journal article·2011-08

Microstructure and Texture Evolution of Cold-Drawn 〈111〉 Single-Crystal Copper

Jian Chen, Wen Yan, Jian Miao, Chunxia Liu, Xinhui Fan

Publisher page

Abstract

The evolution of microstructure and texture in drawn 〈111〉 single-crystal copper with strains from 0.28 to 4.12 was analyzed. The texture analysis shows that in drawn 〈111〉 single-crystal copper, grain subdivision takes place, and at high strains, fiber textures consist of 〈111〉 and 〈100〉. However, the distribution of fiber textures is inhomogeneous along the radial direction. 〈111〉 is located in the center of samples and 〈100〉 is near the surface. Comparison of the texture evolution of drawn 〈111〉 and 〈100〉 single-crystal coppers indicates that the initial orientation is an important factor affecting the ratio of fiber texture 〈111〉 to 〈100〉. The results of microstructure show that at strains lower than 0.28, microstructure can be characterized as dislocation cells and few microbands. When strains are more than 0.58, a large number of extended planar dislocation boundaries appear. At strains more than 1.96, most of the extended planar boundaries are parallel to the drawn direction.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. M. Zelin: Acta Mater., 2002, vol. 50, pp. 4431–47.10.1016/S1359-6454(02)00281-1 ↗
2. J.H. Cho, A.D. Rollett, J.S. Cho, Y.J. Park, J.T. Moon, and K.H. Oh: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 3085–97.10.1007/s11661-006-0189-5 ↗
3. J.H. Cho, J.S. Cho, J.T. Moon, J. Lee, Y.H. Cho, Y.W. Kim, A.D. Rollett, Y.J. Park, and K.H. Oh: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1113–19.10.1007/s11661-003-0131-z ↗
4. E.N. Popova, V.V. Popov, E.P. Romanov, N.E. Hlebova, and A.K. Shikov: Scripta Mater., 2004, vol. 51, pp. 727–31.10.1016/j.scriptamat.2004.05.037 ↗
5. W.R. Hibbard: Trans. AIME, 1950, vol. 77, pp. 581–85.
6. J.H. Chao, A.D. Rollett, J.S. Cho, Y.J. Park, and K.H. Oh: Mater. Sci. Eng. A, 2006, vol. 432, pp. 202–15.10.1016/j.msea.2006.05.143 ↗
7. C.J. McHargue, L.K. Jetter, and J.C. Ogle: Trans. TMS-AIME, 1959, vol. 215, pp. 831–37.
8. A.T. English and G.Y. Chin: Acta Metall., 1965, vol. 13, pp. 1013–16.10.1016/0001-6160(65)90010-6 ↗
9. H. Ahlborn and G.Wassermann: Z. Metallkd., 1963, vol. 54, pp. 1–6.
10. M.G. Stout and J.A. Orourke: Metall. Trans. A, 1989, vol. 20A, pp. 125–31.10.1007/BF02647499 ↗
11. J. Grewen and G. Wassermann: Z. Metallkd., 1954, vol. 45, p. 498.
12. K. Rajian and R. Petkie: Mater. Sci. Eng. A, 1998, vol. 257, pp. 185–97.10.1016/S0921-5093(98)00838-7 ↗
13. J. Chen, W. Yan, R.G. Ding, and X.H. Fan: J. Mater. Sci., 2009, vol. 44, pp. 1909–17.10.1007/s10853-008-3079-y ↗
14. Q. Liu: Ultramicroscopy, 1995, vol. 60, pp. 81–89.10.1016/0304-3991(95)00049-7 ↗
15. Q. Liu: J. Appl. Cryst., 1994, vol. 27, pp. 762–66.10.1107/S0021889894002621 ↗
16. H. Park and D.H. Lee: Mater. Sci. Forum., 2002, vols. 408–412, pp. 637–42.10.4028/www.scientific.net/MSF.408-412.637 ↗
17. H. Park and D.H. Lee: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 531–41.10.1007/s11661-003-0089-x ↗
18. J.A. Werty and X. Huang: Phil. Mag., 2003, vol. 83, pp. 969–83.10.1080/0141861031000064582 ↗
19. A. Godfery and D.A. Hughes: Acta Mater., 2000, vol. 48, pp. 1879–1905.
20. G. Winther: Acta Mater., 2003, vol. 51, pp. 417–29.10.1016/S1359-6454(02)00423-8 ↗
21. Q. Liu, X. Huang, D.J. Lloyd, and N. Hansen: Acta Mater., 2002, vol. 50, pp. 3789–3802.10.1016/S1359-6454(02)00174-X ↗
22. B. Jakobsen, H.F. Poulsen, U. Lienert, J. Almer, S.D. Shastri, H.O. Sørensen, C. Gundlach, and W. Pantleon: Science, 2006, vol. 312, pp. 889–92.10.1126/science.1124141 ↗
23. Q. Liu, D.J. Jensen, and N. Hansen: Acta Mater., 1998, vol. 46, pp. 5819–38.10.1016/S1359-6454(98)00229-8 ↗
24. C.C. Merruman, D.P. Field, and P. Trivedi: Mater. Sci. Eng. A, 2006, vol. 494, pp. 28–35.10.1016/j.msea.2007.10.090 ↗
25. X. Huang and N.Hansen: Scripta Mater., 1997, vol. 37, pp. 1–7.10.1016/S1359-6462(97)00072-9 ↗
26. X. Huang and N. Hansen: Mater. Sci. Eng. A, 2004, vols. 387–389, pp. 186–90.10.1016/j.msea.2004.02.081 ↗
27. X. Huang: Scripta Mater., 1998, vol. 38, pp. 1697–1702.10.1016/S1359-6462(98)00051-7 ↗
28. X. Huang and G. Winther: Phil. Mag. A, 2007, vol. 87, pp. 5189–5214.10.1080/14786430701652851 ↗
29. H. Mughrabi, T. Ungar, W. Kienle, and M. Wilkens: Phil. Mag. A, 1986, vol. 53, pp. 793–813.10.1080/01418618608245293 ↗
30. Y. Kawasaki and T. Takeuchi: Scripta Metall., 1980, vol. 14, pp. 183–88.10.1016/0036-9748(80)90091-5 ↗
31. D.A. Hughes and N. Hansen: Acta Mater., 1997, vol. 45, pp. 3871–86.10.1016/S1359-6454(97)00027-X ↗
32. D.A. Hughes, N. Hansen, and D.J. Bammann: Scripta Mater., 2003, vol. 48, pp. 147–53.10.1016/S1359-6462(02)00358-5 ↗