journal article·2010-11

Refinement of Master Densification Curves for Sintering of Titanium

I. M. Robertson, G. B. Schaffer

Publisher page

Abstract

An approximate master curve for the densification of cold-pressed titanium powder during vacuum sintering was published previously. It was based on the combined results for three different titanium powders. The master densification curve model incorporates the effects of particle size, compaction pressure, sintering time, and sintering temperature on densification. The collection of a large amount of additional data now allows refinement of the model. Distinct curves are presented for three different titanium powders, prealloyed Ti6Al4V, and Ti-Ni binary alloys. The master densification curve is sigmoidal, but deviates from the ideal form at high sintered density; the relative sintered density saturates at 90 to 100 pct, depending on the particle size of the titanium powder, and to a lesser extent the compaction pressure. The master densification curve below the saturation level is slightly dependent on the compaction pressure. © 2010 The Minerals, Metals & Materials Society and ASM International.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Powder Metallurgy Techniques and Materials · Injection Molding Process and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. H.-H. Su and D.L. Johnson: J. Am. Ceram. Soc., 1996, vol. 79, pp. 3211–17.10.1111/j.1151-2916.1996.tb08097.x ↗
2. D.C. Blaine, J.D. Gurosik, S.J. Park, D.F. Heaney, and R.M. German: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 715–20.10.1007/s11661-006-0043-9 ↗
3. W.Q. Shao, S.O. Chen, D. Li, Y. Wan, Y.C. Zhang, S.S. Zhang, and H.S. Cao: Mater. Sci. Technol., 2008, vol. 24, pp. 734–38.10.1179/174328408X278475 ↗
4. J. Tatami, Y. Suzuki, T. Wakihara, T. Meguro, and K. Komeya: Key Eng. Mater., 2006, vols. 317–318, pp. 11–14.10.4028/www.scientific.net/KEM.317-318.11 ↗
5. D. Li, S. Chen, Y. Jing, W. Shao, Y. Zhang, and W. Luan: Sci. Sintering, 2007, vol. 39, pp. 103–10.10.2298/SOS0702103L ↗
6. D. Li, S. Chen, W. Shao, X. Ge, Y. Zhang, and S. Zhang: Mater. Lett., 2008, vol. 62, pp. 849–51.10.1016/j.matlet.2007.06.076 ↗
7. K.G. Ewsuk, D.T. Ellerby, and C.B. DiAntonio: J. Am. Ceram. Soc., 2006, vol. 89, pp. 2003–09.10.1111/j.1551-2916.2006.00990.x ↗
8. M.V. Nikolic, V.P. Pavlovic, V.B. Pavlovic, N. Labus, and B. Stojanovic: Mater. Sci. Forum, 2005, vol. 494, pp. 417–22.10.4028/www.scientific.net/MSF.494.417 ↗
9. T.R.G. Kutty, K.B. Khan, and P.V. Hegde: J. Nucl. Mater., 2004, vol. 327, pp. 211–19.10.1016/j.jnucmat.2004.02.007 ↗
10. S.J. Park, K. Cowan, J.L. Johnson, and R.M. German: Int. J. Refract. Met. Hard Mater., 2008, vol. 26, pp. 152–63.10.1016/j.ijrmhm.2007.05.010 ↗
11. D. Djurovic, M. Zinkevich, S. Boskovic, V. Srot, and F. Aldinger: Mater. Sci. Forum, 2007, vol. 555, pp. 189–94.10.4028/www.scientific.net/MSF.555.189 ↗
12. D.C. Blaine, S.J. Park, P. Suri, and R.M. German: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2827–36.10.1007/BF02586115 ↗
13. M. Pandheeradi, A. Casagranda, A.L. Gurson, C.L. Trybus, and T.A. Leonhardt: PM2TEC 2001: 2001 Int. Conf. on Powder Metallurgy & Particulate Materials, New Orleans, LA, Metal Powder Industries Federation, Princeton, NJ, 2001.
14. K. An and M.K. Han: Mater. Sci. Eng. A, 2005, vol. 391, pp. 66–70.10.1016/j.msea.2004.08.055 ↗
15. K.J. An, H.J. Kim, and M.K. Han: Mater. Trans., 2008, vol. 49, pp. 1926–28.10.2320/matertrans.MRP2008026 ↗
16. P. Garg, S.-J. Park, and R.M. German: Intl. J. Refract. Met. Hard Mater., 2007, vol. 25, pp. 16–24.10.1016/j.ijrmhm.2005.10.014 ↗
17. R.M. German, J. Ma, X. Wang, and E. Olevsky: Powder Metall., 2006, vol. 49, pp. 19–27.10.1179/174329006X94690 ↗
18. S.J. Park, J.M. Martin, J. F. Guo, J.L. Johnson, and R.M. German: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 3337–46.10.1007/BF02586168 ↗
19. G. Aggarwal, S.-J. Park, I. Smid, and R.M. German: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 606–14.10.1007/s11661-007-9102-0 ↗
20. S.J. Park and R.M. German: Int. J. Mater. Struct. Integ., 2007, vol. 1, pp. 128–47.10.1504/IJMSI.2007.013868 ↗
21. R.M. German and E. Olevsky: Int. J. Refract. Met. Hard Mater., 2005, vol. 23, pp. 77–84.10.1016/j.ijrmhm.2004.10.002 ↗
22. S.J. Park, S.H. Chung, J.M. Martín, J.L. Johnson, and R.M. German: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2941–48.10.1007/s11661-008-9654-7 ↗
23. S.J. Park, J.M. Martin, J.F. Guo, J.L. Johnson, and R.M. German: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2837–48.10.1007/BF02586116 ↗
24. I.M. Robertson and G.B. Schaffer: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 1968–79.10.1007/s11661-009-9894-1 ↗
25. I.M. Robertson and G.B. Schaffer: Powder Metall., 2009, vol. 52, pp. 213–24.10.1179/174329009X380590 ↗
26. W.F. Gale and T.C. Totemeier: Smithells Metals Reference Book, 8th ed., Elsevier, Amsterdam, 2004.
27. D. Eylon, F.H. Froes, and S. Abkowitz: ASM Handbook, ASM INTERNATIONAL, Materials Park, OH, 1998, pp. 874–86.