Dopant particle characterization and bubble evolution in aluminum-potassium-silicon-doped molybdenum wire
Source abstract
Abstract
The present article describes the creation of dopant inclusions in aluminum-potassium-silicon (AKS)-doped molybdenum powder and the generation of potassium bubbles in doped molybdenum wire. Molybdenum wire is used extensively in the incandescent lamp industry for coiling mandrels, filament support wires, and foil seals. The AKS-doped molybdenum wire is an important product, because it possesses greater high-temperature strength and a higher recrystallization temperature than undoped molybdenum; both of these properties are important for structural applications in lamps. The AKS-doped molybdenum wire is produced in a similar manner to AKS-doped tungsten wire, but lower processing temperatures are typically used for the production of molybdenum wire. Previous studies on AKS-doped tungsten wire have shown that the dispersion which provides the interlocking grain structure in recrystallized tungsten wire is bubbles of elemental potassium; these enhance incandescent lamp filament life. However, there is little previous work on the potassium-containing dispersion in AKS-doped molybdenum wire. In AKS-doped molybdenum, the dispersion can be either potassium bubbles, or solid oxide particles, depending on the processing method. This article will describe a series of analyses of doped molybdenum wire and its precursors, namely, doped powder and sintered ingots. The roles of high- and low-temperature sintering are also described.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Electrical Contact Performance and Analysis · Mechanical stress and fatigue analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. R. Eck: Metall, 1979, vol. 33 (8), pp. 819–23.
2. R. Eck: Planseeber Pulvermet, 1974, vol. 22, pp. 165–74.
3. T. Takebe, T. Akiyama, K. Shimatani, and M. Endoh: in Physical Metallurgy and Technology of Molybdenum and Its Alloys, K.H. Miska, M. Semchyshen, and E.P. Whelan, eds., AMAX Materials Research Center, Ann Arbor, MI, 1985, pp. 41–45.
4. D.J. Jones: Metall. Mater. Technol., 1973, vol. 5 (10), pp. 503–12.
5. D.J. Jones and A. Leach: Powder Metall., 1979, vol. 3, pp. 125–32.10.1179/pom.1979.22.3.125 ↗
6. The Metallurgy of Doped/Non-Sag Tungsten, E. Pink and L. Bartha, eds., Elsevier, New York, NY, 1989.
7. D.B. Snow: Metall. Trans., 1974, vol. 5, pp. 2375–81.10.1007/BF02644019 ↗
8. D.B. Snow: Metall. Trans., 1972, vol. 3, pp. 2553–54.10.1007/BF02647071 ↗
9. D.M. Moon and R.C. Koo: Metall. Trans., 1971, vol. 2, pp. 2115–22.10.1007/BF02917539 ↗
10. O. Horacsek: in The Metallurgy of Doped/Non-Sag Tungsten, E. Pink and L. Bartha, eds., Elsevier, New York, NY, 1989, pp. 175–88.
11. C.L. Briant and J.L. Walter: Acta Metall., 1988, vol. 36, pp. 2503–14.10.1016/0001-6160(88)90196-4 ↗
12. U.S. Patent Nos. 5,734,960 and 4,755,712.
13. B.P. Bewlay, N. Lewis, and K.A. Lou: Metall. Trans. A, 1991, vol. 22A, pp. 2153–56.10.1007/BF02669883 ↗
14. B.P. Bewlay and K.A. Lou: Tungsten and Tungsten Alloys—Recent Advances, TMS Symp., New Orleans, LA, Feb. 1991, TMS, Warrendale, PA, 1991, pp. 87–93.
15. D.M. Moon, R. Stickler, and A.L. Wolfe: Proc. 6th Int. Plansee Sem., Metallwerk Plansee GMBH, Reutte, Austria, 1968, pp. 67–85.
16. S.V. Naidu, R. Nagender, and P. Rama: Phase Diagrams of Binary Tungsten Alloys, Indian Institute of Metals, Calcutta, 1991.
17. T.B. Massalski: Binary Alloy Phase Diagrams, 2nd ed., ASM INTERNATIONAL, Materials Park, OH, 1990.
18. J.L. Walter, P. Rao, and R.R. Russell: Metall. Trans. A, 1975, vol. 6A, pp. 1775–84.10.1007/BF02642307 ↗
19. T.E. Dunham: Metall. Trans., 1971, vol. 2, pp. 2797–2804.10.1007/BF02813254 ↗
20. J.F. Schairer and N.L. Bowen: Bull. Soc. Geol. Finl., 1947, vol. 20, pp. 67–87.
21. J. Choi, H.T. Kim, and M.K. Yoo: Metall. Trans. A, 1991, vol. 22A, pp. 2155–56.10.1007/BF02669884 ↗
22. L. Brewer, R.H. Lamoreaux, R. Ferro, R. Marazza, and K. Girgis: Molybenum: Physico-Chemical Properties of Its Compounds and Alloys, International Atomic Energy Agency, Vienna, 1980.