Effect of Tungsten on Long-Term Microstructural Evolution and Impression Creep Behavior of 9Cr Reduced Activation Ferritic/Martensitic Steel
Source abstract
Abstract
The present study describes the changes in the creep properties associated with microstructural evolution during thermal exposures to near service temperatures in indigenously developed reduced activation ferritic-martensitic steels with varying tungsten (1 and 1.4 wt pct W) contents. The creep behavior has been studied employing impression creep (IC) test, and the changes in impression creep behavior with tungsten content have been correlated with the observed microstructures. The results of IC test showed that an increase in 0.4 pct W decreases the creep rate to nearly half the value. Creep strength of 1.4 pct W steel showed an increase in steels aged for short durations which decreased as aging time increased. The microstructural changes include coarsening of precipitates, reduction in dislocation density, changes in microchemistry, and formation of new phases. The formation of various phases and their volume fractions have been predicted using the JMatPro software for the two steels and validated by experimental methods. Detailed transmission electron microscopy analysis shows coarsening of precipitates and formation of a discontinuous network of Laves phase in 1.4 W steel aged for 10,000 hours at 823 K (550 °C) which is in agreement with the JMatPro simulation results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. R.L. Klueh and D.R. Harries: High-Chromium Ferritic and Martensitic Steels for Nuclear Applications, ed. ASTM. vol. ASTM MONO3. 2001.10.1520/MONO3-EB ↗
2. M. Tamura, K. Shinozuka, K. Masamura, K. Ishizawa, S. Sugimoto, J. Nucl. Mater., 1998, vols. 258–263, Part 2: pp. 1158-1162.10.1016/S0022-3115(98)00151-2 ↗
3. C.R. Brinkman, B. Gieseke, and P.J. Maziasz: The influence of long term thermal aging on the microstructure and mechanical properties of modified 9Cr-1Mo steel, in Microstructures and Mechanical Properties of Aging Material, R. Viswanathan, P.K. Liaw, K.L. Murty, E.P. Simonen and D. Frear, Editor. 1993, The Minerals, Metals & Materials Society, Orlando, pp. 107-116.
4. S. Saroja, M. Vijayalakshmi, and V.S. Raghunathan: Mater.Trans. JIM, 1993. vol. 34 (10), p. 901.10.2320/matertrans1989.34.901 ↗
5. F. Abe: Metall. Mater. Trans. A, 2005, vol. 36 (2), pp. 321-332.10.1007/s11661-005-0305-y ↗
6. S.G. Hong, W.B. Lee, and C.G. Park: J. Nuc. Mater., 2001, vol. 288, pp. 202-207.10.1016/S0022-3115(00)00558-4 ↗
7. J. Cermak., J. Kucera, B. Million, J Krumpos: Kov. Mater., 1980, vol. 18, p. 537.
8. R. Mythili, Ravikirana, J. Vanaja, K. Laha, S. Saroja, T. Jayakumar, M. D. Mathew, E. Rajendrakumar: Proc. Eng, 2013, vol. 55, pp. 295-299.10.1016/j.proeng.2013.03.257 ↗
9. L. J. Seung, A. H. Ghassemi, M. Kouichi, M. Taro, A. Hitoshi: Mater. Sci. Eng. A, 2006, vol. 428 (1–2), pp. 270-275.
10. C.G. Panait, W. Bendick, A. Fuchsmann, A. F. Gourgues-Lorenzon, J.Besson: Int. J. Pressure Vessels Piping, 2010, vol. 87(6), pp. 326-335.
11. K. Laha, S. Saroja, A. Moitra, R. Sandhya, M.D.Mathew, T. Jayakumar, E. Rajendrakumar: J. Nucl. Mater., 2013, vol. 439: pp. 41–50.10.1016/j.jnucmat.2013.03.073 ↗
12. F. Abe: Mater. Sci. Eng., 2004. 387-389: p. 565-569.10.1016/j.msea.2004.01.057 ↗
13. R. Lindau, M.Schirra: Fusion Eng. Des., 2001. 58-59(0): p. 781-785.10.1016/S0920-3796(01)00562-2 ↗
14. T. Hasegawa, Y.R. Abe, Y. Tomita, N.Maruyama., M. Sugiyama: ISIJ International, 2001. 41(8): p. 922-929.10.2355/isijinternational.41.922 ↗
15. T. Mukherjee, W.E. Stumpf and C.M. Sellars: J. Mater. Sci., 1968, vol. 3(2), pp. 127-135.10.1007/BF00585479 ↗
16. U. R. Kattner: JOM, 1997, vol. 49 (12), pp. 14-19.10.1007/s11837-997-0024-5 ↗
17. H.L. Lukas, J. Weiss, and E.-T. Henig: CALPHAD, 1982, vol. 6, pp. 229-251.10.1016/0364-5916(82)90004-9 ↗
18. Naveena, V.D., Vijayanand, V. Ganesan, K. Laha, M. D. Mathew: Mater. Sci. Technol., 2014, vol. 30 (10): pp. 1223-1228.10.1179/1743284713Y.0000000438 ↗
19. V. Thomas Paul, C. Sudha, S. Saroja: Metall. Mater. Trans. A, 2015, vol. 46 (8), pp. 3378-3392.10.1007/s11661-015-2954-9 ↗
20. J. Hald: Steel Res., 1996, vol. 67 (9), pp. 369-374.10.1002/srin.199605503 ↗
21. F. Abe, H. Araki, and T. Noda: Metall.Mater. Trans A, 1991, vol. 22 (10): pp. 2225-2235.10.1007/BF02664988 ↗
22. S. Ghosh: J. Mater. Sci., 2010, vol. 45 (7), pp. 1823-1829.10.1007/s10853-009-4165-5 ↗
23. Y. Hosoi, N. Wade, S. Kunimitsu, T. Urita: J. Nucl. Mater., 1986, vols. 141–143, pp. 461-467.10.1016/S0022-3115(86)80083-6 ↗
24. G. Dimmler, P. Weinert, E. Kozeschnik, H. Cerjak: Mater. Charact., 2003, vol. 51 (5), pp. 341-352.10.1016/j.matchar.2004.02.003 ↗
25. L. Korcakova, J. Hald, M.A.J. Somers: Mater. Charact., 2001, vol. 47 (2), pp. 111-117.10.1016/S1044-5803(01)00159-0 ↗
26. A.W. Bowen, G.M. Leak: Metall. Trans. A, 1970, vol. 1 (6), pp. 1695-1700.10.1007/BF02642019 ↗
27. K. Sawada, M. Takeda, K. Maruyama, R. Ishii, M. Yamada, Y. Nagae, R. Komine: Mater. Sci. and Eng. A, 1999, vol. 267 (1), pp. 19-25.10.1016/S0921-5093(99)00066-0 ↗
28. F. Abe: Mater. Sci. Eng. A, 2001, vols. 319–321, pp. 770-773.10.1016/S0921-5093(00)02002-5 ↗
29. M. Yoshinori, K. Toshiyuki, M. Masahiko, M. Toru: ISIJ Int., 2002, vol. 42 (12), pp. 1423-1429.10.2355/isijinternational.42.1423 ↗
30. J. Hald, L. Korcakova: ISIJ Int., 2003, vol. 43 (3), pp. 420-427.10.2355/isijinternational.43.420 ↗
31. T. Sawai, K. Shiba, A. Hishinuma: J. Nucl. Mater., 2000, vols. 283–287, pp. 657-661.10.1016/S0022-3115(00)00089-1 ↗