journal article·2004-09

Study of the Ni41.3Ti38.7Nb20 wide transformation hysteresis shape-memory alloy

Xiang-Mingh He, Li-Jian Rong, Yi-Yi Li, De-Sheng Yan, Zhi-Min Jiang

Publisher page

Abstract

The shape-memory characteristics in the Ni41.3Ti38.7Nb20 alloy have been investigated by means of cryogenic tensile tests and differential scanning calorimetry measurement. The martensite start temperature M s could be adjusted to around the liquid nitrogen temperature by controlling the cooling condition. The reverse transformation start temperature A′ s rose to about 70 °C after the specimens were deformed to 16 pct at different temperatures, where the initial states of the specimens were pure austenite phase, martensite phase, or duplex phase. The shape-memory effect and the reverse transformation temperatures were studied on the specimens deformed at (M s +30 °C). It was found that once the specimens deformed to 16 pct, a transformation hysteresis width around 200 °C could be attained and the shape recovery ratio could remain at about 50 pct. The Ni41.3Ti38.7Nb20 alloy is a promising candidate for the cryogenic engineering applications around the liquid nitrogen temperature. The experimental results also indicated that the transformation temperature interval of the stress-induced martensite is smaller by about one order of magnitude than that of the thermal-induced martensite.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. K. Otsuka and C.M. Wayman: Shape Memory Materials, Cambridge University Press, Cambridge, United Kingdom, 1998, pp. 27–36.
2. S. Miyazaki, K. Otsuka, and Y. Suzuki: Scripta Metall., 1981, vol. 15, pp. 287–92.10.1016/0036-9748(81)90346-X ↗
3. S. Miyazaki, T. Imai, Y. Igo, and K. Otsuka: Metall. Trans. A, 1986, vol. 17A, pp. 115–20.10.1007/BF02644447 ↗
4. K. Otsuka and K. Shimizu: Int. Met. Rev., 1986, vol. 31, pp. 93–114.10.1179/imr.1986.31.1.93 ↗
5. R.D. James and K.F. Hane: Acta Mater., 2000, vol. 48, pp. 197–222.10.1016/S1359-6454(99)00295-5 ↗
6. M. Piao, S. Miyazaki, and K. Otsuka: Mater. Trans. JIM, 1992, vol. 33, pp. 346–53.10.2320/matertrans1989.33.346 ↗
7. X. Ren, and K. Otsuka: Mater. Sci. Forum, 2000, vols. 327–328, pp. 429–32.10.4028/www.scientific.net/MSF.327-328.429 ↗
8. X.M. He, L.J. Rong, D.S. Yan, and Y.Y. Li: Mater. Sci. Eng. A, 2004, vol. 371, pp. 193–97.10.1016/j.msea.2003.11.044 ↗
9. S. Miyazaki and K. Otsuka: Metall. Trans. A, 1986, vol. 17A, pp. 53–63.10.1007/BF02644442 ↗
10. S.K. Wu, H.C. Lin, and T.S. Chou: Acta Metall. Mater., 1990, vol. 38, pp. 95–102.10.1016/0956-7151(90)90137-6 ↗
11. M. Nishida, C.M. Wayman, and T. Honma: Metall. Trans. A, 1986, vol. 17A, pp. 1505–15.10.1007/BF02650086 ↗
12. K.N. Melton, J. Simpson, and T.W. Duerig: Proc. Int. Conf. on Martensitic Transformations, Nara, Japan, 1986, pp. 1053–58.
13. K.N. Melton, J.L. Proft, and T.W. Duerig: Proc. MRS Int. Meeting on Advanced Materials, Tokyo, 1989, p. 165–70.
14. Y.F. Zheng, W. Cai, Y.Q. Wang, Y.C. Luo, and L.C. Zhao: J. Mater. Sci. Technol., 1998, vol. 14, pp. 37–40.
15. X.M. He, D.S. Yan, L.J. Rong, and Y.Y. Li: Proc. Advances in Cryogenics Engineering (Materials), Anchorage, AK, Sept. 2003, vol. 50, in press.
16. C.S. Zhang, L.C. Zhao, T.W. Duerig, and C.M. Wayman: Scripta Metall. Mater., 1990, vol. 24, pp. 1807–12.10.1016/0956-716X(90)90550-Z ↗
17. H.A. Mohamed and J. Washburn: Metall. Trans. A, 1976, vol. 7A, pp. 1545–48.
18. R.J. Burger, J.A. Donovan, and R.J. Arsenault: Metall. Trans. A, 1977, vol. 8A, pp. 2023–24.10.1007/BF02646581 ↗
19. L.C. Zhao, T.W. Duerig, S. Justi, K.N. Melton, J.L. Proft, W. Yu, and C.M. Wayman: Scripta Metall. Mater., 1990, vol. 24, pp. 221–26.10.1016/0956-716X(90)90245-C ↗
20. P. Wollants, J.R. Roos, and L. Delaey: Progr. Mater. Sci., 1993, vol. 37, pp. 227–88.10.1016/0079-6425(93)90005-6 ↗
21. H.C. Tong, and C.M. Wayman: Acta Metall. Mater., 1974, vol. 22, pp. 887–96.10.1016/0001-6160(74)90055-8 ↗