Influence of Cr and Y Addition on Microstructure, Mechanical Properties, and Corrosion Resistance of SPSed Fe-Based Alloys
Source abstract
Abstract
Present work investigates the microstructural stability during spark plasma sintering (SPS) of Fe-Cr-Y alloys, its mechanical properties and corrosion behavior for its possible applications in nuclear power plant and petrochemical industries. The SPS was carried out for the Fe-7Cr-1Y and Fe-15Cr-1Y alloys at 800 °C, 900 °C, and 1000 °C due to their superior thermal stability as reported in Muthaiah et al. [Mater Charact 114:43–53, 2016]. Microstructural analysis through TEM and electron back scattered diffraction confirmed that the grain sizes of the sintered samples depicted a dual size grain distribution with >50 pct grains within a range of 200 nm and remaining grains in the range 200 nm to 2 µm. The best combination of hardness, wear resistance, and corrosion behavior was achieved for the samples sintered at 1000 °C. The high hardness (9.6 GPa), minimum coefficient of friction (0.25), and extremely low wear volume (0.00277 × 10−2 mm3) and low corrosion rate (3.43 mpy) are discussed in the light of solid solution strengthening, grain size strengthening, grain boundary segregation, excellent densification due to diffusion bonding, and precipitation hardening due to uniformly distributed nanosize Fe17Y2 phase in the alloy matrix. The SEM analysis of the worn surface and corroded features corroborated well with the wear resistance and corrosion behavior of the corresponding samples.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Metal Alloys Wear and Properties · Fusion materials and technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. N.R. Baddoo: J. Constr. Steel Res. (2008), vol.64, pp. 1199-1206.10.1016/j.jcsr.2008.07.011 ↗
2. K. Oha, S. Ohnuki, S. Yamashita, N. Akasaka, S. Ohtsuka, and H. Tanigawa: Mater. Trans. (2007), vol. 48, pp. 2563-2566.10.2320/matertrans.MD200715 ↗
3. D. Peckner, and I.M. Bernstein: Handbook of Stainless Steel, 2 nd ed., McGraw Hill Book Company, New York (1977), pp. 160-165.
4. A.A. Sorour, H.W. Strauss, R.R. Chromik, and M. Broch: Tribol. Lett. (2011), vol. 44, pp. 269-278.10.1007/s11249-011-9845-z ↗
5. R. Gupta, R.K. Singh Raman, and C.C. Koch: Mater. Sci. Eng. A. (2008), vol. 494, pp. 253-256.10.1016/j.msea.2008.04.019 ↗
6. G.E. Dieter: Mechanical Metallurgy, 2 nd ed., McGraw Hill Book Company, New York (1961), pp. 120-142.
7. M. Meyers, A. Mishra, and D. Benson: Prog. Mater. Sci. (2006), vol.51, pp.427-556.10.1016/j.pmatsci.2005.08.003 ↗
8. R. Valiev, R. Islamgaliev, and I. Alexandrov: Prog. Mater. Sci. (2000), vol.45, pp.103-189.10.1016/S0079-6425(99)00007-9 ↗
9. Z.A. Munir, U. Anselmi-Tamburini, and M. Ohyanagi: J. Mater. Sci. (2006), vol. 41 pp.763-777.10.1007/s10853-006-6555-2 ↗
10. C. Suryanarayana: Prog. Mater. Sci. (2011), vol. 46, pp. 1-84.10.1016/S0079-6425(99)00010-9 ↗
11. S.Mula, P.Sahani, S.K. Pratihar, S.Mal, and C.C. Koch: Mater. Sci. Eng. A. (2011), vol. 528, pp. 4348-4356.10.1016/j.msea.2011.03.040 ↗
12. Song AJ, Ma MZ, Zhou RZ, Wang L, Zhang WG, and Tan CL: Mater. Sci. Eng. A., (2012), vol. 538, pp. 219-23.10.1016/j.msea.2012.01.033 ↗
13. T.Sasaki, T.Ohkubo, and K.Hono: Acta Mater., (2009), vol. 573, pp. 529-3538.10.1016/j.actamat.2009.04.012 ↗
14. S. Libardi, M.Zadra, F.Casari, and A.Molinari: Mater. Sci. Eng. A., (2008), vol. 478, pp. 243-250.10.1016/j.msea.2007.05.111 ↗
15. I. Toor, J.Ahmed, M.A. Hussein, and N. Al-Aqeeli: Powder. Tech., (2016), vol. 299, pp. 62-70.10.1016/j.powtec.2016.05.041 ↗
16. J.R. Groza: Nanocrystalline powder consolidation methods, in: C.C. Koch (Ed.), Nanostructured Materials, Noyes publications, William Endrew publishers, New York, (2002), pp. 115-178.
17. R.W. Siegel: Mater. Sci. Forum., (1997), vol. 238, pp. 851-85.10.4028/www.scientific.net/MSF.235-238.851 ↗
18. M.B. Shongwe, S. Diouf, M.O. Durowoju, and P.A. Olubambi: J.Alloys & Comp., (2015), vol. 649, pp. 824-832.10.1016/j.jallcom.2015.07.223 ↗
19. D. Sebayang, D.S. Khaerudini, H. Saryanto, M.A. Othman, M. Husin Saleh, D. Fredrick, and P. Untoro: Appli. Mech. Mater., (2011), vol. 54, pp. 2197-2202.10.4028/www.scientific.net/AMM.52-54.2197 ↗
20. C. Suryanarayana and M.G. Norton: X-Ray Diffraction, 1 st ed., Plenum Publishing Corporation, New York, (1998).10.1007/978-1-4899-0148-4 ↗
21. B.D. Cullity and S.R. Stock: Elements of X-ray Diffraction, 3 rd ed., Prentice Hall, Upper Saddle River, NJ, London, (2001).
22. V.M.S.Muthaiah, L.H. Babu, C.C. Koch, and S. Mula: Mater. Character., (2016), vol. 114, pp. 43-53.10.1016/j.matchar.2016.02.005 ↗
23. M. Saber, W. Xu, L. Li, Y. Zhu, C.C. Koch and R.O. Scattergood, J. Nuc. Mater., (2014), vol.452, pp.223-229.10.1016/j.jnucmat.2014.05.014 ↗
24. W.Z. Xu, L.L. Li, M. Saber, C.C. Koch, Y.T. Zhu and R.O. Scattergood: Metall. Mater. Trans. A , (2015), vol. 46A. pp. 4394-4404.10.1007/s11661-015-2985-2 ↗
25. W.Z. Xu, L.L. Li, M. Saber, C.C. Koch, Y.T. Zhu and R.O. Scattergood: J. Nuc. Mater., (2014), vol.452, pp.434-439.10.1016/j.jnucmat.2014.05.067 ↗
26. J. Saenko: Phase Equilib. Diffus., (2017), vol.38, pp.684-699.10.1007/s11669-017-0574-3 ↗
27. M. Mihalkovic and M. Widom: Phys. Rev. B., (2004), vol.70, pp 144107.10.1103/PhysRevB.70.144107 ↗
28. K. Mandal, A. Yan, P. Kerschl, A. Handstein, O. Gutfleisch, and K.H. Muller: J. Phys. D Appl. Phys., (2004), vol.37(19), pp. 2628-2631.10.1088/0022-3727/37/19/002 ↗
29. S.B. Rybalka: Letter. mater., (2015), vol. 5(4), pp. 437-441.10.22226/2410-3535-2015-4-437-441 ↗
30. S. Pasebani and I.Charit: J.Alloys & Comp., (2014), vol. 599, pp. 206-211.10.1016/j.jallcom.2014.01.243 ↗
31. J.H. Schneibel and S. Shim: Mater. Sci. Eng. A., (2008), vol. 488, pp. 134-138.10.1016/j.msea.2007.10.074 ↗
32. K.A.Darling, B.K. VanLeeuwen, J.E. Semones, C.C. Koch, R.O. Scattergood, L.J. Kecskes and S.N. Mathaudhu: Mater. Sci. Eng. A., (2011), vol. 528, pp. 4365-4371.10.1016/j.msea.2011.02.080 ↗
33. M. Saber, H. Kotan, C.C. Koch and R.O. Scattergood: Mater. Sci. Eng. A., (2012), vol. 556, pp. 664-670.10.1016/j.msea.2012.07.045 ↗
34. L. Li, M. Saber, W. Xu, Y. Zhu, C.C.Koch and R.O. Scattergood: Mater. Sci. Eng. A., (2014), vol. 613, pp. 289-295.10.1016/j.msea.2014.06.099 ↗
35. S. Mula, S. Ghosh and S.K. Pabi: Powder Technol., (2009), vol.191, pp.176-181.10.1016/j.powtec.2008.10.002 ↗
36. A.P. Kumar, V.M.S. Muthaiah and S. Mula: J.Alloys & Comp., (2017), vol.722, pp. 617-627.10.1016/j.jallcom.2017.06.089 ↗
37. V.Mamedov: Powd. Metall., (2002), vol. 45, pp. 322-328.10.1179/003258902225007041 ↗
38. T.J. Goodwin, S.H. Yoo, P. Matteazzi, and J.R. Groza: Nanostruct. Mater., (1997), vol. 8, pp. 559-566.10.1016/S0965-9773(97)00194-3 ↗
39. M.Omori: Mater. Sci. Eng. A., (2000), vol. 287, pp. 183-188.10.1016/S0921-5093(00)00773-5 ↗
40. G.E. Fougere, J.R. Weertman, and R.W. Siegel: Nanostruct. Mater., (1995), vol. 5, pp. 127-134.10.1016/0965-9773(95)00021-6 ↗
41. R.S. Averback, H. Zhu, R. Tao, H.J. Hofler, and D.L. Bourell: Synthesis and Processing of Nanocrystalline Powder TMS, Warrendale, PA, (1996), pp. 203-216.
42. H. Zhu, and R.S. Averback: Mater. Manufact. Proc., (2007), vol. 11, pp. 905-923.10.1080/10426919608947541 ↗
43. H.W. Zhang, R. Gopalan, T. Mukai, and K. Hono: Scr. Mater., (2005), vol. 53, pp. 863-868.10.1016/j.scriptamat.2005.05.039 ↗
44. M.A. Hussein, C. Suryanarayana, A.M.Kumar, and N. Al-Aqeeli: Mater. Design., (2015), vol. 83, pp. 344-351.10.1016/j.matdes.2015.06.003 ↗
45. S. Mula, D. Setman, K. Youssef, R.O. Scattergood, and C.C. Koch: J. Alloys & Compd., (2015), vol. 627, pp. 108-116.10.1016/j.jallcom.2014.12.114 ↗
46. [47] H. Xuan and G. Cui: Ind. Lub. Tri., (2017), vol.69, pp.142-148,10.1108/ILT-10-2015-0159 ↗
47. M G. Fontena: Corrosion Eng., 3 rd ed., Tata McGraw-Hill Edition, (2005).
48. S. Guo, A. Chu, H. Wu, C. Cai, and Q. Xuanhui: J. Alloys & Compd., (2014), vol. 597, pp. 211-216.10.1016/j.jallcom.2014.01.087 ↗
49. J.Li, L.Yang, H. Ma, K. Jiang, C. Chang, J.Q. Wang, Z. Song, X.Wang, and R.W. Li: Mater. Des, (2016), vol.95, pp. 225-230.10.1016/j.matdes.2016.01.100 ↗
50. Z.M.Wang, Y.T. Ma, J. Zhang, W.L. Hou, X.C. Chang, and J.Q.Wang: Electrochimica. Acta., (2008), vol. 54, pp.261-269.10.1016/j.electacta.2008.08.017 ↗
51. Z.Li, C. Zhang, and L.Liu: J.Alloys & Compd., (2015), vol. 650, pp. 127-135.10.1016/j.jallcom.2015.07.256 ↗
52. J.F. Archard: J. Appl. Phys., (1953), vol. 24, pp. 981-988.10.1063/1.1721448 ↗
53. H.Cui, J.Guo, Y.Su, H.Ding, W.Bi, X.Li, and H.Fu: Mater. Sci. Eng. A., (2007), vol. 448, pp. 49-55.10.1016/j.msea.2006.09.068 ↗
54. L. Wang, and D.Y. Li: Wear., (2003), vol. 255, pp. 535-544.10.1016/S0043-1648(03)00057-7 ↗