journal article·2014-07

Microstructure and Mechanical Behavior of Powder Metallurgy Mg98.5Gd1Zn0.5 Alloy

Sandra Cabeza, Gerardo Garcés, Pablo Pérez, Paloma Adeva

Publisher page

Abstract

The Mg98.5Gd1Zn0.5 alloy produced by a powder metallurgy route was studied and compared with the same alloy produced by extrusion of ingots. Atomized powders were cold compacted and extruded at 623 K and 673 K (350 °C and 400 °C). The microstructure of extruded materials was characterized by ¿-Mg grains, and Mg3Gd and 14H-LPSO particles located at grain boundaries. Grain size decreased from 6.8 ¿m in the extruded ingot, down to 1.6 ¿m for powders extruded at 623 K (350 °C). Grain refinement resulted in an increase in mechanical properties at room and high temperatures. Moreover, at high temperatures the PM alloy showed superplasticity at high strain rates, with elongations to failure up to 700 pct.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Hydrogen Storage and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. X. Zeng, Y. Zhsang, C. Lu, W.Ding, Y. Wang, and Y. Zhu: J. Alloy. Comp., 2005, vol. 4395, pp. 213-19.10.1016/j.jallcom.2004.10.070 ↗
2. I. J. Kim, D. H. Bae, and D. H. Ki: Mater. Sci. Eng. A., 2003, vol. 359, pp. 313-18.10.1016/S0921-5093(03)00352-6 ↗
3. M. Yamasaki, K. Hashimoto, K. Hagihara, Y. Kawamura: Acta. Mater., 2001, vol. 59, pp. 3646-58.10.1016/j.actamat.2011.02.038 ↗
4. J. F. Nie, X. Gao and S. M. Zhu: Scr. Mater., 2005, vol. 53, pp. 1049-53.10.1016/j.scriptamat.2005.07.004 ↗
5. J.F. Nie, K. Oh-ishi, X. Gao, K. Hono: Acta. Mater., 2008, vol.56, pp. 6061-76.10.1016/j.actamat.2008.08.025 ↗
6. I. A. Anyanwu, S. Kamado, Y. Kojima: Mater. Trans., 2001, vol.42, pp. 1206-12.10.2320/matertrans.42.1206 ↗
7. B. Smola, J. Stulikova, J. Pelcova, B. L. Mordike: J. Alloys Comp., 2004, vol. 378, Issues 1–2, pp 196–201.10.1016/j.jallcom.2003.10.099 ↗
8. M. Yamasaki, T. Anan, S. Yoshimoto, Y. Kawamura: Scrip. Mater., 2005, vol. 53, pp. 799-803.10.1016/j.scriptamat.2005.06.006 ↗
9. M. Yamasaki, M. Sasaki, M. Nishijima, K. Hiraga, Y. Kawamura: Acta. Mater., 2007, vol.55, pp. 6798-05.10.1016/j.actamat.2007.08.033 ↗
10. Y. Jono, M. Yamasaki, Y. Kawamura: Mater. Trans., 2013, vol. 54, pp. 703-712.10.2320/matertrans.MI201218 ↗
11. S. Zhang, G.Y. Yuana, C. Lua, W.J. Ding: J. Alloys Comp., 2011, vol. 509, pp. 3515-21.10.1016/j.jallcom.2010.12.136 ↗
12. S.Y. Chang, T. Nakagaido, S.K. Hong, D.H. Shin, T. Sato, Mater. Trans., 2001, vol. 42, 1332.10.2320/matertrans.42.1332 ↗
13. Q. Peng, N. Ma, H. Li,. Journal of Rare Earths, 2012, vol. 30, pp. 1064.10.1016/S1002-0721(12)60179-3 ↗
14. Q. Peng, Y. M. Wu, D. Q. Fang, J. Meng, L. M. Wang, J. Alloys Comp., 2007, vol. 430, pp.252-256.10.1016/j.jallcom.2006.05.004 ↗
15. X. Gao, S. M. He, X. Q. Zeng, L. M. Peng, W. J. Ding, J. F. Nie, Mater. Sci. Eng. A, 2006, vol.431, pp. 322-327.10.1016/j.msea.2006.06.018 ↗
16. K. Zhang, Z. Li, Y. Li, M. Ma, Trans. Nonfe. Met. Soc. China, 2008, vol. 18, pp. 12-16.10.1016/S1003-6326(10)60166-5 ↗
17. Y. X. Li, D. Qiu, Y. H. Rong, M. X. Zhang, Intermetallics, 2013, vol.40, pp. 45-49.10.1016/j.intermet.2013.04.002 ↗
18. Y. Kawamura and M. Yamasaki: Mater. Trans., 2007, vol. 48, pp. 2986-92.10.2320/matertrans.MER2007142 ↗
19. A. Inoue, Y. Kawamura, M. Matsushita, K. Hayashi, and J. Koike: J. Mater. Res., 2001, vol. 16, pp. 1894.10.1557/JMR.2001.0260 ↗
20. M. Yamasaki, K. Hashimoto, K. Hagihara and Y. Kawamura: ActaMater., 2011, vol. 59, pp. 3646-58.10.1016/j.actamat.2011.02.038 ↗
21. T. Honma, T. Ohkubo, S. Kamado and K. Hono: ActaMater., 2007, vol. 55, pp. 4137 – 50.10.1016/j.actamat.2007.02.036 ↗
22. D.D. Yin, Q.D. Wang, Y. Gao, C.J. Chen, and J. Zheng: J. Alloys Comp., 2011, vol. 509, pp. 1696.10.1016/j.jallcom.2010.09.194 ↗
23. J. B. Lee, K. Sato, T. J. Konno, and K. Hiraga: Intermetallics, 2011, vol. 19, no. 8, pp. 1096-101.10.1016/j.intermet.2010.12.003 ↗
24. W.M. Morrison and R. Tang: China’s Rare Earth Industry and Export Regime: Economic and Trade Implications for the United States, CRS Report for Congress, 2012. http://www.fas.org/sgp/crs/row/R42510.pdf.
25. Green Car Congress: Japanese Motor Manufacturers Looking for Alternatives to Rare-earth Metals, 2012. http://www.greencarcongress.com/2012/01/motors-20120101.html.
26. C. Sanchez, G. Nussbaum,P. Azavant, and H. Octor : Mater. Sci. Eng. A, 1996, vol. 221, pp. 48-57.10.1016/S0921-5093(96)10469-X ↗
27. H. Watanabe, T. Mukai, M. Mabuchi, and K. Higashi : Acta Mater., 2001, vol. 49, pp. 2027-37.10.1016/S1359-6454(01)00101-X ↗
28. H. Watanabe, T. Mukai, M. Mabuchi, and K. Higashi: Scr. Mater., 1999, vol. 41, pp. 209-13.10.1016/S1359-6462(99)00155-4 ↗
29. G. Garcés, F. Domínguez, P. Pérez, G. Caruana, and P. Adeva: J. Alloys compounds, 2006, vol. 422, pp. 293–98.10.1016/j.jallcom.2005.11.069 ↗
30. E. Mora, G. Garcés, E. Oñorbe, P. Pérez, and P. Adeva: Scr. Mater., 2009, vol.60, pp. 776–779.10.1016/j.scriptamat.2009.01.012 ↗
31. G. Garcés, M. Maeso, P. Pérez, and P. Adeva: Mat. Sci. Eng. A, 2007, vol. 462, pp. 127–31.10.1016/j.msea.2006.05.172 ↗
32. F.A. Mohamed, K.-T. Park, E.J. Lavernia: Mater. Sci. Eng. A, 1992, vol. 150, pp. 21-35.10.1016/0921-5093(90)90004-M ↗
33. K.T. Park, F.A. Mohamed: Metall Mater Trans A, 1995, vol. 26, pp. 3119–3129.10.1007/BF02669441 ↗
34. J. F. Nie, Metal. And Mat. Trans. A, 2012, vol.43, pp. 3891-3939.10.1007/s11661-012-1217-2 ↗
35. P. J. Apps, H. Karimzadeh, J. F. King, G. W. Lorimer, Scrip. Mater., 2003, vol. 48, pp. 1023-1028.10.1016/S1359-6462(02)00596-1 ↗
36. J. Cadek, V. Sustek, M. Pahutová: Mater. Sci. Eng. A, 1994, vol. 174, pp. 141-147.10.1016/0921-5093(94)91082-0 ↗
37. G. Garcés, E. Oñorbe, F. Dohes, P. Pérez, J.M. Antoranz, P. Adeva: Mat. Sci. Eng. A, 2012, vol. 539, pp. 48–55.10.1016/j.msea.2012.01.023 ↗
38. H. Watanabe, T. Mukai, K. Ishikawa, M. Mabuchi, K. Higashi: Mater. Sci. Eng. A, 2001, vol. 307, pp. 119-128.10.1016/S0921-5093(00)01974-2 ↗
39. H.J. Frost and M.F. Ashby: Deformation-Mechanism Maps: The Plasticity and Creep of Metals and Ceramics, Pergamon, Oxford, 1982.
40. Sherby, O. D. and Wadsworth, J., in Deformation Processing and Structure. American Society for Metals, Metals Park, OH, 1982, p. 355.
41. H. Watanabe, T. Mukai, M. Kohzu, S. Tanabe, K. Higashi: Acta Mater., 1999, vol. 47, pp. 3753-3758.10.1016/S1359-6454(99)00253-0 ↗