ECCI Characterization of Dislocation Structures at a Non-propagating Fatigue Crack Tip: Toward Understanding the Effects of Mn-C and Cr-N Couples on Crack Growth Resistance
Source abstract
Abstract
We attempted to clarify the underlying mechanisms of the enhanced small-fatigue-crack resistance of Fe-Mn-C twinning-induced plasticity (TWIP) steel and high-nitrogen austenitic steel. To this end, we performed electron channeling contrast imaging near the tips of non-propagating fatigue cracks in Fe-18Cr-14Ni steel without a significant amount of interstitials, Fe-23Mn-0.5C TWIP steel, and Fe-25Cr-1N austenitic steel. The fatigue crack non-propagation limits of the TWIP steel and high-nitrogen steel were higher than that of the steel without a significant amount of interstitials; the higher limits of the TWIP steel and high-nitrogen steel are attributed to the Mn-C and Cr-N interactions, respectively. The enhanced small-fatigue-crack resistance of the Fe-23Mn-0.5C steel is attributed to local hardening at the crack tip caused by an increase in the dislocation density via dynamic strain aging. The enhanced dislocation planarity of the Fe-25Cr-1N steel, which is a result of the Cr-N interaction, is a significant factor that influences (i.e., increases) the crack resistance. The enhanced dislocation planarity results in dislocation pile-up stress at the crack tip, thereby preventing dislocation emission from the crack tip.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. J.R. Davis: Stainless Steels, ASM International, Materials Park, 1994.
2. L. Gardner: Prog. Struct. Eng. Mater., 2005, vol. 7, pp. 45–55.10.1002/pse.190 ↗
3. B. Gludovatz, A. Hohenwarter, D. Catoor, E.H. Chang, E.P. George, and R.O. Ritchie: Science, 2014, vol. 345, pp. 1153–8.10.1126/science.1254581 ↗
4. O. Grässel, L. Krüger, G. Frommeyer, and L. Meyer: Int. J. Plast., 2000, vol. 16, pp. 1391–409.10.1016/S0749-6419(00)00015-2 ↗
5. S. Hamada, T. Kinoshita, K. Morishige, K. Hayashi, T. Ishina, and H. Noguchi: Int. J. Fatigue, 2013, vol. 56, pp. 86–94.10.1016/j.ijfatigue.2013.08.006 ↗
6. B. Li, C. Jiang, X. Han, and Y. Li: Int. J. Fatigue, 2015, vol. 78, pp. 1–10.10.1016/j.ijfatigue.2015.02.022 ↗
7. G. Bertolino, V. Doquet, and M. Sauzay: Int. J. Fatigue, 2005, vol. 27, pp. 471–80.10.1016/j.ijfatigue.2004.11.001 ↗
8. E. Kerscher, K.-H. Lang, O. Vöhringer, and D. Löhe: Int. J. Fatigue, 2008, vol. 30, pp. 1838–42.10.1016/j.ijfatigue.2008.02.003 ↗
9. Z.-J. Xi, M. Koyama, Y. Yoshida, N. Yoshimura, K. Ushioda, and H. Noguchi: Philos. Mag. Lett., 2015, vol. 95, pp. 384–91.10.1080/09500839.2015.1076174 ↗
10. J. Dougherty, T. Srivatsan, and J. Padovan: Eng. Fract. Mech., 1997, vol. 56, pp. 167–87.10.1016/S0013-7944(96)00103-8 ↗
11. D. Wilson and J. Tromans: Acta Metall., 1970, vol. 18, pp. 1197–208.10.1016/0001-6160(70)90110-0 ↗
12. G. Oates and D. Wilson: Acta Metall., 1964, vol. 12, pp. 21–33.10.1016/0001-6160(64)90050-1 ↗
13. R. Ritchie and S. Suresh: Metall. Trans. A, 1982, vol. 13, pp. 937–40.10.1007/BF02642409 ↗
14. R. Pippan: Acta Metall. Mater., 1991, vol. 39, pp. 255–62.10.1016/0956-7151(91)90304-J ↗
15. J. Simmons: Mater. Sci. Eng. A, 1996, vol. 207, pp. 159–169.10.1016/0921-5093(95)09991-3 ↗
16. H. Berns: ISIJ Int., 1996, vol. 36, pp. 909–14.10.2355/isijinternational.36.909 ↗
17. H. Baba, T. Kodama, and Y. Katada: Corros. Sci., 2002, vol. 44, pp. 2393–407.10.1016/S0010-938X(02)00040-9 ↗
18. I. Karaman, H. Sehitoglu, H. Maier, and Y. Chumlyakov: Acta Mater., 2001, vol. 49, pp. 3919–33.10.1016/S1359-6454(01)00296-8 ↗
19. D.R. Steinmetz, T. Jäpel, B. Wietbrock, P. Eisenlohr, I. Gutierrez-Urrutia, A. Saeed-Akbari, T. Hickel, F. Roters, and D. Raabe: Acta Mater., 2013, vol. 61, pp. 494–510.10.1016/j.actamat.2012.09.064 ↗
20. M. Koyama, T. Sawaguchi, T. Lee, C.S. Lee, and K. Tsuzaki: Mater. Sci. Eng. A, 2011, vol. 528, pp. 7310–16.10.1016/j.msea.2011.06.011 ↗
21. D. Fabrègue, C. Landron, O. Bouaziz, and E. Maire: Mater. Sci. Eng. A, 2013, vol. 579, pp. 92–8.10.1016/j.msea.2013.05.013 ↗
22. O. Bouaziz, S. Allain, C. Scott, P. Cugy, and D. Barbier: Curr. Opin. Solid State Mater. Sci., 2011, vol. 15, pp. 141–68.10.1016/j.cossms.2011.04.002 ↗
23. Y.-K. Lee: Scr. Mater., 2012, vol. 66, pp. 1002–6.10.1016/j.scriptamat.2011.12.016 ↗
24. Y.N. Dastur and W.C. Leslie: Metall. Trans. A, 1981, vol. 12, pp. 749–59.10.1007/BF02648339 ↗
25. S.-J. Lee, J. Kim, S.N. Kane, and B.C. De Cooman: Acta Mater., 2011, vol. 59, pp. 6809–19.10.1016/j.actamat.2011.07.040 ↗
26. M. Koyama, T. Sawaguchi, and K. Tsuzaki: ISIJ Int., 2015, vol. 55, pp. 1754–61.10.2355/isijinternational.ISIJINT-2015-070 ↗
27. Y. Terazawa, T. Ando, T. Tsuchiyama, and S. Takaki: Steel Res. Int., 2009, vol. 80, pp. 473–6.
28. J.-B. Vogt: J. Mater. Process. Technol., 2001, vol. 117, pp. 364–9.10.1016/S0924-0136(01)00799-3 ↗
29. Q. Dai, Z. Yuan, X. Chen, and K. Chen: Mater. Sci. Eng. A, 2009, vol. 517, pp. 257–60.10.1016/j.msea.2009.05.006 ↗
30. T. Takemoto, K. Mukai, and K. Hoshino: Trans. Iron Steel Inst. Jpn., 1986, vol. 26, pp. 337–44.10.2355/isijinternational1966.26.337 ↗
31. C. Shao, F. Shi, and X. Li: Mater. Sci. Eng. A, 2016, vol. 667, pp. 208–16.10.1016/j.msea.2016.05.007 ↗
32. A.S. Hamada, L.P. Karjalainen, and J. Puustinen: Mater. Sci. Eng. A, 2009, vol. 517, pp. 68–77.10.1016/j.msea.2009.03.039 ↗
33. P. Ma, L. Qian, J. Meng, S. Liu, and F. Zhang: Mater. Sci. Eng. A, 2014, vol. 605, pp. 160–6.10.1016/j.msea.2014.03.035 ↗
34. K. Habib, M. Koyama, and H. Noguchi: Int. J. Fatigue, 2017, vol. 99, pp. 1–12.10.1016/j.ijfatigue.2017.02.009 ↗
35. K. Habib, M. Koyama, T. Tsuchiyama, and H. Noguchi: Int. J. Fatigue, 2017, vol. 104, pp. 158–70.10.1016/j.ijfatigue.2017.07.019 ↗
36. M. Koyama, Y. Yamamura, R. Che, T. Sawaguchi, K. Tsuzaki, and H. Noguchi: Int. J. Fatigue, 2017, vol. 94, pp. 1–5.10.1016/j.ijfatigue.2016.09.003 ↗
37. K. Habib, M. Koyama, T. Tsuchiyama, and H. Noguchi: Mater. Res. Lett., 2018, vol. 6, pp. 61–6.10.1080/21663831.2017.1392370 ↗
38. J. Ahmed, A. Wilkinson, and S. Roberts: Philos. Mag. Lett., 1997, vol. 76, pp. 237–46.10.1080/095008397178986 ↗
39. M. Koyama, H. Springer, S.V. Merzlikin, K. Tsuzaki, E. Akiyama, and D. Raabe: Int. J. Hydrogen Energy, 2014, vol. 39, pp. 4634–46.10.1016/j.ijhydene.2013.12.171 ↗
40. I. Gutierrez-Urrutia and D. Raabe: Scr. Mater., 2012, vol. 66, pp. 343–6.10.1016/j.scriptamat.2011.11.027 ↗
41. T. Onomoto, Y. Terazawa, T. Tsuchiyama, and S. Takaki: ISIJ Int., 2009, vol. 49, pp. 1246–52.10.2355/isijinternational.49.1246 ↗
42. M. Ojima, Y. Adachi, Y. Tomota, Y. Katada, Y. Kaneko, K. Kuroda, and H. Saka: Steel Res. Int., 2009, vol. 80, pp. 477–81.
43. H.-A. Nishikawa, Y. Oda, Y. Takahashi, and H. Noguchi: J. Solid Mech. Mater. Eng., 2011, vol. 5, pp. 179–90.10.1299/jmmp.5.179 ↗
44. M. Koyama, Y. Onishi, and H. Noguchi: Int. J. Fract., 2017, vol. 206, pp. 123–30.10.1007/s10704-017-0205-3 ↗
45. D. Barbier, N. Gey, N. Bozzolo, S. Allain, and M. Humbert: J. Microsc., 2009, vol. 235, pp. 67–78.10.1111/j.1365-2818.2009.03182.x ↗
46. J.-E. Jin and Y.-K. Lee: Mater. Sci. Eng. A, 2009, vol. 527, pp. 157–61.10.1016/j.msea.2009.08.028 ↗
47. M. Koyama, T. Sawaguchi, and K. Tsuzaki: ISIJ Int., 2013, vol. 53, pp. 323–9.10.2355/isijinternational.53.323 ↗
48. R.P. Reed: JOM, 1989, vol. 41, pp. 16–21.10.1007/BF03220991 ↗
49. D. Canadinc, C. Efstathiou, and H. Sehitoglu: Scr. Mater., 2008, vol. 59, pp. 1103–6.10.1016/j.scriptamat.2008.07.027 ↗
50. S. Allain, P. Cugy, C. Scott, J.-P. Chateau, A. Rusinek, and A. Deschamps: Int. J. Mater. Res., 2008, vol. 99, pp. 734–8.10.3139/146.101693 ↗
51. M. Koyama, T. Sawaguchi, and K. Tsuzaki: Philos. Mag. Lett., 2012, vol. 92, pp. 145–52.10.1080/09500839.2011.640645 ↗
52. M. Koyama, T. Sawaguchi, and K. Tsuzaki: Philos. Mag., 2012, vol. 92, pp. 3051–63.10.1080/14786435.2012.685769 ↗
53. L. Chen, H.-S. Kim, and S.-K. Kim: ISIJ Int., 2007, vol. 47, pp. 1804–12.10.2355/isijinternational.47.1804 ↗
54. M. Koyama, E. Akiyama, and K. Tsuzaki: ISIJ Int., 2013, vol. 53, pp. 1089–96.10.2355/isijinternational.53.1089 ↗
55. O. Bouaziz, S. Allain, and C. Scott: Scr. Mater., 2008, vol. 58, pp. 484–7.10.1016/j.scriptamat.2007.10.050 ↗
56. Y. Dastur and W. Leslie: Metall. Mater. Trans. A, 1981, vol. 12, pp. 749–59.10.1007/BF02648339 ↗
57. B. Hutchinson and N. Ridley: Scr. Mater., 2006, vol. 55, pp. 299–302.10.1016/j.scriptamat.2006.05.002 ↗
58. R. Schramm and R. Reed: Metall. Mater. Trans. A, 1975, vol. 6, pp. 1345–51.10.1007/BF02641927 ↗
59. R. Stoltz and J. Vander-Sande: Metall. Trans. A, 1980, vol. 11, pp. 1033–37.10.1007/BF02654717 ↗
60. V. Gerold and H.P. Karnthaler: Acta Metall., 1989, vol. 37, pp. 2177–83.10.1016/0001-6160(89)90143-0 ↗
61. Y. Tomota: J. Jpn. Soc. Heat Treat., 1996, vol. 36, pp. 218–23.
62. J. Sassen, A. Garratt-Reed, and W. Owen: High Nitrogen Steels HNS, 1988, vol. 88, pp. 159–62.
63. M. Ojima, Y. Adachi, Y. Tomota, K. Ikeda, T. Kamiyama, and Y. Katada: Mater. Sci. Eng. A, 2009, vol. 527, pp. 16–24.10.1016/j.msea.2009.07.066 ↗
64. M. Grujicic, J.-O. Nilsson, W. Owen, and T. Thorvaldsson: High Nitrogen Steels HNS, 1988, vol. 88, pp. 151–8.
65. A. Hunsche and P. Neumann: Acta Metall., 1986, vol. 34, pp. 207–17.10.1016/0001-6160(86)90192-6 ↗
66. M.R. Lin, M.E. Fine, and T. Mura: Acta Metall., 1986, vol. 34, pp. 619–28.10.1016/0001-6160(86)90177-X ↗
67. W. Elber: in Damage Tolerance in Aircraft Structures, ASTM International, Materials Park, 1971.
68. E. Wolf: Eng. Fract. Mech., 1970, vol. 2, pp. 37–44.10.1016/0013-7944(70)90028-7 ↗
69. S. Kubota, Y. Xia, and Y. Tomota: ISIJ Int., 1998, vol. 38, pp. 474–81.10.2355/isijinternational.38.474 ↗