Effect of Annealing Treatment on Σ3-Type CSL Boundaries and Its Interactions in 304HCu Grade Austenitic Stainless Steel
Source abstract
Abstract
This paper presents the results of a study on grain boundary characteristics in cold deformed and annealed 304HCu grade austenitic stainless steel (SS 304HCu) using electron backscatter diffraction. The microstructure exhibited an increasing fraction of Σ1 to 29 coincidence site lattice boundaries with annealing temperature, resulting up to ~60 pct at 1573 K with 92 pct contribution from Σ3-type twin boundary. However, the twin boundary interaction at the triple points with a network of Σ3–Σ3–Σ9 was found to decrease from 4 to 0.5 pct with annealing temperature. To understand the resultant boundary advancement of the Σ3 n (n = 1, 2, 3) boundaries, their migration was traced in the annealed specimen. However, in the specimen with extended annealing Σ3 boundary fraction was found to be higher with a concomitant decrease in the boundary fraction generated by the Σ3 interactions. In this study, a procedure to analyze the coherency of Σ3 boundaries and its interfaces that form due to Σ3 interactions has been evolved based on single-section analysis using the pole concentration across the grains. Further, a crystallographic description of the two planes meeting at the interface of Σ3-type boundary has been provided by adopting serial sectioning methods, which help to understand the morphological changes. The quantitative deviation from exact coherent Σ3 has been estimated to be within ~6 deg in this study.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. K. Mayer, W. Bendick, R. Husemann, T. Kern, and R. Scarlin: PWR, vol. 33, pp. 831–41.
2. D. Thornton and K. Meyer: in Advanced Heat Resistant Steels for Power Generation, R. Viswanathan and J.W. Nutting, eds., 1999, pp. 349–65.
3. R. Viswanathan and W. Bakker: J. Mater. Eng. Perform., 2001, vol. 10(1), pp. 81-95.10.1361/105994901770345394 ↗
4. P.S. Weitzel: ASME 2011 Power Conference Collocated with JSME ICOPE 2011, American Society of Mechanical Engineers, 2011, pp. 281–91.
5. H.L. Hendrix: Proc. Seventh Int. Conf., October 22–25, 2013, Waikoloa, Hawaii, USA, ASM International, 2014, pp. 60–73.
6. T. Watanabe: J. Mater. Sci., 2011, vol. 46, pp. 4095-4115.10.1007/s10853-011-5393-z ↗
7. D. Brandon: Acta. Metall. Mater., 1966, vol. 14, pp. 1479-1484.10.1016/0001-6160(66)90168-4 ↗
8. V. Randle: Scripta Mater., 2001, vol. 44, pp. 2789-2794.10.1016/S1359-6462(01)00975-7 ↗
9. T. Watanabe, H. Fujii, H. Oikawa and K. Arai: Acta. Metall. Mater., 1989, vol. 37, pp. 941-952.10.1016/0001-6160(89)90021-7 ↗
10. R. Jones and V. Randle: Mater. Sci. Eng. A, 2010, vol. 527, pp. 4275-4280.10.1016/j.msea.2010.03.058 ↗
11. L. Tan, K. Sridharan, T.R. Allen, R.K. Nanstad and D.A. McClintock: J. Nuc. Mater., 2008, vol. 374, pp. 270-280.10.1016/j.jnucmat.2007.08.015 ↗
12. H. Kokawa, M. Shimada, M. Michiuchi, Z. Wang and Y. Sato, Acta. Metall. Mater., 2007, vol. 55, pp. 5401-5407.10.1016/j.actamat.2007.06.005 ↗
13. S. Kobayashi, T. Inomata, H. Kobayashi, S. Tsurekawa and T. Watanabe: J. Mater. Sci., 2008, vol. 43, pp. 3792-3799.10.1007/s10853-007-2236-z ↗
14. B.W. Reed, M. Kumar, R.W. Minich and R.E. Rudd: Acta. Metall. Mater., 2008, vol. 56, pp. 3278-3289.10.1016/j.actamat.2008.03.019 ↗
15. C.-S. Kim, Y. Hu, G.S. Rohrer and V. Randle: Scripta Mater., 2005, vol. 52, pp. 633-637.10.1016/j.scriptamat.2004.11.025 ↗
16. V. Randle: Acta. Metall. Mater., 2004, vol. 52, pp. 4067-4081.10.1016/j.actamat.2004.05.031 ↗
17. S. Mandal, A. Bhaduri and V.S. Sarma: J. Mater. Sci., 2011, vol. 46, pp. 275-284.10.1007/s10853-010-4982-6 ↗
18. G. Owen and V. Randle: Scripta Mater., 2006, vol. 55, pp. 959-962.10.1016/j.scriptamat.2006.04.049 ↗
19. W. Wang and H. Guo: Mater. Sci. Eng. A, 2007, vol. 445, pp. 155-162.10.1016/j.msea.2006.09.034 ↗
20. S.G. Chowdhury, P. Kumar, A. Das, S.K. Das, B. Mahato and P. De: Phil. Mag. Lett., 2008, vol. 88, pp. 407-414.10.1080/09500830802108460 ↗
21. M.K. Dash, T. Karthikeyan and S. Saroja, T. Indian I. Metals: 2017, vol. 70, pp. 133-143.10.1007/s12666-016-0868-x ↗
22. G.S. Rohrer, D.M. Saylor, B.E. Dasher, B.L. Adams, A.D. Rollett and P. Wynblatt: Z. Metallkd., 2004, vol. 95, pp. 197-214.10.3139/146.017934 ↗
23. M. Upmanyu, D. Srolovitz, L. Shvindlerman and G. Gottstein: Acta. Metall. Mater., 1999, vol. 47, pp. 3901-3914.10.1016/S1359-6454(99)00240-2 ↗
24. M. Demirel, A. Kuprat, D. George and A. Rollett: Phys. Rev. Lett., 2003, vol. 90, pp. 016106.10.1103/PhysRevLett.90.016106 ↗
25. M. Upmanyu, R. Smith and D.J. Srolovitz: Interface Sci., 1998, vol. 6, pp. 41-58.10.1023/A:1008608418845 ↗
26. B. Schönfelder, D. Wolf, S. Phillpot and M. Furtkamp: Interface Sci., 1997, vol. 5, pp. 245-262.10.1023/A:1008663804495 ↗
27. H. Zhang, M. Mendelev and D. Srolovitz: Acta. Metall. Mater., 2004, vol. 52, pp. 2569-2576.10.1016/j.actamat.2004.02.005 ↗
28. M.K. Dash, T. Karthikeyan, R. Mythili, V. Vijayanand and S. Saroja: Metall. Trans. A, 2017, vol. 48, pp. 4883-4894.10.1007/s11661-017-4260-1 ↗
29. Z. Guo, N. Saunders, J.P. Schillè and A.P. Miodownik: Mater. Sci. Engg. A, 2009, vol. 499, pp. 7-13.10.1016/j.msea.2007.09.097 ↗
30. V. Gertsman and S.M. Bruemmer: Acta. Metall. Mater., 2001, vol. 49, pp. 1589-1598.10.1016/S1359-6454(01)00064-7 ↗
31. T. Karthikeyan and S. Saroja: J Appl Crystallogr., 2013, vol. 46, pp. 1221-1224.10.1107/S0021889813014283 ↗
32. Lin F X, Godfray A, Jensen D J and Winther: G Mater Charac., 2010, vol. 61, pp. 1203.10.1016/j.matchar.2010.07.013 ↗
33. George E. Dieter: Mechanical Metallurgy, 2nd ed., McGraw-Hill Book Co., New York, NY, 1988.
34. D.G. Brandon: Acta. Metall. Mater., 1996, vol. 14, pp. 1479–148410.1016/0001-6160(66)90168-4 ↗
35. A. Morawiec: Scripta Mater., 2009, vol. 61, pp. 438-440.10.1016/j.scriptamat.2009.04.037 ↗
36. H. Beladi and G.S. Rohrer: Metall. Trans. A, 2013, vol. 44, pp. 115-124.10.1007/s11661-012-1393-0 ↗
37. J. Mackenzie: Acta. Metall. Mater., 1964, vol. 12, pp. 223-225.10.1016/0001-6160(64)90191-9 ↗
38. T. Karthikeyan, M.K. Dash, S. Saroja and M. Vijayalakshmi: Metall. Trans. A, 2013, vol. 44, pp. 1673-1685.10.1007/s11661-012-1549-y ↗
39. D. L. Engelberg, F. J. Humphreys and T. J. Marrow: J. Microscopy, 2008, vol. 230, pp. 435–444.10.1111/j.1365-2818.2008.02003.x ↗
40. R. Fullman and J. Fisher: J. Appl. Phys., 1951, vol. 22, pp. 1350-1355.10.1063/1.1699865 ↗
41. H. Gleiter: Acta. Metall. Mater., 1969, vol. 17, pp. 1421-1428.10.1016/0001-6160(69)90004-2 ↗
42. M.A. Meyers and L.E. Murr: Acta. Metall. Mater., 1978, vol. 26, pp. 951-962.10.1016/0001-6160(78)90046-9 ↗
43. V. Randle, The role of the coincidence site lattice in grain boundary engineering, Maney Pub., 1996.
44. J. Wang, N. Li, O. Anderoglu, X. Zhang, A. Misra, J. Huang and J. Hirth: Acta. Metall. Mater., 2010, vol. 58, pp. 2262-2270.10.1016/j.actamat.2009.12.013 ↗
45. E. Nes, N. Ryum and O. Hunderi: Acta. Metall. Mater., 1985, vol. 33, pp. 11.10.1016/0001-6160(85)90214-7 ↗
46. R.D. Doherty: Prog. Mater. Sci., 1997, vol. 42, pp. 39.10.1016/S0079-6425(97)00007-8 ↗
47. R.D. Doherty, Hughes D.A., F.J. Humphreys, J.J. Jonas, D.J. Juul, M.E. Kassner, W.E. King, T.R. McNelleyH.J. McQueen H.J. and A.D. Rollet, Mater. Sci. Eng. 1997, vol. A238, pp. 219.10.1016/S0921-5093(97)00424-3 ↗
48. V. Randle: Acta. Metall. Mater., 1998, vol. 46, pp. 1459-1480.10.1016/S1359-6454(97)00338-8 ↗
49. D.L. Olmsted, S.M. Foiles, E.A. Holm, Acta. Metall. Mater., 2009, vol. 57, pp. 3694-3703.10.1016/j.actamat.2009.04.007 ↗