journal article·2019-04-15Open access

On the Dissolution Process of Manganese and Iron in Molten Aluminum

Ghadir Razaz, Torbjörn Carlberg

Abstract

Abstract The dissolution of Mn and Fe in liquid Al presents a challenge due to their high melting points and low diffusivity. A literature review reveals that the existing knowledge of the processes involved in the dissolution of both Fe and Mn in liquid Al is rather ambiguous. Thus, this work aimed to obtain more detailed insights into the dissolution behavior of Mn and Fe in various Al melts. The results of the Mn dissolution tests showed that three intermediate phases were involved in the dissolution process, all of which exhibited a smooth interface between Mn and the liquid. These three phases were identified as the γ2, Al11Mn4, and µ phases which grow slowly, penetrating the Mn particles. The results of the Fe dissolution tests showed that in pure Al, the Al5Fe2 phase dominates the dissolution process and penetrates the Fe particles. The addition of Ti into the molten Al alters the intermetallic compound formation by replacing Al5Fe2 by Al2Fe. The addition of Si significantly inhibited the Fe dissolution kinetics. A theoretical approach based on Ficks’ law was used to explain the experimentally obtained Mn and Fe dissolution rates. It showed that the surface area and shape of the additives significantly affected the dissolution processes.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. A. S. Najafabadi: Ph.D. thesis, McGill University, Canada, 1996, ISBN 0-612-12481-9.
2. Y. E. Lee and S. L. Houser: Light Metals, 2000, TMS, pp. 44-50.
3. G. Razaz, and T. Carlberg: Light Metals, 2016, TMS, pp. 731-36.10.1002/9781119274780.ch123 ↗
4. M. Farhani, M. Soltanieh and M. R. Aboutalebi: Int. J. Cast Metals Res., 2009, vol. 225, pp. 353-56.10.1179/174313309X380387 ↗
5. H.R Shahverdi, M.R Ghomashchi, S Shabestari, J Hejazi: Journal of Materials Processing Technology, 2002, vol. 124, pp. 345-352.10.1016/S0924-0136(02)00225-X ↗
6. X.J. Liu, I. Ohnuma, R. Kainuma, and K. Ishida: J. Phase Equilib., 1999, vol. 201, pp. 45-56.10.1361/105497199770335938 ↗
7. A. Bouayad, Ch. Gerometta, A. Belkebir and A. Ambari: Materials Science and Engineering. A, 2003, vol. 363, pp. 53-61.10.1016/S0921-5093(03)00469-6 ↗
8. K. Bouché, F. Barbier, A. Coulet: Materials Science and Engineering. A, 1998, vol. 249, pp. 167-175.10.1016/S0921-5093(98)00573-5 ↗
9. H. Rezaei, M. R. Akbarpour and H. R. Shahverdi: JOM, 2015, vol. 67, pp. 1443-1450.10.1007/s11837-015-1435-3 ↗
10. D. Naoi and M. Kajihara: Materials Science and Engineering. A. 2007, vol. 459, pp. 375-382.10.1016/j.msea.2007.01.099 ↗
11. G. Razaz and T. Carlberg: Conference on Solidification Processing, 2017, vol. 6th Decennial, pp. 180-83.
12. F. Yin, M. Zhao, Y. Liu, W. Han and Z. Li: Transactions of Nonferrous Metals Society of China, 2013, vol. 23, pp. 556-561.10.1016/S1003-6326(13)62499-1 ↗
13. N. Takata, M. Nishimoto, S. Kobayashi and M. Takeyama: Intermetallics, 2015, vol 67, pp. 1-11.10.1016/j.intermet.2015.07.011 ↗
14. C. Wagner: Acta Met., 1969, vol 17, pp. 99-107.10.1016/0001-6160(69)90131-X ↗
15. F.J.J. van Loo and G.D. Rieck: Acta Met., 1973, vol 21, pp. 61-71.10.1016/0001-6160(73)90220-4 ↗
16. V.I. Dybkov: J. of Materials Science, 1986, vol 21, pp. 3078-3084.10.1007/BF00553339 ↗
17. G.V. Kidson and G.D. Miller: Journal of Nuclear Materials, 1964, vol. 12, pp. 61-69.10.1016/0022-3115(64)90108-4 ↗
18. M.H.J. van Dal: PhD thesis, Technische Universiteit Eindhoven, Netherlands, 2001, ISBN 90-386-2982-6.
19. Z. Shi, H. Wei, H. Zhang, T. Jin, X. Sun and Q. Zheng: Int. J. Refract. Metals Hard Mater., 2016, vol 60, pp. 108-12.10.1016/j.ijrmhm.2016.07.009 ↗
20. G. Eggler, W. Auer and H. Kaesche: J. of Materials Science, 1986, vol 21, pp. 3348-3350.10.1007/BF00553379 ↗