journal article·2016-12

Impact Toughness Properties of Nickel- and Manganese-Free High Nitrogen Austenitic Stainless Steels

Roghayeh Mohammadzadeh, Alireza Akbari, Mina Mohammadzadeh

Publisher page

Abstract

A large amount of manganese (>10 wt pct) in nickel-free high nitrogen austenitic stainless steels (Ni-free HNASSs) can induce toxicity. In order to develop Ni-free HNASSs with low or no manganese, it is necessary to investigate their mechanical properties for biomedical applications. This work aims to study the Charpy V-notch (CVN) impact toughness properties of a Ni- and Mn-free Fe-22.7Cr-2.4Mo-1.2N HNASS plate in the temperature range of 103 K to 423 K (–170 °C to 150 °C). The results show that unlike conventional AISI 316L austenitic stainless steel, the Ni- and Mn-free HNASS exhibits a sharp ductile-to-brittle transition (DBT). The intergranular brittle fracture associated with some plasticity and deformation bands is observed on the fracture surface at 298 K (25 °C). Electron backscattered diffraction (EBSD) analysis of the impact-tested sample in the longitudinal direction indicates that deformation bands are parallel to {111} slip planes. By decreasing the temperature to 273 K, 263 K, and 103 K (0 °C, –10 °C, and –70 °C), entirely intergranular brittle fracture occurs on the fracture surface. The fracture mode changes from brittle fracture to ductile as the temperature increases to 423 K (150 °C). The decrease in impact toughness is discussed on the basis of temperature sensitivity of plastic flow and planarity of deformation mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. V.G. Gavriljuk and H. Berns: High Nitrogen Steels—Structure, Properties, Applications, Springer, Berlin, 1999, p. 135.10.1007/978-3-662-03760-7_3 ↗
2. R. Presser and J.M. Silcock: Met. Sci., 1983, vol. 17, pp. 241–47.10.1179/030634583790420871 ↗
3. A.H. Bott, F.B. Pickering, and G.J. Butterworth: J. Nucl. Mater., 1986, vols. 141–143, pp. 1088–96.10.1016/0022-3115(86)90147-9 ↗
4. S. Degallaix, J. Foct, and A. Hendry: Mater. Sci. Technol., 1986, vol. 2, pp. 946–50.10.1179/mst.1986.2.9.946 ↗
5. G. Stein, I. Hucklenbroich, and M. Wagner: Mater. Sci. Forum, 1999, vols. 318–320, pp. 167–74.10.4028/www.scientific.net/MSF.318-320.167 ↗
6. G. Stein, I. Hucklenbroich, and H. Feichtinger: Mater. Sci. Forum, 1999, vols. 318–320, pp. 261–70.
7. D.J. Gawkrodger: Contact Derm., 1996, vol. 35 (5), pp. 267–71.10.1111/j.1600-0536.1996.tb02386.x ↗
8. T.P. Coogan, D.M. Latta, E.T. Snow, and M. Costa: CRC Cr. Rev. Toxicol., 1989, vol. 19 (4), pp. 341–84.10.3109/10408448909029327 ↗
9. M. Cramers and U. Lucht: Acta Orthop. Scand., 1977, vol. 48, pp. 245–49.10.3109/17453677708988763 ↗
10. C.L. Kelin, P. Nieder, M. Wanger, H. Kohler, F. Bittingerr, C.J. Kirkpatrick, and J.C. Lewis: J. Mater. Sci.: Mater. Med., 1994, vol. 5, pp. 798–807.10.1007/BF00213138 ↗
11. P.J. Uggowitzer, R. Magdowski, and M.O. Speidel: ISIJ Int., 1996, vol. 36, pp. 901–08.10.2355/isijinternational.36.901 ↗
12. M. Sumita, T. Hanawa, and S.H. Teoh: Mater. Sci. Eng., C, 2004, vol. 24, pp. 753–60.10.1016/j.msec.2004.08.030 ↗
13. M. Talha, C.K. Behera, and O.P. Sinha: Mater. Sci. Eng., C, 2013, vol. 33, pp. 3563–75.10.1016/j.msec.2013.06.002 ↗
14. R.J. Brigham and E.W. Tozer: Corrosion, 1976, vol. 32 (7), pp. 274–77.10.5006/0010-9312-32.7.274 ↗
15. E. Lunarska, Z. Szklarska-Smialowska, and M. Janik-Czachor: Corrosion, 1975, vol. 31 (7), pp. 231–34.10.5006/0010-9312-31.7.231 ↗
16. H. Baba, T. Kodama, and Y. Katada: Corros. Sci., 2002, vol. 44, pp. 2393–2407.10.1016/S0010-938X(02)00040-9 ↗
17. Y.S. Lim, J.S. Kim, S.J. Ahn, H.S Kwona, and Y. Katada: Corros. Sci., 2001, vol. 43, pp. 53–61.10.1016/S0010-938X(00)00074-3 ↗
18. I. Toor: J. Chem., 2014, vol. 2014, pp. 1–8.10.1155/2014/951471 ↗
19. H. Li, Z. Jiang, Z. Zhang, and Y. Yang: J. Iron Steel Res. Int., 2009, vol. 16 (1), pp. 58–61.10.1016/S1006-706X(09)60011-X ↗
20. N. Maruyama, M. Sanbe, Y. Katada, and K. Kanazawa: Mater. Trans., 2009, vol. 50 (11), pp. 2615–22.10.2320/matertrans.M2009216 ↗
21. X. Wu, Y. Fu, J. Huang, E. Han, W. Ke, K. Yang, and Z. Jiang: J. Mater. Eng. Perform., 2009, vol. 18 (3), pp. 287–98.10.1007/s11665-008-9295-4 ↗
22. L. Montanaro, M. Cervellati, D. Campoccia, and C.R. Arciola: J. Mater. Sci.: Mater. Med., 2006, vol. 17, pp. 267–75.10.1007/s10856-006-7313-3 ↗
23. P. Saravanan and V.S. Raja: Int. J. Mater. Phys. Chem., 2015, vol. 1 (2), pp. 212–19.
24. D. Kuroda, T. Hanawa, T. Hibarua, and T. Kobayashi: Mater. Trans., 2003, vol. 44 (3), pp. 414–20.10.2320/matertrans.44.414 ↗
25. R. Mohammadzadeh and A. Akbari: Mater. Sci. Eng., A, 2014, vol. 592, pp. 153–63.10.1016/j.msea.2013.10.103 ↗
26. R. Mohammadzadeh and A. Akbari: Mater. Charact., 2014, vol. 93, pp. 119–28.10.1016/j.matchar.2014.04.001 ↗
27. A. Akbari and R. Mohammadzadeh: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 1570–79.10.1007/s11661-015-2751-5 ↗
28. B.D. Cullity: Elements of X-Ray Diffraction, Addison-Wesley Publishing Company, Inc., MA, 1956, p. 338.
29. R.L. Tobler and D. Meyn: Metall. Trans. A, 1988, vol. 19A, pp. 1626–31.10.1007/BF02674040 ↗
30. P. Müllner, C. Solenthaler, P.J. Uggowitzer, and M.O. Speidel: Acta Metall. Mater., 1994, vol. 42, pp. 2211–17.10.1016/0956-7151(94)90300-X ↗
31. P. Müllner: Mater. Sci. Eng., A, 1997, vols. 234–236, pp. 94–97.10.1016/S0921-5093(97)00196-2 ↗
32. Y. Tomota, J. Nakano, Y. Xia, and K. Inoue: Acta Mater., 1998, vol. 46, pp. 3099–3108.10.1016/S1359-6454(98)00005-6 ↗
33. Y. Tomota, Y. Xia, and K. Inoue: Acta Mater., 1998, vol. 46, pp. 1577–8710.1016/S1359-6454(97)00350-9 ↗
34. S.C. Liu, T. Hashida, H. Takashi, H. Kuwano, and Y. Hamaguchi: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 791–98.10.1007/s11661-998-0270-3 ↗
35. W. Wang, S. Wang, K. Yang, and Y. Shan: Mater. Des., 2009, vol. 30, pp. 1822–24.10.1016/j.matdes.2008.08.009 ↗
36. Y. Tomota and S. Endo: ISIJ Int., 1990, vol. 30, pp. 656–62.10.2355/isijinternational.30.656 ↗
37. M. Tanaka, T. Onomoto, T. Tsuchiyama, and K. Higashida: ISIJ Int., 2012, vol. 52, pp. 915–2110.2355/isijinternational.52.915 ↗
38. D.A. Canonico, W.J. Stelzman, R.C. Bercgren, and R.K. Nanstad: Weld. Res. Suppl., 1981, pp. 85–91.
39. A.C.T.M. Van Zwieten and J.H. Bulloch: Int. J. Pres. Ves. Piping, 1993, vol. 56, pp. 1–31.10.1016/0308-0161(93)90114-9 ↗
40. M.O. Speidel and M. Zheng-Cui: 2003–High Nitrogen Steels, M.O. Speidel, C. Kowanda, and M. Diener, eds., HNS Schaffhausen, Switzerland, Institute of Metallurgy ETH Zürich, Zürich, 2003, pp. 63–73.
41. G.E. Dieter: Mechanical Metallurgy, 3rd ed., McGraw-Hill, New York, NY, 1986, p. 477.
42. R.W. Hertzberg: Deformation and Fracture Mechanics of Engineering Materials, 3rd ed., Wiley, New York, NY, 1989, p. 263.
43. M.A. Meyer and K.K. Chawla: Mechanical Behavior of Materials, Prentice Hall, NJ, 1998.
44. K.J. lrvine, T. Gladman, and P.B. Pickering: J. Iron Steel Inst., 1969, vol. 199, pp. 1017–28.
45. R.L. Fleischer: in The Strengthening of Metals, D. Peckner, ed., Reinhold Publ. Co., New York, NY, 1964, p. 93.
46. V.G. Gavriljuk: ISIJ Int., 1996, vol. 36 (7), pp. 738–45.10.2355/isijinternational.36.738 ↗
47. M.L.G. Byrnes, M. Grujicic, and W.S. Owen: Acta Metall., 1987, vol. 35 (7), pp. 1853–62.10.1016/0001-6160(87)90131-3 ↗
48. W.S. Owen: Int. Conf. High Nitrogen Steels, Stahl & Eisen, Aachen, Germany, 1990, p. 42.
49. M. Byrnes, M. Grujicic, and S. Owen: Acta Metall., 1987, vol. 35, pp. 1853–62.10.1016/0001-6160(87)90131-3 ↗
50. M. Grujicic and W.S. Owen: Acta Metall. Mater., 1995, vol. 43, pp. 4201–11.10.1016/0956-7151(95)00107-7 ↗
51. F. Pickering: Physical Metallurgical Development of Stainless Steels, Proc. Conf. Stainless Steels, Institute of Metals, London, 1985, p. 2.