journal article·2016-09

Mg Content Dependence of EML-PVD Zn-Mg Coating Adhesion on Steel Strip

Woo Sung Jung, Chang Wook Lee, Tae Yeob Kim, Bruno C. De Cooman

Publisher page

Abstract

The effect of coating thickness and Mg concentration on the adhesion strength of electromagnetic levitation physical vapor deposited Zn-Mg alloy coatings on steel strip was investigated. The phase fraction of Zn, Mg2Zn11, and MgZn2 was determined for a coating Mg concentration in the 0 to 15 wt pct range. Coatings with a Mg content less than 5 pct consisted of an Zn and Mg2Zn11 phase mixture. The coatings showed good adhesion strength and ductile fracture behavior. Coatings with a higher Mg concentration, which consisted of a Mg2Zn11 and MgZn2 phase mixture, had a poor adhesion strength and a brittle fracture behavior. The adhesion strength of PVD Zn-Mg alloy coatings was found to be related to the pure Zn phase fraction. The effect of coating thickness on adhesion strength was found to be negligible. The microstructure of the interface between steel and Zn-Mg alloy coatings was investigated in detail by electron microscopy, electron diffraction, and atom probe tomography.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Corrosion Behavior and Inhibition · Magnesium Alloys: Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Worldsteel Association-Steel Statistical Yearbook. https://www.worldsteel.org/dms/internetDocumentList/bookshop/2015/Steel-Statistical-Yearbook-2015/document/Steel%20Statistical%20Yearbook%202015.pdf (2015).
2. J. Elvins, J.A. Spittle, J.H. Sullivan, and D.A. Worsely: Corros. Sci., 2008, vol. 50, pp. 1650–58.10.1016/j.corsci.2008.02.005 ↗
3. S. Schuerz, M. Fleischanderl, G.H. Luckeneder, K. Preis, T. Haunschmied, G. Mori, and A.C. Kneissle: Corros. Sci., 2009, vol. 51, pp. 2355–63.10.1016/j.corsci.2009.06.019 ↗
4. Y. Kimata, A. Takahashi, and K. Asai: Proceedings Galvatech 2007, Osaka, Japan, 2007, pp. 586–91.
5. S. Yamamoto, F. Katoh, M. Taomoto, and H. Entani: Proceedings of the Galvatech 2007, Osaka, Japan, 2007, pp. 659–64.
6. Y. Morimoto, K. Honda, K. Nishimura, S. Tanaka, A. Takahashi, H. Shindo, and M. Kurosaki: Nippon Steel Technical Report No. 87, 2003.
7. T. Shimizu, A. Andoh, H. Asada, and S. Morikawa: SAE Technical Paper, No. 2005-01-1330, 2005, pp. 91–99.
8. J. Sommer, W. Warnecke, E. Nabbefeld-Arnold, and B. Osburg: Proceedings of the 2nd International Conference on Steel in Cars and Trucks 2008, Wiebaden, Deutschland, 2008.
9. M. Vlot, R. Bleeker, T. Maalman, and E. van Perlstein: Proceedings of the Galvanized Steel Sheet Forum, ILZRO and IZA, Dusseldorf, 2006, pp. 13–24.
10. M.S. Oh, S.H. Kim, S.Y. Kim, T.C. Kim, and J.S. Kim: Proceeding of the METAL 2014, Brno, 2014.
11. T. Ishikawa, M. Ueda, K. Kandori, and T. Nakayama: Corros. Sci., 2007, vol. 49, pp. 2547–56.10.1016/j.corsci.2006.12.008 ↗
12. T. Prosek, D. Thierry, C. Taxen, and J. Maizner: Corros. Sci., 2007, vol. 49, pp. 2676–93.10.1016/j.corsci.2006.11.004 ↗
13. J. Kawafuku, J. Katoh, M. Toyama, K. Ikeda, H. Nishimoto, and H. Satoh: SAE Technical Paper, No. 912272, 1991, pp. 43–50.
14. B. Schuhmacher, C. Schwerdt, U. Seyfert, and O. Zimmer: Surf. Coat. Technol., 2003, vol. 163–164, pp. 703–09.10.1016/S0257-8972(02)00660-6 ↗
15. N.C. Hosking, M.A. Strom, P.H. Shipway, and C.D. Rudd: Corros. Sci., 2007, vol. 49, pp. 3669–95.10.1016/j.corsci.2007.03.032 ↗
16. T. Prosek, A. Nazarov, U. Bexell, D. Thierry, J. Serak, Corros. Sci., 2007, vol. 50, pp. 2216–31.10.1016/j.corsci.2008.06.008 ↗
17. F.C. Porter: Corrosion Resistance of Zinc and Zinc Alloys, CRC Press, Boca Raton, 1994.10.1201/9781482293524 ↗
18. H. Hayashi, and T. Nakagawa: J. Mater. Process. Technol., 1994, vol. 46, pp. 455–87.10.1016/0924-0136(94)90128-7 ↗
19. M. Ye, J.L. Delplancke, G. Berton, L. Segers, and R. Winand: Surf. Coat. Technol., 1998, vol. 105, pp. 184–88.10.1016/S0257-8972(98)00490-3 ↗
20. G.M. Song, and W.G. Sloof: Surf. Coat. Technol., 2011, vol. 205, pp. 4632–39.10.1016/j.surfcoat.2011.04.014 ↗
21. L. Baptiste, N. van Landschoot, G. Gleijm, J. Priede, J.S. van Westrum, H. Velthuis, and T.Y. Kim: Surf. Coat. Technol., 2007, vol. 202, pp. 1189–93.10.1016/j.surfcoat.2007.05.075 ↗
22. T.Y. Kim, and M. Goodenough: Corros. Sci. Technol., 2011, vol. 10, pp. 194–98.
23. I. Hertveldt, B.C. De Cooman, K. Meseure, and C. Xhoffer: ISIJ Int., 1999, vol. 12, pp. 1280–88.10.2355/isijinternational.39.1280 ↗
24. A.R. Marder: Prog. Mater. Sci., 2000, vol. 45, pp. 191–271.10.1016/S0079-6425(98)00006-1 ↗
25. M. Oring: The Materials Science of Thin Films, Academic Press, Boston, 1992.
26. Z. Liu, D. Qiu, F. Wang, J.A. Taylor, and M. Zhang: Mater. Charact., 2015, vol. 106, pp. 1–10.10.1016/j.matchar.2015.05.011 ↗
27. M.H. Lee, I. Bae, Y.J. Kwak, and K.M. Moon: Curr. Appl. Phys., 2012, vol. 12, pp. 52–56.
28. C. Yao, W. Chen, and W. Gao: Surf. Coat. Technol., 2013, vol. 219, pp. 126–30.10.1016/j.surfcoat.2013.01.015 ↗
29. J.A. Nairn, and S.R. Kim: Eng. Fract. Mech., 1992, vol. 42, pp. 195–208.10.1016/0013-7944(92)90291-L ↗
30. S.R. Kim, and J.A. Nairn: Eng. Fract. Mech., 2000, vol. 65, pp. 595–607.10.1016/S0013-7944(99)00142-3 ↗
31. T.R. Hull, J.S. Colligon, and A.E. Hill: Vacuum, 1987, vol. 37, pp. 327–30.10.1016/0042-207X(87)90018-2 ↗
32. T. Nakamori, Y. Adachi, M. Arai, and A. Shibuya: ISIJ Int., 1995, vol. 35, pp. 1494–1501.10.2355/isijinternational.35.1494 ↗
33. E. Diler, S. Rioual, B. Lescop, D. Thierry, and B. Rouvellou: Corros. Sci., 2012, vol. 65, pp. 178–86.10.1016/j.corsci.2012.08.014 ↗
34. Y.P. Xie, Z.Y. Wang, and Z.F. Hou: Scr. Mater., 2013, vol. 68, pp. 495–98.10.1016/j.scriptamat.2012.11.034 ↗