journal article·2018-10

Effects of Start and Finish Cooling Temperatures on the Yield Strength and Uniform Elongation of Strain-Based API X100 Pipeline Steels

Dong Ho Lee, Seok Su Sohn, Hyejin Song, Yunjo Ro, Chang Sun Lee, Sunghak Lee, Byoungchul Hwang

Publisher page

Abstract

Three types of strain-based API X100 pipeline steels composed of polygonal ferrite (PF), acicular ferrite (AF), granular bainite (GB), bainitic ferrite (BF), and martensite–austenite (MA) were fabricated by varying the start cooling temperature (SCT) and finish cooling temperature (FCT). The effect of the microstructure on the yield strength and uniform elongation before and after strain aging was investigated. In the H-H steel fabricated at a high SCT and low FCT, the reduction in uniform elongation after prestraining was small, but the uniform elongation after heat treatment increased because of the presence of many mobile dislocations around AF and GB, which are present in a relatively high fraction. Because the H-L steel fabricated at high SCT and low FCT has a considerable amount of BF as a result of the significant degree of supercooling, carbon atoms were readily trapped at dislocations inside the BF during heat treatment, which reduced the resistance to strain aging. On the other hand, the L-L steel had a large amount of soft PF transformed in the two-phase (austenite + ferrite) region and high fractions of AF and MA because it was fabricated at low SCT and low FCT. As a result, the uniform elongation of the L-L steel was slightly increased after heat treatment because mobile dislocations were readily generated around the PF and MA boundaries under deformation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. I. Tamura, H. Sekine, T. Tanaka, and C. Ouchi: Thermomechanical Processing of High-Strength Low-Alloy Steels, Butterworth–Heinemann, Oxford, England, 1988, pp. 80–100.10.1016/B978-0-408-11034-1.50007-6 ↗
2. US Patent Pub., 2007, No. 20070193666.
3. Y. Shinohara, T. Hara, E. Tsuru, and H. Asahi: Proc. 16th Int. Offshore Polar Eng. Conf., Lisbon, 2007, pp. 2949–54.
4. G. Shigesato, Y. Shinohara, T. Hara, M. Sugiyama, and H. Asahi: Proc. 16th Int. Offshore Polar Eng. Conf., Lisbon, 2007, pp. 2983–87.
5. D.B. Lillig: Proc. 18th Int. Offshore Polar Eng. Conf., Vancouver, 2008, pp. 1–12.
6. M.W. Hukle, B.D. Newbury, D.B. Lillig, J.J. Regina, and A.M. Horn: Proc. 27th Int. Conf. on Offshore Mech. and Arctic Eng., Estoril, 2008, pp. 16–19.
7. N. Ishikawa, H. Sueyoshi, and N. Shikanai: Proc. 19th Int. Offshore Polar Eng. Conf., Osaka, 2009, pp. 43–49.
8. K. Nagai, Y. Shinohara, S. Sakamoto, E. Tsuru, and H. Asahi: Proc. 19th Int. Offshore Polar Eng. Conf., Osaka, Japan, 2009, pp. 56–60.
9. T. Hara, Y. Shinohara, Y. Terada, H. Asahi, and N. Doi: Proc. 19th Int. Offshore Polar Eng. Conf., Osaka, Japan, 2009, pp. 73–79.
10. D. Hull and D.J. Bacon: Introduction to Dislocations, 5th ed., Elsevier Ltd., Amsterdam, 2011.
11. H. Igari, H. Nakamura, and S. Okaguchi: Proc. 21th Int. Offshore Polar Eng. Conf., Hawaii, 2011, pp. 569–74.
12. T. Hara, Y. Shinohara, Y. Hattori, T. Muraki, and N. Doi: Proc. 21th Int. Offshore Polar Eng. Conf., ISOPE, Hawaii, 2011, pp. 575–80.
13. H.K. Sung, D.H. Lee, S,Y. Shin, S. Lee, Y. Ro, C.S. Lee, and B. Hwang: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 3989–98.10.1007/s11661-015-2984-3 ↗
14. H.K. Sung, D.H. Lee, S. Lee, H.S. Kim, Y. Ro, C.S. Lee, B. Hwang, and S.Y. Shin: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 2726–38.10.1007/s11661-016-3453-3 ↗
15. J. Hu, L.-X. Du, J.-J. Wang, C.-R. Gao, T.-Z. Yang, A.-Y. Wang, and R.D.K. Misra: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 4937–47.10.1007/s11661-013-1839-z ↗
16. V. Colla, M. Desanctis, A. Dimatteo, G. Lovicu, and R. Valentini: Metall. Mater. Trans. A, 2011, vol. 41A, pp. 2781–93.10.1007/s11661-011-0702-3 ↗
17. B. Hwang, C.G. Lee, and S. Lee: Mater. Sci. Forum, 2010, vol. 638-642, pp. 3266–71.10.4028/www.scientific.net/MSF.638-642.3266 ↗
18. B. Hwang, Ph.D. Dissertation, Pohang University of Science and Technology, Pohang, 2004.
19. T. Araki: Atlas for Bainitic Microstructures, ISIJ, Tokyo, 1992, pp. 1–100.
20. G. Krauss and S.W. Thompson: ISIJ Int., 1995, vol. 35, pp. 937–45.10.2355/isijinternational.35.937 ↗
21. S.W. Thompson, D.J. Colvin, and G. Krauss: Metall. Trans. A, 1990, vol. 21A, pp. 1493–1507.10.1007/BF02672564 ↗
22. F.S. LePera: Metallography, 1979, vol. 12, pp. 263–68.10.1016/0026-0800(79)90041-7 ↗
23. V. Randle and O. Engler: Introduction to Texture Analysis, CRC Press, Boca Raton, USA, 2014, pp. 153–88.
24. C. Capdevila, F.G. Caballero, and C. Garcia de Andres: ISIJ Int., 2003, vol. 42, pp. 894–902.10.2355/isijinternational.42.894 ↗
25. K.W. Andrew: JISI, 1965, vol. 203, pp. 721–27.
26. C.Y. Kung and J.J. Raymond: Metall. Trans. A, 1982, vol. 13A, pp. 328–31.10.1007/BF02643327 ↗
27. D.P. Koistinen and R.E. Marburger: Acta Metall., 1959, vol. 7, pp. 59–60.10.1016/0001-6160(59)90170-1 ↗
28. M. Calcagnotto, Y. Adachi, D. Ponge, and D. Raabe: Acta Mater., 2011, vol. 59, pp. 658–70.10.1016/j.actamat.2010.10.002 ↗
29. T. Sourmail and V. Smanio: Acta Mater., 2013, vol. 61, pp. 2639–48.10.1016/j.actamat.2013.01.044 ↗