journal article·2018-08Open access

Droplet Evolution and Refinement During Liquid–Liquid Decomposition of Zn-6 Wt Pct Bi Immiscible Alloy Under High Static Magnetic Fields

Tianxiang Zheng, Yunbo Zhong, Jiang Wang, Zhongming Ren, Weili Ren, Zuosheng Lei, Francois Debray, Eric Beaugnon, Xicheng Wei

Abstract

Abstract In situ solidification experiments on Zn-6 wt pct Bi immiscible alloys were conducted to investigate the droplet evolution under high static magnetic fields (HSMFs). The results showed that a microstructure with extremely fine Bi-rich particles distributed in the matrix can be obtained under an HSMF of 29 T. The average diameter of the Bi-rich phase decreased with the increasing magnetic flux density. Stokes sedimentation disappeared when the HSMF was larger than 18 T. Starting at an HSMF of 18 T, Bi-rich droplets grew via pure diffusion in the liquid matrix. The HSMF decreased the spacing of the droplet arrays when the cooling rate (R) was approximately 1600 °C/min. The formation of a Zn-rich phase surrounded by a Bi-rich shell at HSMFs below 18 T, when R was approximately 60 °C/min, was attributed to the thermoelectric magnetic force.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. A. Inoue, N. Yano, K. Matsuzaki, and T. Masumoto: J. Mater. Sci., 1987, vol. 22, pp. 123–31.10.1007/BF01160560 ↗
2. K. Uenishi, H. Kawaguchi, and K.F. Kobayashi: J. Mater. Sci., 1994, vol. 29, pp. 4860–5.10.1007/BF00356535 ↗
3. S.H. Gelles and A.J. Markworth: AIAA J., 1978, vol. 16, pp. 431–8.10.2514/3.60908 ↗
4. T. Carlberg and H. Fredriksson: Metall. Mater. Trans. A, 1980, vol. 11, pp. 1665–76.10.1007/BF02660521 ↗
5. J.Z. Zhao, H.L. Li, H.Q. Li, C.Y. Xing, X.F. Zhang, Q.L. Wang, and J. He: Comput. Mater. Sci., 2010, vol. 49, pp. 121–5.10.1016/j.commatsci.2010.04.034 ↗
6. H. Jiang, J. Zhao, and J. He: J. Mater. Sci. Technol., 2014, vol. 30, pp. 1027–35.10.1016/j.jmst.2014.01.008 ↗
7. J. Zhu, T Wang, F. Cao, H. Fu, Y. Fu, H. Xie, and T. Xiao: J. Mater. Eng. Perform., 2013, vol. 22, pp. 1319–23.10.1007/s11665-012-0421-y ↗
8. H. Jiang, J. He, and J. Zhao: Sci. Rep.-UK., 2015, vol. 5, pp. 12680.10.1038/srep12680 ↗
9. H. Yasuda, I. Ohnaka, O. Kawakami, K. Ueno, and K. Kishio: ISIJ Int., 2003, vol. 43, pp. 942–9.10.2355/isijinternational.43.942 ↗
10. Y. Zhang, J. Gao, H. Yasuda, M. Kolbe, and G. Wilde: Scr. Mater., 2014, vol. 82, pp. 5–8.10.1016/j.scriptamat.2014.03.003 ↗
11. J.A. Shercliff: J. Fluid Mech., 1979, vol. 91, pp. 231–51.10.1017/S0022112079000136 ↗
12. X. Li, Y. Fautrelle, and Z. Ren: Acta Mater., 2007, vol. 55. pp. 3803–13.10.1016/j.actamat.2007.02.031 ↗
13. J.K. Choi, H. Ohtsuka, Y. Xu, and W.Y. Choo: Scr. Mater., 2000, vol. 43, pp. 22126.10.1016/S1359-6462(00)00394-8 ↗
14. M. Enomoto, H. Guo, Y. Tazuke, Y.R. Abe, and M. Shimotomai: Metall. Mater. Trans. A, 2001, vol. 32, pp. 445–53.10.1007/s11661-001-0061-6 ↗
15. W. Liu, D.R. Ou, H.H. Zhou, G.Y. Tang, and F. Wu: J. Mater. Res., 2001, vol. 16, pp. 2280–2.10.1557/JMR.2001.0313 ↗
16. H.D. Joo, J.K. Choi, S.U. Kim, N.S. Shin, and Y.M. Koo: Metall. Mater. Trans. A, 2004, vol. 35, pp. 1663–8.10.1007/s11661-004-0075-y ↗
17. Y. Zhong, T. Zheng, L. Dong, B. Zhou, W. Ren, J. Wang, Z. Ren, F. Debray, E. Beaugnon, H. Wang, Q. Wang, and Y. Dai: Mater. Design, 2016, vol. 100, pp. 168–74.10.1016/j.matdes.2016.03.078 ↗
18. T.X. Zheng, Y.B. Zhong, Z.S. Lei, W.L. Ren, Z.M. Ren, F. Debray, E. Beaugnon, and Y. Fautrelle: J. Alloy Compd., 2015, vol. 623, pp. 36–41.10.1016/j.jallcom.2014.10.095 ↗
19. G. Jingjie, L. Yuan, J. Jun, S. Yanqing, D. Hongsheng, Z. Jiuzhou, and X. Xiang: Scr. Mater., 2001, vol. 45, pp. 1197–204.10.1016/S1359-6462(01)01150-2 ↗
20. H. Neumann, Y. Plevachuk, and F. Allenstein: Mater. Sci. Eng. A, 2003, vol. 361, pp. 155–64.10.1016/S0921-5093(03)00512-4 ↗
21. B. Majumdar and K. Chattopadhyay: Metall. Mater. Trans. A, 2000, vol. 31. pp. 1833–42.10.1007/s11661-006-0245-1 ↗
22. R.N. Grugel, T.A. Lograsso, and A. Hellawell: Metall. Mater Trans A, 1984, vol. 15, pp. 1003–12.10.1007/BF02644692 ↗
23. B. Toloui, A.J. Macleod, D.D. Double: in Proc Conf In Situ Composites IV, F.D. Lemkey, H.E. Cline, and M. Melean, eds., Elsevier Science Publishing Co., New York, 1981, pp. 253–66.
24. Y. Tanimoto, H. Hayashi, S. Nagakura, H. Sakuragi, and K. Tokumaru: Chem. Phys. Lett., 1976, vol. 41, pp. 267–9.10.1016/0009-2614(76)80807-X ↗
25. T. Kakeshita, K. Shimizu, S. Funada, and M. Date: Acta Met., 1985, vol. 33, pp. 1381–9.10.1016/0001-6160(85)90039-2 ↗
26. M. Yamaguchi and Y. Tanimoto: Magneto Science, Kodansha Ltd., Tokyo, 2006, pp. 3-4.10.1007/978-3-540-37062-8 ↗
27. G. Busch and S. Yuan: Phys. Kondens. Materie, 1963, vol. 1, pp. 37–66.
28. N.H. Nachtrieb: J. Phys. Chem., 1962, vol. 66, pp. 1163–7.10.1021/j100812a045 ↗
29. S. Takeuchi and H. Endo: Trans. Jap. Inst. Metals, 1961, vol. 2, pp. 243–5.10.2320/matertrans1960.2.243 ↗
30. W. Chester: J. Fluid Mech., 1957, vol. 3, pp. 304–8.10.1017/S0022112057000671 ↗
31. H. Lamb: Hydrodynamics, 2nd ed., Dover, New York, 1932, pp. 599-601.
32. C. Zener: J Appl. Phys., 1949, vol. 20, pp. 950–3.10.1063/1.1698258 ↗
33. L. Ratke and S. Diefenbach: Mater. Sci. Eng. R, 1995, vol. 15, pp. 263–347.10.1016/0927-796X(95)00180-8 ↗