journal article·2018-10Open access

Influence of Grain Refinement on Slurry Formation and Surface Segregation in Semi-solid Al-7Si-0.3Mg Castings

Jorge Santos, Lothar H. Kallien, Anders E. W. Jarfors, Arne K. Dahle

Abstract

Abstract This study aims to evaluate the effect of grain refinement on slurry formation and surface segregation in semi-solid castings produced by the Rheometal™ process. The effect of two grain refiners, Al-8B and Al-5Ti-1B, on the slurry α-Al grain size, shape factor and solid fraction was evaluated. The results suggest that the addition of a grain refiner can affect the solid fraction obtained in the RheometalTM process and, consequently, reduce the solute content near the casting surface. Grain refiner addition resulted in a larger fraction of α-Al grains ≤ 60 µm for the refined alloys compared with the unrefined alloy. Additionally, the growth of α-Al slurry globules was greater for the unrefined alloy compared with the refined alloy during solidification in the die-cavity. A more homogeneous and finer microstructure was observed near the surface in the grain-refined castings compared with the unrefined castings. Evidence of significant liquid penetration was identified in some α-Al globules, indicating that disintegration of α-Al globules may occur during the Rheometal™ casting process.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. J. Wannasin, R. Canyook, S. Wisutmethangoon, and M.C. Flemings: Acta Mater., 2013, vol. 61, pp. 3897–3903.10.1016/j.actamat.2013.03.029 ↗
2. M.A. Easton, M. Qian, A. Prasad, and D.H. StJohn: Curr. Opin. Solid State Mater. Sci., 2015, vol. 20, pp. 13–24.10.1016/j.cossms.2015.10.001 ↗
3. S. Nafisi and R. Ghomashchi: J. Mater. Process. Technol., 2006, vol. 174, pp. 371–83.10.1016/j.jmatprotec.2006.02.012 ↗
4. K.T. Kashyap and T. Chandrashekar: Bull. Mater. Sci., 2001, vol. 24, pp. 345–53.10.1007/BF02708630 ↗
5. Z. Yang, J.W. Bae, and C.G. Kang: Solid State Phenom., 2006, vol. 116–117, pp. 344–9.10.4028/www.scientific.net/SSP.116-117.344 ↗
6. A. Sharma: Metall. Ital., 2013, vol. 105, pp. 53–8.
7. M.A. Easton, H. Kaufmann, and W. Fragner: Mater. Sci. Eng. A, 2006, vol. 420, pp. 135–43.10.1016/j.msea.2006.01.078 ↗
8. S. Otarawanna, C.M. Gourlay, H.I. Laukli, and A.K. Dahle: Mater. Chem. Phys., 2011, vol. 130, pp. 251–8.10.1016/j.matchemphys.2011.06.035 ↗
9. R. Nadella, D.G. Eskin, Q. Du, and L. Katgerman: Prog. Mater. Sci., 2008, vol. 53, pp. 421–80.10.1016/j.pmatsci.2007.10.001 ↗
10. G. Govender and H. Möller: Solid State Phenom., 2008, vol. 143, pp. 433–8.10.4028/www.scientific.net/SSP.141-143.433 ↗
11. C.M. Gourlay, H.I. Laukli, and A.K. Dahle: Metall. Mater. Trans. A, 2007, vol. 38, pp. 1833–44.10.1007/s11661-007-9243-1 ↗
12. O. Granath, M. Wessén, and H. Cao: Int. J. Cast Met. Res., 2008, vol. 21, pp. 349–56.10.1179/136404608X320706 ↗
13. ASTM E562-11: ASTM Int., 2011, pp. 1–7.
14. L. Gao, Y. Harada, and S. Kumai: Mater. Charact., 2015, vol. 107, pp. 434–52.10.1016/j.matchar.2015.05.006 ↗
15. L. Gao, Y. Harada, and S. Kumai: Mater. Charact., 2015, vol. 107, pp. 426–33.10.1016/j.matchar.2015.01.005 ↗
16. X.G. Hu, Q. Zhu, H.V. Atkinson, H.X. Lu, F. Zhang, H.B. Dong, and Y.L. Kang: Acta Mater., 2017, vol. 124, pp. 410–20.10.1016/j.actamat.2016.11.031 ↗
17. M. Payandeh, A.E.W. Jarfors, and M. Wessén: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2016, vol. 47, pp. 1215–28.10.1007/s11661-015-3290-9 ↗
18. H.I. Laukli, C.M. Gourlay, and A.K. Dahle: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2005, vol. 36, pp. 805–18.10.1007/s11661-005-1011-5 ↗
19. S. Otarawanna, C.M. Gourlay, H.I. Laukli, and A.K. Dahle: Acta Mater., 2010, vol. 58, pp. 261–71.10.1016/j.actamat.2009.09.002 ↗
20. M. Payandeh, A.E.W. Jarfors, and M. Wessén: Solid State Phenom., 2013, 192: 392–97.
21. M. Hitchcock, Y. Wang, and Z. Fan: Acta Mater., 2007, vol. 55, pp. 1589–98.10.1016/j.actamat.2006.10.018 ↗
22. H.I. Laukli, L. Arnberg, and O. Lohne: Int. J. Cast Met. Res., 2005, vol. 18, pp. 65–72.10.1179/136404605225022919 ↗
23. M. Payandeh, M.H. Sabzevar, A.E.W. Jarfors, and M. Wessén: Metall. Mater. Trans. B, 2017, 47: 2836–48.10.1007/s11663-017-1061-2 ↗
24. M. Yan and W. Luo: Mater. Chem. Phys., 2007, vol. 104, pp. 267–70.10.1016/j.matchemphys.2007.02.093 ↗
25. A. Sharma, R. Gupta, and L. Ratke: in Materials Science and Technology Conference and Exhibition 2014, MS and T 2014, 2014, vol. 2, pp. 1243–51.
26. M.N. Laila Masrur, A.S. Anasyida, and H. Zuhailawati: Trans Tech Publications Ltd, 2014, vol. 1024, pp. 251–54.10.4028/www.scientific.net/AMR.1024.251 ↗
27. S.G. Lee, G.R. Patel, and A.M. Gokhale: Mater. Charact., 2005, vol. 55, pp. 219–24.10.1016/j.matchar.2005.05.009 ↗
28. C.M. Gourlay, A.K. Dahle, and H.I. Laukli: Metall. Mater. Trans. A, 2004, vol. 35, pp. 2881–91.10.1007/s11661-004-0236-z ↗
29. L. Bolzoni and N. Hari Babu: Appl. Mater. Today, 2016, vol. 5, pp. 255–59.10.1016/j.apmt.2016.11.001 ↗
30. A.K. Dahle, D.H. St John, P. Attavanich, and P. Taopetch: Mater. Sci. Forum, 2000, vol. 331–337, pp. 271–6.10.4028/www.scientific.net/MSF.331-337.271 ↗
31. R.D. Doherty, H.-I. Lee, and E.A. Feest: Mater. Sci. Eng., 1984, vol. 65, pp. 181–9.10.1016/0025-5416(84)90211-8 ↗
32. S. Ji: J. Mater. Sci., 2003, vol. 38, pp. 1559–64.10.1023/A:1022945219926 ↗
33. S. Karagadde, P.D. Lee, B. Cai, J.L. Fife, M.A. Azeem, K.M. Kareh, C. Puncreobutr, D. Tsivoulas, T. Connolley, and R.C. Atwood: Nat. Commun., 2015, vol. 6, p. 8300.10.1038/ncomms9300 ↗
34. Y.C. Lee, A.K. Dahle, D.H. StJohn, and J.E.C. Hutt: Mater. Sci. Eng. A, 1999, vol. 259, pp. 43–52.10.1016/S0921-5093(98)00884-3 ↗
35. D. Qiu, J.A. Taylor, M.X. Zhang, and P.M. Kelly: Acta Mater., 2007, vol. 55, pp. 1447–56.10.1016/j.actamat.2006.09.046 ↗
36. M. Riestra, E. Ghassemali, T. Bogdanoff, and S. Seifeddine: Mater. Sci. Eng. A, 2017, vol. 703, pp. 270–9.10.1016/j.msea.2017.07.074 ↗
37. H.D. Alamdari, D. Dubé, and P. Tessier: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2013, vol. 44, pp. 388–94.10.1007/s11661-012-1388-x ↗
38. T. Wang, Z. Chen, H. Fu, L. Gao, and T. Li: Mater. Sci. Eng. A, 2012, vol. 549, pp. 136–43.10.1016/j.msea.2012.04.019 ↗
39. Z. Chen, H. Kang, G. Fan, J. Li, Y. Lu, J. Jie, Y. Zhang, T. Li, X. Jian, and T. Wang: Acta Mater., 2016, vol. 120, pp. 168–78.10.1016/j.actamat.2016.08.045 ↗
40. B. Chalmers: J. Aust. Inst. Met., 1963, vol. 8, pp. 255–63.
41. S. Ji and Z. Fan: Metall. Mater. Trans. A, 2002, vol. 33, pp. 3511–20.10.1007/s11661-002-0338-4 ↗
42. W.D. Griffiths and D.G. McCartney: Mater. Sci. Eng., 1996, vol. A216, pp. 47–60.10.1016/0921-5093(96)10392-0 ↗
43. I. Maxwell and A. Hellawell: Acta Metall. 1975, 23; 229–37.
44. A.L. Greer, A.M. Bunn, A. Tronche, P. V. Evans, and D.J. Bristow: Acta Mater., 2000, vol. 48, pp. 2823–35.10.1016/S1359-6454(00)00094-X ↗
45. M. Easton and D. St John: Metall. Mater. Trans. A. 2005, 36: 1911–2010.1007/s11661-005-0054-y ↗
46. D.G. McCartney: Int. Mater. Rev., 1989, vol. 34, pp. 247–60.10.1179/imr.1989.34.1.247 ↗
47. Y. Birol: Mater. Sci. Technol., 2012, vol. 28, pp. 481–6.10.1179/1743284711Y.0000000058 ↗
48. L. Lu and A.K. Dahle: Light Met., 2006; 206: pp. 807–12.
49. J. Li, G. Yang, F.S. Hage, Z. Chen, T. Wang, Q.M. Ramasse, and P. Schumacher: Mater. Charact., 2017, vol. 128, pp. 7–13.10.1016/j.matchar.2017.03.029 ↗
50. K. Nogita, S.D. Mcdonald, and A.K. Dahle: Mater. Trans., 2003, vol. 44, pp. 692–5.10.2320/matertrans.44.692 ↗
51. P.L. Schaffer and A.K. Dahle: Mater. Sci. Eng. A, 2005, vol. 413–414, pp. 373–8.10.1016/j.msea.2005.08.202 ↗
52. K. Sukumaran, B.. Pai, and M. Chakraborty: Mater. Sci. Eng. A, 2004, vol. 369, pp. 275–83.10.1016/j.msea.2003.11.036 ↗