journal article·2014-06

In Situ Observation for Abnormal Grain Coarsening in Vacuum-Carburizing Process

Yasuhiro Yogo, Kouji Tanaka

Publisher page

Abstract

An in situ observation method was developed to investigate abnormal grain coarsening which occurs around the surface of steel during the vacuum-carburizing process. In this method, diffusion of carbon atoms in the vacuum carburizing was simulated by a cementite and steel diffusion couple. Abnormal grain coarsening, which appeared around the cementite and steel interface, was observed by a confocal scanning laser microscope. With this method, it was observed that when holding time was 60 seconds, the temperature at which the abnormal grain coarsening appeared in a specimen was higher when carburized than the temperature when not carburized. On the contrary, when holding time was 120 seconds, the temperature at which the abnormal grain coarsening appeared in a specimen was 10 K to 20 K lower than that in a non-carburized specimen. The validity of the observed results was confirmed by the calculated NbC fraction using Nb solubility and measured carbon content.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. S. Tsuji, I. Ishigami and K. Yamanaka: Trans. Jpn Inst. Met., 28 (1987), 48–56.10.2320/matertrans1960.28.48 ↗
2. M. Sugiyama: Netsu Shori (J. Jpn Soc. Heat Treat.), 37 (1997), 154–60.
3. N.M. Ryzhov, A.E. Smirnov, R.S. Fakhurtdinov, L.M. Mulyakaev, and V.I. Gromov: Met. Sci. Heat Treat., 46 (2004), 230–35.10.1023/B:MSAT.0000043108.71523.08 ↗
4. P. Kula, R. Pietrasik, K. Dybowski: J. Mater. Proc. Technol., 164–165 (2005), 876–81.10.1016/j.jmatprotec.2005.02.145 ↗
5. T. Machi: Netsu Shori (J. Jpn. Soc. Heat Treat.), 2005, vol. 45, pp. 80–83.
6. K. Ohbayashi: Denki Seiko (Electr. Furn. Steel), 2008, vol. 79, pp. 53–60.10.4262/denkiseiko.79.53 ↗
7. N. Okumura: Netsu Shori (J. Jpn Soc. Heat Treat.), 2009, vol. 49, pp. 257–62.
8. K. Widanka: Powder Metall. Prog., 9 (2009), 165–72.
9. T. Morita and H. Matsumura: CAMP-ISIJ, 19 (2006), 1223.
10. T. Morita and H. Matsumura: CAMP-ISIJ, 19 (2006), 1225.
11. T. Morita and T. Hanyuda: Tetsu-to-Hagané, 92 (2006), 268–73.10.2355/tetsutohagane1955.92.4_268 ↗
12. T. Morita, K. Inoue, and T. Hanyuda: Denki Seiko (Electr. Furn. Steel), 2006, vol. 77, pp. 5–9.10.4262/denkiseiko.77.5 ↗
13. T. Morita: Netsu Shori (J. Jpn Soc. Heat Treat.), 2009, vol. 49, pp. 237–42.
14. K. Tanaka, H. Ikehata, K. Nakanishi, and T. Nishikawa: Metall. Mater. Trans. A, 39A (2008), 1248–57.10.1007/s11661-008-9530-5 ↗
15. K. Tanaka, H. Ikehata, H. Takamiya, and H. Mizuno: Tetsu-to-Hagané, 97 (2011), 130–35.10.2355/tetsutohagane.97.130 ↗
16. H. Ikehata, K. Tanaka, H. Takamiya, and H. Mizuno: ISIJ Int., 52 (2012), 1348–55.10.2355/isijinternational.52.1348 ↗
17. S. Todo, M. Horimoto, T. Nishizawa: 17th Int. Fed. Heat Treat. Surf. Eng. Congr., 2008, pp. 117–20.
18. Y. Yogo, K. Tanaka, and K. Nakanishi: Mater. Trans., 50 (2009), 280–85.10.2320/matertrans.MRA2008387 ↗
19. Y. Yogo, H. Takeuchi, K. Tanaka, N. Iwata, K. Nananishi and T. Ishikawa: Microsc. Res. Techn., 72 (2009), 899–901.10.1002/jemt.20780 ↗
20. Y. Yogo, H. Takeuchi,T. Ishikawa, N. Iwata and K. Nakanishia: Scripta Mater., 61 (2009), 1001–3.10.1016/j.scriptamat.2009.08.003 ↗
21. H. Chikama, H. Shibata, T. Emi and M. Suzuki: Mater. Trans. 37 (1996), 620–26.10.2320/matertrans1989.37.620 ↗
22. H. Yin, T. Emi, H. Shibata: ISIJ Int., 38 (1998), 794–801.10.2355/isijinternational.38.794 ↗
23. H. Yin, T. Emi and H. Shibata: Acta Mater., 47 (1999), 1523–37.10.1016/S1359-6454(99)00022-1 ↗
24. R.J. Dippenaar and D.J. Phelan: Metall. Mater. Trans. B, 34B (2003), 495–501.10.1007/s11663-003-0016-y ↗
25. H. Terasaki and Y. Komizo: Sci. Technol. Weld Joining, 11 (2006), 561–66.10.1179/174329306X149795 ↗
26. D. Zhang, Y. Shintaku, S. Suzuki, and Y. Komizo: Metall. Mater. Trans. A, 43A (2012), 447–58.10.1007/s11661-011-0892-8 ↗
27. P Kolmskog, A. Borgenstam, M. Hillert, P. Hedstrom, S.S. BABU, H. Terasaki, and Y. Komizo: Metall. Mater. Trans. A, 43A (2012), 4984–88.10.1007/s11661-012-1342-y ↗
28. J. Pak, D.W. Suh, and H.K.D.H. Bhadeshia: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 4520–24.10.1007/s11661-012-1264-8 ↗
29. K. Narita: Trans. Iron. Steel. Inst. Jpn, 15 (1975) 145–52.10.2355/isijinternational1966.15.145 ↗
30. M. Hillert and L.-I. Staffansson: Acta Chem Scand. 24 (1970) 3618–26.10.3891/acta.chem.scand.24-3618 ↗
31. H. Ohtani, M. Hasebe and T. Nishizawa: CALPHAD 13 (1989) 183–204.10.1016/0364-5916(89)90019-9 ↗