journal article·2008-02

Microstructure, Tensile, and Creep Behavior of Boron-Modified Ti-15Al-33Nb (at.%)

C.J. Cowen, C.J. Boehlert

Publisher page

Abstract

The effect of boron on the microstructure, tensile, and creep behavior of a Ti-15Al-33Nb (at. pct) alloy was investigated. In addition to the normal constituent phases present in the unmodified alloy, the boron-modified alloys contained borides enriched in titanium and niobium. These borides made up to 9 pct of the volume and were present in the form of needles/laths. Boron additions of 5 at. pct resulted in significant strengthening and stiffening and reduced elongation-to-failure. Smaller boron additions of 0.5 at. pct did not as significantly impact the RT tensile properties, but reduced the 650 °C yield strength by 45 pct. Constant load, tensile-creep experiments were performed in the stress range of 150 to 400 MPa and the temperature range of 650 °C to 710 °C, in both air and vacuum environments. The addition of 5 at. pct boron significantly improved the creep resistance, whereas the addition of 0.5 at. pct boron degraded the creep resistance. In-situ tensile-creep experiments indicated that localized grain boundary cracking was prevalent at the prior-β grain boundaries.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties · Boron and Carbon Nanomaterials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. H.T. Kestner-Weykamp, C.W. Ward, T.F. Broderick, M.J. Kaufman: Scripta Metall., 1989, vol. 23, pp. 1697–170210.1016/0036-9748(89)90345-1 ↗
2. C.J. Cowen, C.J. Boehlert: Phil. Mag. A, 2006, vol. 86, pp. 99–12410.1080/14786430500156773 ↗
3. C.J. Boehlert, B.S. Majumdar, V. Seetharaman, D.B. Miracle: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2305–2310.1007/s11661-999-0240-4 ↗
4. L.A. Bendersky, W.J. Boettinger, A. Roytburd: Acta Metall. Mater., 1991, vol. 39, pp. 1059–6910.1016/0956-7151(91)90165-W ↗
5. C.G. Rhodes, J.A. Graves, P.R. Smith, M.R. James: in Structural Intermetallics, R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.B. Miracle, M.V. Nathal, eds., TMS, Warrendale, PA, 1993, pp. 45–52
6. C.J. Cowen and C.J. Boehlert: Adv. Mater. Res., 2007, Part 1, vols. 15–17, pp. 976–8110.4028/www.scientific.net/AMR.15-17.976 ↗
7. C.J. Boehlert, D.B. Miracle: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2349–6710.1007/s11661-999-0244-0 ↗
8. R.W. Hayes: Scripta Metall., 1996, vol. 34, pp. 1005–1210.1016/1359-6462(95)00611-7 ↗
9. R.G. Rowe, M. Larsen: in Titanium 1995, P.A. Blenkinsop, W.J. Evans, H.M. Flowers, eds., The University Press, Cambridge, United Kingdom, 1996, pp. 364–71
10. C.J. Boehlert, J.F. Bingert: J. Mater. Process. Technol., 2001, vol. 117, pp. 401–0810.1016/S0924-0136(01)00796-8 ↗
11. S. Tamirisakandala, R.B. Bhat, J.S. Tiley, D.B. Miracle: Scripta Metall., 2005, vol. 53, pp. 1421–2610.1016/j.scriptamat.2005.08.020 ↗
12. S. Tamirisakandala, D.B. Miracle, R. Srinivasan, and J.S. Gunasekera: Adv. Mater. Processes, 2006, December, pp. 41–43
13. S. Gorsse, D.B. Miracle: Acta Mater., 2006, vol. 51, pp. 2427–4210.1016/S1359-6454(02)00510-4 ↗
14. C.J. Boehlert, C.J. Cowen, S. Tamirisakandala, D.J. McEldowney, D.B. Miracle: Scripta Metall., 2006, vol. 55, pp. 465–6810.1016/j.scriptamat.2006.05.008 ↗
15. F. Tang, S. Nakazawa, M. Hagiwara: Mater. Sci. Eng. A, 2001, vol. 315, pp. 147–5210.1016/S0921-5093(01)01155-8 ↗
16. M. Hagiwara, S. Emura, A. Araoka: Mater. Sci. Forum, 2003, vols. 426–432, pp. 1715–2010.4028/www.scientific.net/MSF.426-432.1715 ↗
17. S.J. Yang, S. Emura, M. Hagiwara, S.W. Nam: Scripta Mater., 2003, vol. 49, pp. 897–90210.1016/S1359-6462(03)00435-4 ↗
18. M. Hagiwara, S. Emura, A. Araoka, B.O. Kong, F. Tang: Metall. Mater. Int., 2003, vol. 9, pp. 265–7210.1007/BF03027045 ↗
19. S. Emura, S.J. Yang, M. Hagiwara: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2971–7910.1007/s11661-004-0244-z ↗
20. C.J. Cowen, C.J. Boehlert: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 26–3410.1007/s11661-006-9004-6 ↗
21. J.E. Hilliard: Metall. Progr., 1964, vol. 78, pp. 99–100
22. Standard Test Methods for Determining Average Grain Size, ASTM Designation E112-96e3, ASTM, West Conshohocken, PA
23. G.A. Hartman, S.M. Russ: in Metal Matrix Composites: Testing, Analysis and Failure Modes, W.S. Johnson, ed., ASTM, Philadelphia, PA, 1989, p. 4310.1520/STP22848S ↗
24. B.J. Kooi, Y.T. Pei, J.T.M. De Hosson: Acta Mater., 2003, vol. 51, pp. 831–4510.1016/S1359-6454(02)00475-5 ↗
25. W. Lu, D. Zhang, X. Zhang, R. Wu, T. Sakata, H. Mori: J. Alloys Compd., 2001, vol. 327, pp. 240–4710.1016/S0925-8388(01)01445-1 ↗
26. D.R. Trinkle: Scripta Mater., 2007, vol. 56, pp. 273–7610.1016/j.scriptamat.2006.10.030 ↗
27. R.W. Evans and B. Wilshire: in Creep of Metals and Alloys, The Institute of Metals, New York, NY, 1985, pp. 157–90
28. R.W. Hertzberg: in Deformation and Fracture Mechanics of Engineering Materials, 4th ed., John Wiley and Sons, New York, NY, 1996, pp. 157–211
29. C.S. Lee, G.W. Han, R.E. Smallman, D. Feng, J.K.L. Lai: Acta Mater., 1999, vol. 47, pp. 1823–3010.1016/S1359-6454(99)00046-4 ↗
30. C.L. White, A. Choudhury: in High Temperature Ordered Intermetallic Alloys II, N.S. Stoloff, C.C. Koch, C.T. Liu, O. Izumi, eds., Materials Research Society, Boston, MA, 1987, pp. 427–41
31. C.T. Liu, C.L. White, J.A. Horton: Acta Metall., 1985, vol. 33, pp. 213–2910.1016/0001-6160(85)90139-7 ↗
32. E.M. Shulson, T.P. Weihs, I. Baker, H.J. Frost, J.A. Horton, Acta Metall., 1986, vol. 34, pp. 1395–9910.1016/0001-6160(86)90027-1 ↗
33. I. Baker, E.M. Shulson, J.R. Michael: Philos. Mag. B, 1988, vol. 57, pp. 379–8510.1080/13642818808208510 ↗
34. C.J. Boehlert: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1977–8810.1007/s11661-001-0010-4 ↗
35. C.J. Boehlert: Mater. Sci. Eng. A, 1999, vol. 267, pp. 82–9810.1016/S0921-5093(99)00024-6 ↗
36. K.B. Panda, K.S. Ravi Chandran: Acta Mater., 2006, vol. 54, pp. 1641–5710.1016/j.actamat.2005.12.003 ↗
37. F. Garofalo: in Fundamentals of Creep and Creep-Rupture in Metals, Macmillan, New York, NY, 1965, pp. 127–202
38. T.K. Nandy, R.S. Mishra, A.K. Gogia, D. Banerjee: Scripta Metall., 1995, vol. 32, pp. 851–5610.1016/0956-716X(95)93213-N ↗
39. T.K. Nandy, R.S. Mishra, D. Banerjee: Scripta Metall., 1993, vol. 28, pp. 569–7410.1016/0956-716X(93)90198-2 ↗
40. T.K. Nandy, D. Banerjee: in Structural Intermetallics, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, M. Yamaguchi, eds., TMS, Warrendale, PA, 1997, pp. 777–86
41. M. Hagiwara and S. Emura: Paper presented at the Workshop on Titanium Alloys Modified with Boron, Dayton, OH, Oct. 11–13, 2005