction analyses were used to rationalize the mechanical behaviour of the developed alloys. The higher ductility values for the boron alloyed and carbon alloyed steels were attributed to the presence of the austenite phase in conjunction with α′- and e-martensite and the transformation-induced martensite during the tensile loadings. The ART annealing at 290 °C, 450 °C and 510 °C increased the austenite fraction in the final microstructure of the boron alloyed and carbon alloyed steels but had an insignificant influence on the boron and carbon alloyed steels. It was concluded that the α′ → γ transformation occurring at higher ART annealing temperature is the dominant factor for the improved mechanical properties in the developed alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (71)
Show source-provided references
1. Kumar Roy T, Bhattacharya B, Ghosh C, Ajmani SK (eds) (2018) Advanced High Strength Steel Processing and Applications. Springer, Singapore
2. Demeri MY (2013) Advanced High-Strength Steels: Science, Technology, and Applications. ASM International, Materials Park10.31399/asm.tb.ahsssta.9781627082792 ↗
3. Song H, Sohn SS, Kwak JH, Lee BJ, Lee S (2016) Metall Mater Trans A 47A:2674–8510.1007/s11661-016-3433-7 ↗
4. S. Ying, H. Dong, X. Zhang, W. Yu, F. Ma, and F. Zhao: in Proc. FISITA 2012 World Automot. Congr., Springer, Berlin, 2013, pp. 933–47.10.1007/978-3-642-33835-9_86 ↗
5. De Cooman BC (2017) Automotive Steels. Elsevier, Amsterdam, pp. 317–8510.1016/B978-0-08-100638-2.00011-0 ↗
6. 6 B. Sun, F. Fazeli, C. Scott, N. Brodusch, R. Gauvin, and S. Yue: Acta Mater., 2018, vol. 148, pp. 249–62.10.1016/j.actamat.2018.02.005 ↗
7. 7 F. Huyan, J.-Y. Yan, L. Höglund, J. Ågren, and A. Borgenstam: Metall. Mater. Trans. A, 2018, vol. 49, pp. 1053–60.10.1007/s11661-018-4497-3 ↗
8. 8 Y.-K. Lee and J. Han: Mater. Sci. Technol., 2015, vol. 31, pp. 843–56.10.1179/1743284714Y.0000000722 ↗
9. 9 J. Zhao and Z. Jiang: Prog. Mater. Sci., 2018, vol. 94, pp. 174–242.10.1016/j.pmatsci.2018.01.006 ↗
10. 10 Z.P. Hu, Y.B. Xu, Y. Zou, R.D.K. Misra, D.T. Han, S.Q. Chen, and D.Y. Hou: Mater. Sci. Eng. A, 2018, vol. 720, pp. 1–10.10.1016/j.msea.2018.02.052 ↗
11. 11 S.S.S.-J. Lee, S.S.S.-J. Lee, and B.C. De Cooman: Scr. Mater., 2011, vol. 64, pp. 649–52.10.1016/j.scriptamat.2010.12.012 ↗
12. B. Hu, H. Luo, F. Yang, and H. Dong: J. Mater. Sci. Technol., 2017, vol. 33, pp. 1457–64.10.1016/j.jmst.2017.06.017 ↗
13. 13 H. Aydin, E. Essadiqi, I.-H. Jung, and S. Yue: Mater. Sci. Eng. A, 2013, vol. 564, pp. 501–8.10.1016/j.msea.2012.11.113 ↗
14. 14 D. Raabe, D. Ponge, O. Dmitrieva, and B. Sander: Scr. Mater., 2009, vol. 60, pp. 1141–4.10.1016/j.scriptamat.2009.02.062 ↗
15. 15 S.G. Hashemi and B. Eghbali: Mater. Sci. Eng. A, 2017, vol. 705, pp. 32–41.10.1016/j.msea.2017.07.094 ↗
16. 16 S. Qin, Y. Liu, Q. Hao, Y. Wang, N. Chen, X. Zuo, and Y. Rong: Mater. Sci. Eng. A, 2016, vol. 663, pp. 151–6.10.1016/j.msea.2016.03.122 ↗
17. 17 C.-Y. Lee, J. Jeong, J. Han, S.-J. Lee, S. Lee, and Y.-K. Lee: Acta Mater., 2015, vol. 84, pp. 1–8.10.1016/j.actamat.2014.10.032 ↗
18. 18 K. Li, V.S.Y. Injeti, R.D.K. Misra, Z.H. Cai, and H. Ding: Mater. Sci. Eng. A, 2018, vol. 711, pp. 515–23.10.1016/j.msea.2017.11.055 ↗
19. 19 D.Q. Zou, S.H. Li, J. He, B. Gu, and Y.F. Li: Mater. Sci. Eng. A, 2018, vol. 715, pp. 243–56.10.1016/j.msea.2018.01.011 ↗
20. 20 Y. Li, W. Li, W. Liu, X. Wang, X. Hua, H. Liu, and X. Jin: Acta Mater., 2018, vol. 146, pp. 126–41.10.1016/j.actamat.2017.12.035 ↗
21. 21 G.A. Thomas and J.G. Speer: Mater. Sci. Technol., 2014, vol. 30, pp. 998–1007.10.1179/1743284714Y.0000000546 ↗
22. 22 M. Askari-Paykani, H.R. Shahverdi, R. Miresmaeili, and H. Beladi: Mater. Sci. Eng. A, 2018, vol. 715, pp. 214–25.10.1016/j.msea.2018.01.002 ↗
23. 23 M. Askari-Paykani, H.R. Shahverdi, and R. Miresmaeili: Mater. Sci. Eng. A, 2016, vol. 668, pp. 188–200.10.1016/j.msea.2016.05.002 ↗
24. 24 M. Askari-Paykani, H.R. Shahverdi, and R. Miresmaeili: J. Mater. Process. Technol., 2016, vol. 238, pp. 383–94.10.1016/j.jmatprotec.2016.07.043 ↗
25. 25 M. Askari-Paykani, H.R. Shahverdi, and R. Miresmaeili: Metall. Mater. Trans. A, 2016, vol. 47, pp. 5423–37.10.1007/s11661-016-3713-2 ↗
26. 26 M. Askari-Paykani, H.R. Shahverdi, R. Miresmaeili, and H. Beladi: Mater. Charact., 2017, vol. 130, pp. 64–73.10.1016/j.matchar.2017.05.033 ↗
27. 27 K. Kumar, A. Pooleery, K. Madhusoodanan, R.N. Singh, J.K. Chakravartty, B.K. Dutta, and R.K. Sinha: Procedia Eng., 2014, vol. 86, pp. 899–909.10.1016/j.proeng.2014.11.112 ↗
28. De Cooman BC, Lee SJ, Shin S, Seo EJ, Speer JG (2017) Metall Mater Trans A 48A:39–4510.1007/s11661-016-3821-z ↗
29. Field DM, Van Aken DC (2018) Metall Mater Trans A 49A:1152–6610.1007/s11661-018-4481-y ↗
30. 30 F. Yang, H. Luo, E. Pu, S. Zhang, and H. Dong: Int. J. Plast., 2018, vol. 103, pp. 188–202.10.1016/j.ijplas.2018.01.010 ↗
31. 31 Z.H. Cai, H. Ding, R.D.K. Misra, and S.Q. Qiguan: Mater. Sci. Eng. A, 2016, vol. 652, pp. 205–11.10.1016/j.msea.2015.11.084 ↗
32. 32 Z.C. Li, R.D.K. Misra, Z.H. Cai, H.X. Li, and H. Ding: Mater. Sci. Eng. A, 2016, vol. 673, pp. 63–72.10.1016/j.msea.2016.07.023 ↗
33. 33 X. Ren, H. Fu, J. Xing, Y. Yang, and S. Tang: J. Mater. Res., 2017, vol. 32, pp. 3078–88.10.1557/jmr.2017.304 ↗
34. 34 Z. Lv, H. Fu, J. Xing, S. Ma, and Y. Hu: J. Alloys Compd., 2016, vol. 662, pp. 54–62.10.1016/j.jallcom.2015.11.171 ↗
35. 35 L. León-Reina, M. García-Maté, G. Álvarez-Pinazo, I. Santacruz, O. Vallcorba, A.G. De la Torre, and M.A.G. Aranda: J. Appl. Crystallogr., 2016, vol. 49, pp. 722–35.10.1107/S1600576716003873 ↗
36. 36 S. Morito, Y. Adachi, and T. Ohba: Mater. Trans., 2009, vol. 50, pp. 1919–23.10.2320/matertrans.MRA2008409 ↗
37. 37 X. Zhang, G. Miyamoto, Y. Toji, S. Nambu, T. Koseki, and T. Furuhara: Acta Mater., 2018, vol. 144, pp. 601–12.10.1016/j.actamat.2017.11.003 ↗
38. 38 S. Morito, Y. Edamatsu, K. Ichinotani, T. Ohba, T. Hayashi, Y. Adachi, T. Furuhara, G. Miyamoto, and N. Takayama: J. Alloys Compd., 2013, vol. 577, pp. S587–92.10.1016/j.jallcom.2012.02.004 ↗
39. Morito S, Tanaka H, Konishi R, Furuhara T, Maki T (2003) Acta Mater 51:1789–9910.1016/S1359-6454(02)00577-3 ↗
40. Zhou T, Prasath Babu R, Odqvist J, Yu H, Hedström P (2018) Mater Des 143:141–4910.1016/j.matdes.2018.01.049 ↗
41. 41 S. Takaki, M. Fujioka, S. Aihara, Y. Nagataki, T. Yamashita, N. Sano, Y. Adachi, M. Nomura, and H. Yaguchi: Mater. Trans., 2004, vol. 45, pp. 2239–44.10.2320/matertrans.45.2239 ↗
42. 42 D.T. Pierce, J.A. Jiménez, J. Bentley, D. Raabe, and J.E. Wittig: Acta Mater., 2015, vol. 100, pp. 178–90.10.1016/j.actamat.2015.08.030 ↗
43. Y. Lu: Effect of Boron on Microstructure and Mechanical Properties of Low Carbon Microalloyed Steels. Masters’ Thesis, McGill University, 2007.
44. 44 E. Farabi, P.D. Hodgson, G.S. Rohrer, and H. Beladi: Acta Mater., 2018, vol. 154, pp. 147–60.10.1016/j.actamat.2018.05.023 ↗
45. 45 P. Zhang, Y. Chen, W. Xiao, D. Ping, and X. Zhao: Prog. Nat. Sci. Mater. Int., 2016, vol. 26, pp. 169–72.10.1016/j.pnsc.2016.03.004 ↗
46. 46 G. Krauss: Steels: Processing, Structure, and Performance, ASM International, Ohio, USA, 2005.
47. Xiang C, Liu Z, Chen X, Li Y, Hu K (2009) J Iron Steel Res Int 16:37–5410.1016/S1006-706X(09)60041-8 ↗
48. 48 P.E. Busby, M.E. Warga, and C. Wells: JOM, 1953, vol. 5, pp. 1463–8.10.1007/BF03397637 ↗
49. 49 S.N. Ghali, H.S. El-faramawy, and M.M. Eissa: J. Miner. Mater. Charact. Eng., 2012, vol. 11, pp. 995–9.
50. 50 C. Zhao, W.Q. Cao, C. Zhang, Z.G. Yang, H. Dong, and Y.Q. Weng: Mater. Sci. Technol., 2014, vol. 30, pp. 791–9.10.1179/1743284713Y.0000000416 ↗
51. Matlock DK, Speer JG, Haldar A, Suwas S, Bhattacharjee D (2009) In: Haldar A, Suwas S, Bhattacharjee D (eds) Microstructure and Texture in Steels. Springer, London, pp. 185–20510.1007/978-1-84882-454-6_11 ↗
52. 52 Z.C. Li, H. Ding, R.D.K. Misra, and Z.H. Cai: Mater. Sci. Eng. A, 2017, vol. 682, pp. 211–9.10.1016/j.msea.2016.11.048 ↗
53. 53 X. Li, L. Chen, Y. Zhao, R. Devesh, K. Misra, and R.D.K. Misra: Mater. Des., 2018, vol. 142, pp. 190–202.10.1016/j.matdes.2018.01.026 ↗
54. 54 Q. Li, X. Huang, and W. Huang: Mater. Sci. Eng. A, 2016, vol. 662, pp. 129–35.10.1016/j.msea.2016.03.042 ↗
55. 55 J. Lu, L. Hultman, E. Holmström, K.H. Antonsson, M. Grehk, W. Li, L. Vitos, and A. Golpayegani: Acta Mater., 2016, vol. 111, pp. 39–46.10.1016/j.actamat.2016.03.042 ↗
56. 56 S. Allain, J.-P. Chateau, O. Bouaziz, S. Migot, and N. Guelton: Mater. Sci. Eng. A, 2004, vol. 387–389, pp. 158–62.10.1016/j.msea.2004.01.059 ↗
57. 57 O. Bouaziz, S. Allain, C.P. Scott, P. Cugy, and D. Barbier: Curr. Opin. Solid State Mater. Sci., 2011, vol. 15, pp. 141–68.10.1016/j.cossms.2011.04.002 ↗
58. 58 M. Moallemi, A. Zarei-Hanzaki, and A. Mirzaei: J. Mater. Eng. Perform., 2015, vol. 24, pp. 2335–40.10.1007/s11665-015-1501-6 ↗
59. Gupta A, Bhargava AK, Tewari R, Tiwari AN (2013) Metall Mater Trans A 44A:4248–5610.1007/s11661-013-1793-9 ↗
60. 60 H. Baker, ed.: ASM Handbook, Alloy Phase Diagrams, vol. 3, ASM International, Ohio, USA, 1992.
61. 61 W. Cao, C. Wang, C. Wang, J. Shi, M. Wang, H. Dong, and Y. Weng: Sci. China Technol. Sci., 2012, vol. 55, pp. 1814–22.10.1007/s11431-012-4877-7 ↗
62. De Cooman BC (2017) In: Rana R, Singh SB (eds) Automotive Steels. Woodhead Publishing, Cambridge, pp. 317–8510.1016/B978-0-08-100638-2.00011-0 ↗
63. 63 L. Bracke, L. Kestens, and J. Penning: Scr. Mater., 2007, vol. 57, pp. 385–8.10.1016/j.scriptamat.2007.05.003 ↗
64. 64 G.B. Olson and M. Cohen: J. Less Common Met., 1972, vol. 28, pp. 107–18.10.1016/0022-5088(72)90173-7 ↗
65. 65 N. Nakada, T. Tsuchiyama, S. Takaki, and N. Miyano: ISIJ Int., 2011, vol. 51, pp. 299–304.10.2355/isijinternational.51.299 ↗
66. 66 P. Dastur, A. Zarei-Hanzaki, M.H. Pishbin, M. Moallemi, and H.R. Abedi: Mater. Sci. Eng. A, 2017, vol. 696, pp. 511–9.10.1016/j.msea.2017.03.109 ↗
67. 67 S.S.F. de Dafé, F.L. Sicupira, F.C.S. Matos, N.S. Cruz, D.R. Moreira, and D.B. Santos: Mater. Res., 2013, vol. 16, pp. 1229–36.10.1590/S1516-14392013005000129 ↗
68. 68 F. Fazeli, N. Vanderesse, M. Jahazi, S. Yue, C. Scott, J. Chen, B. Sun, and P. Bocher: Scr. Mater., 2017, vol. 133, pp. 9–13.10.1016/j.scriptamat.2017.01.022 ↗
69. 69 L. Fu, M. Shan, D. Zhang, H. Wang, W. Wang, and A. Shan: Metall. Mater. Trans. A, 2017, vol. 48, pp. 2179–92.10.1007/s11661-017-3994-0 ↗
70. 70 K. Tomimura, S. Takaki, Y. Tokunaga, and A. Stainless: ISIJ Int., 1991, vol. 31, pp. 1431–7.10.2355/isijinternational.31.1431 ↗
71. 71 H. Lee, M.C. Jo, S.S. Sohn, A. Zargaran, J.H. Ryu, N.J. Kim, S. Lee, M. Chul, S. Su, A. Zargaran, J. Hyun, N.J. Kim, and S. Lee: Acta Mater., 2018, vol. 147, pp. 247–60.10.1016/j.actamat.2018.01.033 ↗