journal article·2014-04

Austenite Formation in a Cold-Rolled Semi-austenitic Stainless Steel

Carola Celada Casero, David San Martín

Publisher page

Abstract

The progress of the martensite (a¢) to austenite (c) phase transformation has been thoroughly investigated at different temperatures during the continuous heating of a cold-rolled precipitation hardening metastable stainless steel at a heating rate of 0.1 K/s. Heat-treated samples have been characterized using different experimental complementary techniques: high-resolution dilatometry, magnetization, and thermoelectric power (TEP) measurements, micro-hardness- Vickers testing, optical/scanning electron microscopy, and tensile testing. The two-step transformation behavior observed is thought to be related to the presence of a pronounced chemical banding in the initial microstructure. This banding has been characterized using electron probe microanalysis. Unexpectedly, dilatometry measurements seem unable to locate the end of the transformation accurately, as this technique does not detect the second step of this transformation (last 20 pct of it). It is shown that once the starting (AS) and finishing (AF) transformation temperatures have been estimated by magnetization measurements, the evolution of the volume fractions of austenite and martensite can be evaluated by TEP or micro-hardness measurement quite reliably as compared to magnetization measurements. The mechanical response of the material after being heated to temperatures close to AS, AF, and (AF - AS)/2 is also discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. P. Lui: Mater. Charact., 2000, vol. 44, pp. 413–24.10.1016/S1044-5803(00)00060-7 ↗
2. M. Eskandari, A. Najafizadeh, A. Kermanpur, and M. Karimi: Mater. Des., 2009, vol. 30, pp. 3869–72.10.1016/j.matdes.2009.03.043 ↗
3. R.D.K. Misra, Z. Zhang, Z. Ji, P.K.C. Venkatsurya, M.C. Somani, L.P. Karjalainen: Mater. Sci. Eng. A, 2012, vol. 548, pp. 161–74.10.1016/j.msea.2012.04.005 ↗
4. I. Shakova, V. Dudko, A. Belyakov, K. Tsuzaki, R. Kaibyshev: Mater. Sci. Eng. A, 2012, vol. 545, pp. 176–86.10.1016/j.msea.2012.02.101 ↗
5. K. Tomimura, S. Takaki, S. Tanimoto, Y. Tokunaga: ISIJ Int., 1991, vol. 31, pp. 725–27.
6. K. Tomimura, S. Takaki, Y. Tokunaga: ISIJ Int., 1991, vol. 31, pp. 1431–37.10.2355/isijinternational.31.1431 ↗
7. Y. Murata, S. Ohashi, Y. Uematsu: ISIJ Int., 1993, vol. 33, pp. 711–20.10.2355/isijinternational.33.711 ↗
8. Y. Ma, J.E. Jin, Y.K. Lee: Scripta Mater., 2005, vol. 52, pp. 1311–15.10.1016/j.scriptamat.2005.02.018 ↗
9. S. Rajasekhara, L.P. Karjalainen, A. Kyröläinen, P.J. Ferreira: Mater. Sci. Eng. A, 2010. Vol. 527, pp. 1986–96.10.1016/j.msea.2009.11.037 ↗
10. J. Huang, X. Ye, J. Gu, X. Chen, Z. Xu: Mater. Sci. Eng. A, 2012, vol. 532, pp. 190–95.10.1016/j.msea.2011.10.080 ↗
11. R. Kapoor, I.S. Batra (2004) Mater. Sci. Eng. A 371:324–34.10.1016/j.msea.2003.12.023 ↗
12. J. Post, C. de Vries, J. Huétink, J. Mater. Process. Technol., 2009, vol. 209, pp. 5558–72.10.1016/j.jmatprotec.2009.05.020 ↗
13. D. San Martin, N.H. van Dijk, E. Bruck, S. van der Zwaag: Mater. Sci. Eng. A, 2008, vol. 481–482, pp. 757–61.10.1016/j.msea.2006.11.177 ↗
14. D. San Martın, K.W.P. Aarts, P.E.J. Rivera-Diaz-del-Castillo, N.H. van Dijk, E. Bruck, S. van der Zwaag: J Magn. Magn. Mater., 2008, vol. 320, pp. 1722–28.10.1016/j.jmmm.2008.02.002 ↗
15. D. San Martin, N.H. van Dijk, E. Jiménez-Melero, E. Kampert, U. Zeitler, S. van der Zwaag: Mater. Sci. Eng. A, 2010, vol. 527, pp. 5241–45.10.1016/j.msea.2010.04.085 ↗
16. D. San Martin, E. Jimenez-Melero, J. A. Duffy, V. Honkimaki, S. van der Zwaag and N. H. van Dijk: J. Appl. Crystallogr., 2012, vol. 45, pp. 748–57.10.1107/S0021889812024892 ↗
17. M. Hattestrand, J.-O. Nilsson, K. Stiller, P. Liu, M. Andersson, Acta Mater., 2004, vol. 52, pp. 1023–37.10.1016/j.actamat.2003.10.048 ↗
18. T.A. Kop, J. Sietsma, S. van der Zwaag: Mater. Sci. Technol., 2001, vol. 17, pp. 1569–74.10.1179/026708301101509629 ↗
19. R.A. Jaramillo, M.T. Lusk, M.C. Mataya: Acta Mater., 2004, vol. 52, 851–58.10.1016/j.actamat.2003.11.017 ↗
20. Y-G. Cho, D-W. Suh, J.K. Lee, H.N. Han: Scripta Mater., 2011, vol. 65, 569–72.10.1016/j.scriptamat.2011.06.012 ↗
21. C. García de Andrés, F.G. Caballero, C. Capdevila, L.F. Álvarez: Mater. Charact., 2002, vol. 48, pp. 101–11.10.1016/S1044-5803(02)00259-0 ↗
22. D. San Martín, P.E.J. RiveraDiazdelCastillo, E. Peekstok, S. van der Zwaag (2007) Mater. Charact. 58:455–60.10.1016/j.matchar.2006.06.009 ↗
23. Y. Kawaguchi, S. Yamanaka: J Alloy. Compd., 2002, vol. 336, pp. 301–14.10.1016/S0925-8388(01)01897-7 ↗
24. C. Celada, I. Toda-Caraballo, B. Kim, D. San Martín: Mater. Charact., 2013, vol. 84, pp. 142–52.10.1016/j.matchar.2013.07.018 ↗
25. A.F. Padilha, R.L. Plaut and P.R. Rios: ISIJ Int., 2003, vol. 43, pp. 135–43.10.2355/isijinternational.43.135 ↗
26. R. Kapoor, L. Kumar, I.S. Batra: Mater. Sci. Eng. A, 2003, vol. 352, pp. 318–24.10.1016/S0921-5093(02)00934-6 ↗
27. D. San Martin, P.E.J. Rivera-Diaz-del-Castillo and C. Garcia de Andres: Scripta Mater., 2008, vol. 58, pp. 926–29.10.1016/j.scriptamat.2008.01.019 ↗
28. C.N. Hsiao, C.S. Chiou, J.R. Yang: Mater. Chem. Phys., 2002, 74, pp. 134–42.10.1016/S0254-0584(01)00460-6 ↗
29. F. Christien, M.T.F. Telling, K.S. Knight: Mater. Charact., 2013, vol. 82, pp. 5057.10.1016/j.matchar.2013.05.002 ↗
30. M. Huang, A. Pineau, O. Bouaziz, T-D. Vu (2012) Mater. Sci. Eng. A 541:196–98.10.1016/j.msea.2012.02.022 ↗
31. H.N. Han, J.K. Lee, S-J. Kim: Mater. Lett., 2005, vol. 59, pp. 158–61.10.1016/j.matlet.2004.07.030 ↗
32. H. Azizi-Alizamini, M. Militzer, W. Poole (2011) Metall. Mater. Trans. A 42A: 1544–57.10.1007/s11661-010-0551-5 ↗
33. T. de Cock, C. Capdevila, F.G. Caballero, C. García de Andrés: Scripta Mater., 2006, vol. 54, pp. 949–54.10.1016/j.scriptamat.2005.10.052 ↗
34. A. Bojack, L. Zhao, P.F. Morris, J. Sietsma: Mater. Charact., 2012, vol. 71, pp. 77–86.10.1016/j.matchar.2012.06.004 ↗
35. N. Lavaire, J. Merlin, V. Sardoy: Scripta Mater., 2001, vol. 44, pp. 553–59.10.1016/S1359-6462(00)00634-5 ↗
36. F.G. Caballero, A. Garcia-Junceda, C. Capdevila, C. García de Andrés: Scripta Mater., 2005, vol. 52, pp. 501–05.10.1016/j.scriptamat.2004.11.005 ↗
37. F.G. Caballero, C. Capdevila, L.F. Álvarez, C. García de Andrés: Scripta Mater., 2004, vol. 50, pp. 1061–66.10.1016/j.scriptamat.2003.12.017 ↗
38. J.P. Ferrer, T. De Cock, C. Capdevila, F.G. Caballero, C. García de Andrés: Acta Mater., 2007, vol. 55, pp. 2075–83.10.1016/j.actamat.2006.11.010 ↗
39. C. Capdevila, M.K. Miller, J. Chao (2012) Acta Mater 60:4673–84.10.1016/j.actamat.2012.05.022 ↗
40. R. Schnitzer, G. A. Zickler, E. Lach, H. Clemens, S. Zinner, T. Lippmann, H. Leitner: Mater. Sci. Eng. A, 2010, vol. 527, pp. 2065–70.10.1016/j.msea.2009.11.046 ↗
41. R. Schnitzer, S. Zinner and H. Leitner: Scripta Mater., 2010, vol. 62, pp. 286–89.10.1016/j.scriptamat.2009.11.020 ↗
42. K. Datta, R. Delhez, P. M. Bronsveld, J. Beyer, H. J. M. Geijselaers and J. Post: Acta Mater., 2009, vol. 57, pp. 3321- 3326.10.1016/j.actamat.2009.03.039 ↗
43. T. Meinders, E. S. Perdahcioglu, M. van Riel, H.H. Wisselink: Int. J. Mach. Tools Manuf., 2008, vol. 48, pp. 485–98.10.1016/j.ijmachtools.2007.08.005 ↗
44. D. Raabe, D. Ponge, O. Dmitrieva and B. Sander: Scripta Mater., 2009, vol. 60, pp. 1141–44.10.1016/j.scriptamat.2009.02.062 ↗