journal article·2013-06

Effect of the Heat Treatment on the Cube Recrystallization Texture of Al-Mn-Mg Aluminum Alloy

Wenchang Liu, Min Ma, Fuqian Yang

Publisher page

Abstract

The evolution of the recrystallized structure and texture of a cold-rolled Al-Mn-Mg alloy with different heat treatments was studied. The alloy with dual-heat treatments at 872 K and 644 K (599 °C and 371 °C) exhibited fast recrystallization and had coarser recrystallized grains and stronger cube texture than the alloy with single-heat treatment at 872 K (599 °C). The differences in microstructures and textures were attributed to the precipitation state. Large particles formed during annealing at 872 K (599 °C) played a randomizing effect on the total recrystallization texture, while smaller particles formed during annealing at 644 K (371 °C) not only enhanced recrystallization of the cold-rolled sheets, but also caused formation of coarse, recrystallized grains with a strong cube texture. The evolution of the coarse grains was due to nucleation of cube-oriented grains.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · Solidification and crystal growth phenomena

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. J. Hjelen, R. Orsund, E. Nes, Acta Metall. Mater. 39 (1991) 1377-1404.10.1016/0956-7151(91)90225-P ↗
2. R.D. Doherty, K. Kashyap, S. Panchanadeeswaran, Acta Metall. Mater. 41 (1993) 3029-3053.10.1016/0956-7151(93)90117-B ↗
3. H.E. Vatne, T. Furu, E. Nes, Mater. Sci. Technol. 12 (1996) 201-210.10.1179/026708396790165678 ↗
4. R.D. Doherty, Prog. Mater. Sci. 42 (1997) 39-58.10.1016/S0079-6425(97)00007-8 ↗
5. O. Engler, Acta Mater. 46 (1998) 1555-1568.10.1016/S1359-6454(97)00354-6 ↗
6. F.J. Humphreys, Acta Metall. 25 (1977) 1323-1344.10.1016/0001-6160(77)90109-2 ↗
7. F.J. Humphreys, M. Hatherly, Recrystallisation and related annealing phenomena, Oxford, Elsevier Science, 1995.
8. O. Engler, Mater. Sci. Forum 273-272 (1998) 483-488.10.4028/www.scientific.net/MSF.273-275.483 ↗
9. M. Somerday, F.J. Humphreys, Mater. Sci. Technol. 19 (2003) 20-29.10.1179/026708303225008590 ↗
10. N. Sun, B.R. Patterson, J.P. Suni, R.D. Doherty, H. Weiland, P. Kadolkar, C.A. Blue, G.B. Thompson, Metall. Trans. A 39 (2008) 165-170.10.1007/s11661-007-9367-3 ↗
11. D. Juul Jensen, N. Hansen, F.J. Humphreys, Acta metall. 33 (1985) 2155-2162.10.1016/0001-6160(85)90176-2 ↗
12. N. Hansen, D. Juul Jensen, Metall. Trans. A 17 (1986) 253-259.10.1007/BF02643901 ↗
13. R. Rsund, E. Nes (1988) Scripta Metall. 22:665-669.10.1016/S0036-9748(88)80179-0 ↗
14. O. Engler, H.E. Vatne, E. Nes, Mater. Sci. Eng. A 205 (1996) 187-198.10.1016/0921-5093(95)09879-8 ↗
15. K. Lücke, O. Engler, Mater. Sci. Technol. 6 (1990) 1113-1130.10.1179/026708390790190009 ↗
16. O. Engler, J. Hirsch, K. Lücke, Acta metall. mater. 43 (1995) 121-138.
17. O. Engler, P. Yang, X.W. Kong, Acta mater. 44 (1996) 3349-3369.10.1016/1359-6454(95)00416-5 ↗
18. H.E. Vatne, O. Engler, E. Nes, Mater. Sci. Technol. 13 (1997) 93-102.10.1179/026708397790285764 ↗
19. O. Engler, M. Tap, J. Hirsch, G. Gottstein, in: Z. Liang, L. Zuo, Y. Chu (Eds.), Proceedings of ICOTOM 11, International Academic Publishing, Beijing, China, 1996, p. 405.
20. O. Engler, J. Hirsch, Mater. Sci. Forum 217-222 (1996) 479-486.10.4028/www.scientific.net/MSF.217-222.479 ↗
21. R.L. Higginson, M. Aindow, P.S. Bate, Mater. Sci. Eng. A 225 (1997) 9-21.10.1016/S0921-5093(96)10571-2 ↗
22. O. Daaland, E. Nes, Acta Mater. 44 (1996) 1413-1435.10.1016/1359-6454(95)00290-1 ↗
23. S. Tangen, K. Sjlstad, T. Furu, E. Nes, Metall. Trans. A 41 (2010) 2970-2983.10.1007/s11661-010-0265-8 ↗
24. J. Liu, J.G. Morris, Metall. Trans. A 34 (2003) 2029-2032.10.1007/s11661-003-0169-y ↗
25. W.C. Liu, J.G. Morris, Metall. Trans. A 36 (2005) 2829-2848.10.1007/s11661-005-0279-9 ↗
26. W.C. Liu, J.G. Morris, Scripta Mater. 54 (2006) 2095-2099.10.1016/j.scriptamat.2006.03.004 ↗
27. Q. Zeng, X. Wen, T. Zhai, Metall. Trans. A 40 (2009) 2488-2497.10.1007/s11661-009-9942-x ↗
28. O. Engler, X.W. Kong, K. Lücke, Acta Mater. 49 (2001) 1701-1715.10.1016/S1359-6454(01)00087-8 ↗
29. J.-H. Ryu, D.N. Lee, Mater. Sci. Eng. A 336 (2002) 225-232.10.1016/S0921-5093(01)01960-8 ↗
30. W.C. Liu, Z. Li, C.-S. Man, D. Raabe, J.G. Morris, Mater. Sci. Eng. A 434 (2006) 105-113.10.1016/j.msea.2006.06.102 ↗
31. P.L. Morris, B.J. Duggan, Metal Sci. 12 (1978) 1-7.10.1016/0036-9748(78)90215-6 ↗
32. V. Hansen, J. Gjønnes, B. Andersson, J. Mater. Sci. Lett. 8 (1989) 823-826.10.1007/BF01730150 ↗
33. L. Chen, J.G. Morris, Scripta Metall. 18 (1984) 1365-1370.10.1016/0036-9748(84)90366-1 ↗
34. Y.J. Li, L. Arnberg, Mater. Sci. Eng. A 347 (2003) 130-135.10.1016/S0921-5093(02)00555-5 ↗
35. H.J. Bunge, Texture Analysis in Materials Science, Butterworths, London, 1982.
36. W.C. Liu, J.G. Morris, Mater. Sci. Eng. A 339 (2003) 183-193.10.1016/S0921-5093(02)00160-0 ↗
37. W.C. Liu, J.G. Morris, Metall. Trans. 35A (2004) 265-277.10.1007/s11661-004-0127-3 ↗
38. W.C. Liu, T. Zhai, J.G. Morris, Mater. Sci. Eng. A 358 (2003) 84-93.10.1016/S0921-5093(03)00264-8 ↗
39. N. Hansen, T. Leffers, J.K. Kjems, Acta Metall. 29 (1981) 1523-1533.10.1016/0001-6160(81)90186-3 ↗
40. W.C. Liu, T. Zhai, C.-S. Man, J.G. Morris, Scripta Mater. 49 (2003) 539-545.10.1016/S1359-6462(03)00350-6 ↗
41. O. Engler, J. Hirsch, Mater. Sci. Eng. A 336 (2002) 249-262.10.1016/S0921-5093(01)01968-2 ↗