Microstructure, Composition, and Impact Toughness Across the Fusion Line of High-Strength Bainitic Steel Weldments
Source abstract
Abstract
This paper analyzed the evolution of microstructure, composition, and impact toughness across the fusion line of high-strength bainitic steel weldments with different heat inputs. The main purpose was to develop a convenient method to evaluate the HAZ toughness quickly. The compositions of HAZ were insensitive to higher contents of alloy elements (e.g., Ni, Mo) in the weld metal because their diffusion distance is very short into the HAZ. The weld metal contained predominantly acicular ferrite at any a heat input, whereas the main microstructures in the HAZ changed from lath martensite/bainite to upper bainite with the increasing heat input. The evolution of HAZ toughness in relation to microstructural changes can be revealed clearly combined with the impact load curve and fracture morphology, although the results of impact tests do not show an obvious change with heat input because the position of Charpy V notch contains the weld metal, HAZ as well as a part of base metal. As a result, based on the bead-on-plate welding tests, the welding parameter affecting the HAZ toughness can be evaluated rapidly.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. K. Nishioka and K. Ichikawa: Sci. Technol. Adv. Mater., 2012, vol. 13, pp. 1-21.
2. P.S. Bandyopadhyay, S.K. Ghosh, S. Kundu, and S. Chatterjee: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 2742-2752.10.1007/s11661-011-0711-2 ↗
3. S.S. Babu: Sci. Technol. Weld. Join., 2011, vol. 16, pp. 306-312.10.1179/1362171811Y.0000000019 ↗
4. J.C. Ion, K.E. Easterling, and M.F. Ashby: Acta Metall., 1984, vol. 32, pp. 1949-1962.10.1016/0001-6160(84)90176-7 ↗
5. D.M. Viano, N.U. Ahmed, and G.O. Schumann: Sci. Technol. Weld. Join., 2000, vol. 5, pp. 26-34.10.1179/stw.2000.5.1.26 ↗
6. J. Moon, C.H. Lee, T.H. Lee, and H.C. Kim: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 156-163.10.1007/s11661-014-2623-4 ↗
7. L.Y. Lan, C.L. Qiu, D.W. Zhao, X.H. Gao, and L.X. Du: Mater. Sci. Eng. A, 2011, vol. 529, pp. 192-200.10.1016/j.msea.2011.09.017 ↗
8. K. Easterling: Introduction to the Physical Metallurgy of Welding, Butterworth-Heinemann, London, 1992, pp. 261-263.
9. N. Yurioka and H. Suzuki: Int. Mater. Rev., 1990, vol. 35, pp. 217-249.10.1179/imr.1990.35.1.217 ↗
10. T. Kasuya, N. Yurioka, and M. Okumura: Nippon Steel Tech. Rep., 1995, vol. 65, pp. 7-14.
11. R. Kurji and N. Coniglio: Int. J. Adv. Manuf. Technol., 2015, vol. 77, pp. 1581-1597.10.1007/s00170-014-6555-3 ↗
12. Y. You, C.J. Shang, W.J. Nie, and S. Subramanian: Mater. Sci. Eng. A, 2012, vol. 558, pp. 692-701.10.1016/j.msea.2012.08.077 ↗
13. R. Cao, J. Li, D.S. Liu, J.Y. Ma, and J.H. Chen: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 2999-3015.10.1007/s11661-015-2916-2 ↗
14. A. Lambert-Perlade, A.F. Gourgues, and A. Pineau: Acta Mater., 2004, vol. 52, pp. 2337-2348.10.1016/j.actamat.2004.01.025 ↗
15. H. Terasaki, Y. Shintome, Y.I. Komizo M. Ohata, K. Moriguchi, and Y. Tomio: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 2035-2039.10.1007/s11661-015-2817-4 ↗
16. P.L. Harrison and R.A. Farrar: Int. Mater. Rev., 1989, vol. 34, pp. 35-51.10.1179/imr.1989.34.1.35 ↗
17. J.A. Gianetto, J.E.M. Braid, J.T. Bowker, and W.R. Tyson: Trans. ASME, 1997, vol. 119, pp. 134-144.
18. J. Jang, J.S. Lee, J.B. Ju, B.W. Lee, D. Kwon, and W.S. Kim: Mater. Sci. Eng. A, 2003, vol. 351, pp. 183-189.10.1016/S0921-5093(02)00850-X ↗
19. ASTM E23-05. Standard Test Methods for Notched Bar Impact Testing of Metallic Materials, Annual Book of ASTM Standards, vol. 03.01, ASTM International, Pennsylvania, USA, 2005.
20. S. Karaoglu and A. Secgin: J. Mater. Proces. Technol., 2008, vol. 202, pp. 500-507.10.1016/j.jmatprotec.2007.10.035 ↗
21. Gunaraj V and Murugan N. (2002) Weld. J. 81:45.
22. I.S. Kim, K.J. Son, Y.S. Yang, and P.K.D.V. Yaragada: Int. J. Mach. Tools Manuf., 2003, vol. 43, pp. 763-769.10.1016/S0890-6955(03)00054-3 ↗
23. S. Kou: Welding Metallurgy, A John Wiley & Sons, Inc., Publication, 2003, pp. 179-189.
24. J.L. Caron, S.S. Babu, and J.C. Lippold: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 4015-4031.10.1007/s11661-011-0801-1 ↗
25. L.Y. Lan, C.L. Qiu, D.W. Zhao, X.H. Gao, and L.X. Du: Sci. Technol. Weld. Join., 2012, vol. 17, pp. 564-570.10.1179/1362171812Y.0000000048 ↗
26. J.A. Gianetto, N.J. Smith, J.T. Mcgrath, and J.T. Bowker: Weld. Res. Sup., 1992, vol. 11, pp. 407s-419s.
27. A. Takada, Y.I. Komizo, H. Terasaki, T. Yokota, K.J. Oi, and K. Yasuda: Weld. J., 2015, vol. 29, pp. 254-261.10.1080/09507116.2014.921042 ↗
28. S. Godet, J.C. Glez, Y. He, J.J. Jonas, and P.J. Jacques: J. Applied Crystal., 2004, vol. 37, pp. 417-425.10.1107/S0021889804007320 ↗
29. H. Kitahara, R. Ueji, N. Tsuji, and Y. Minamino: Acta Mater., 2006, vol. 54, pp.1279-1288.10.1016/j.actamat.2005.11.001 ↗
30. M. Abbasi, T.W. Nelson, and C.D. Sorensen: J. Appl. Crystallogr., 2013, vol. 46, pp. 716-725.10.1107/S0021889813008522 ↗
31. L.Y. Lan, X.W. Kong, and C.L. Qiu: Mater. Charact., 2015, vol. 105, pp. 95-103.10.1016/j.matchar.2015.05.010 ↗
32. R.H. Van Stone, T.B. Cox, J.R. Low, and Jr, J.A. Psioda: Int. Mater. Rev., 1985, vol. 30, pp.157-179.10.1179/imr.1985.30.1.157 ↗
33. L. Aucott, S.W. Wen, and H. Dong: Mater. Sci. Eng. A, 2015, vol. 622, pp.194-203.10.1016/j.msea.2014.10.057 ↗
34. L.Y. Lan, X.W. Kong, C.L. Qiu, and D.W. Zhao: Mater. Des., 2016, vol. 90, pp. 488-498.10.1016/j.matdes.2015.10.158 ↗