journal article·2013-02

The Small Fatigue Crack Growth Behavior of an AM60 Magnesium Alloy

Zhe Chen, Amit Shyam, Jack Huang, Ray F. Decker, Steve E. LeBeau, Carl J. Boehlert

Publisher page

Abstract

The effects of thermomechanical processing and subsequent heat treatment on the small fatigue crack growth (FCG) behavior of an AM60 (Mg-6.29Al-0.28Mn wt pct) alloy were evaluated. The effects of mechanical loading parameters, such as maximum stress and load-ratio, on the small FCG behavior were also determined. Maximum stress did not appear to affect the crack propagation rate of small cracks in the stress and crack size ranges considered. Materials with different microstructures and yield stresses, introduced by different processing conditions, showed similar crack growth rates at equivalent stress intensity factor ranges. The effect of load ratio on small crack growth rates was recorded. Fracture surface characterization suggested that the fatigue crack propagation mechanism was a mixture of transgranular and intergranular cracking. Porosity and other material defects played respective important roles in determining the fatigue crack initiation and propagation behavior.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. B.L. Mordike and T. Ebert: Mater. Sci. Eng. A, 2001, vol. 302, pp. 37–45.10.1016/S0921-5093(00)01351-4 ↗
2. A.A. Luo: Int. Mater. Rev., 2004, vol. 49, pp. 13–30.10.1179/095066004225010497 ↗
3. Z. Chen, J. Huang, R.F. Decker, S.E. Lebeau, L.R. Walker, O.B. Cavin, T.R. Watkins, and C.J. Boehlert: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 1386–99.10.1007/s11661-010-0478-x ↗
4. P. Paris and F. Erdogan: J. Basic Eng., 1963, vol. 85, pp. 528–34.10.1115/1.3656900 ↗
5. K. Walker: Effects of Environment and Complex Load History on Fatigue Life, ASTM STP 462, American Society for Testing and Materials, Philadelphia, PA, 1970, pp. 1–14.
6. S. Suresh and R.O. Ritchie: Int. Met. Rev., 1984, vol. 29, pp. 445–86.10.1179/imr.1984.29.1.445 ↗
7. S. Pearson: Eng. Fract. Mech., 1975, vol. 7, pp. 235–47.10.1016/0013-7944(75)90004-1 ↗
8. K. Tanaka, Y. Akiniwa, Y. Nakai, and R.P. Wei: Eng. Fract. Mech., 1986, vol. 24, pp. 803–19.10.1016/0013-7944(86)90266-3 ↗
9. L. Edwards and Y.H. Zhang: Acta Metall. Mater., 1994, vol. 42, pp. 1423–31.10.1016/0956-7151(94)90161-9 ↗
10. A. Shyam, Y.N. Picard, J.W. Jones, J.E. Allison, and S.M. Yalisove: Scripta Mater., 2004, vol. 50, pp. 1109–14.10.1016/j.scriptamat.2004.01.031 ↗
11. A. Shyam, J.E. Allison, and J.W. Jones: Acta Mater., 2005, vol. 53, pp. 1499–1509.10.1016/j.actamat.2004.12.004 ↗
12. A. Shyam, J.E. Allison, C.J. Szczepaiiski, T.M. Pollock, and J.W. Jones: Acta Mater., 2007, vol. 55, pp. 6606–16.10.1016/j.actamat.2007.08.022 ↗
13. M. Papakyriacou, H. Mayer, U. Fuchs, S.E. Stanzl-Tschegg, and R.P. Wei: Fatigue Fract. Eng. Mater. Struct., 2002, vol. 25, pp. 795–804.10.1046/j.1460-2695.2002.00571.x ↗
14. M.F. Horstemeyer, N. Yang, K. Gall, D. McDowell, J. Fan, and P. Gullett: Fatigue Fract. Eng. Mater. Struct., 2002, vol. 25, pp. 1045–56.10.1046/j.1460-2695.2002.00594.x ↗
15. K. Gall, G. Biallas, H.J. Maier, P. Gullett, M.F. Horstemeyer, D.L. McDowell, and J.H. Fan: Int. J. Fatigue, 2004, vol. 26, pp. 59–70.10.1016/S0142-1123(03)00079-3 ↗
16. K. Tokaji, M. Kamakura, Y. Ishiizumi, and N. Hasegawa: Int. J. Fatigue, 2004, vol. 26, pp. 1217–24.10.1016/j.ijfatigue.2004.03.015 ↗
17. K. Gall, G. Biallas, H.J. Maier, M.E. Horstemeyer, and D.L. McDowell: Mater. Sci. Eng. A, 2005, vol. 396, pp. 143–54.10.1016/j.msea.2005.01.014 ↗
18. R.F. Decker and S.E. LeBeau: Adv. Mater. Process, 2008, vol. 166, pp. 28–29.
19. J.C. Newman and I.S. Raju: Eng. Fract. Mech., 1981, vol. 15, pp. 185–92.10.1016/0013-7944(81)90116-8 ↗
20. Standard Test Method for Measurement of Fatigue Crack Growth Rates, ASTM E 647-08, ASTM International, West Conshohocken, PA.
21. T.D. Berman, W. Donlon, R. Decker, J. Huang, T.M. Pollock, and J.W. Jones: Magnesium Technology 2011, TMS, Warrendale, PA, 2011, pp. 599–603.10.1002/9781118062029.ch110 ↗
22. Standard Test Methods for Determining Average Grain Size, ASTM E112-96E3, ASTM International, West Conshohocken, PA.
23. R.W. Hertzberg: Deformation and Fracture Mechanics of Engineering Materials, 3rd ed., John Wiley & Sons, New York, 1989, pp. 477–79.
24. L.H. Rettberg, J.B. Jordon, M.F. Horstemeyer, and J.W. Jones: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 2260–74.10.1007/s11661-012-1114-8 ↗
25. D. Taylor and J.F. Knott: Fatigue Eng. Mater., 1981, vol. 4, pp. 147–55.10.1111/j.1460-2695.1981.tb01116.x ↗
26. J. Lankford: Fatigue Fract. Eng. Mater. Struct., 1985, vol. 8, pp. 161–75.10.1111/j.1460-2695.1985.tb01201.x ↗
27. H. Kitagawa and S. Takahashi: Second International Conference on Mechanical Behavior of Materials, ASM, Metals Park, OH, 1976, pp. 627–31.
28. A. Shyam and E. Lara-Curzio: Int. J. Fatigue, 2010, vol. 32, pp. 1843–52.10.1016/j.ijfatigue.2010.05.005 ↗
29. L. Edwards and Y.H. Zhang: Acta Metall. Mater., 1994, vol. 42, pp. 1413–21.10.1016/0956-7151(94)90160-0 ↗