The influence of thermomechanical treatment on the complex modulus of Mg alloy AZ31
Source abstract
Abstract
Dynamic modulus analyses were performed on Mg alloy AZ31 following thermomechanical treatments to enable investigation of the influence of microstructural features created by plastic deformation on the elastic and the anelastic behavior of this alloy as quantified by variations in the complex elastic modulus (E* = E′ + iE″) with temperature. The real component or storage modulus (E′) determined for this alloy was 42.0 ± 2.5 GPa at 25 °C and it was independent of rolling direction and cold work up to 20 pct reduction in thickness. A broad peak was observed in the imaginary component or loss modulus (E″) around 175 °C (for a 1.0 Hz loading frequency), and it was determined that this peak is a superposition of at least four different relaxation mechanisms: a thermally activated mechanism related to precipitate phases near 153 °C and three peaks related to mechanical deformation at 165 °C, 188 °C, and 235 °C. The latter three peaks were also thermally activated with the activation energy determined to be 1.68 ± 0.04 eV. These mechanical relaxation peaks are attributed to microstructural features produced by cold work, and it is demonstrated that the stresses generated by cooling from heat-treatment temperatures influences these peaks. It is concluded that the grain boundary relaxation peak is above 350 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. I.J. Polmear: Light Aloys—Metallurgy of the Light Metals, ASM, Metals Park, OH, 1981, pp. 127–37.
2. C.S. Roberts: Magnesium and Its Alloys, John Wiley & Sons, Inc., New York, NY, 1960.
3. Magnesium 2000–2nd Int. Conf. on Magnesium Science and Technology, The Dead Sea, 2000, E. Aghion and D. Eliezer, eds., Magnesium Research Institute, Beer-Sheva, Israel, 2000.
4. Magnesium 1997–1st Int. Conf. on Magnesium Science and Technology, The Dead Sea, 2000, E. Aghion and D. Eliezer, eds., Magnesium Research Institute, Beer-Sheva, Israel, 1997.
5. D. Wilson: “Stamping Out Manufacturing Costs,” in Metalworking Production, 2003.
6. G.E. Dieter: Mechanical Metallurgy, McGraw-Hill, New York, NY, 1976, pp. 135–38.
7. W. Rostoker and J.R. Dvorak: Interpretation of Metallographic Structures, 2nd ed., Academic Press, Inc., New York, NY, 1977, pp. 127–37.10.1016/B978-0-12-598260-3.50009-1 ↗
8. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, Elsevier Science Ltd., Oxford, United Kingdom, 1995.
9. Y.S. Touloukian, R.K. Kirby, R.E. Taylor, and P.D. Desai: Thermal Expansion, Metallic Elements and Alloys, New York, NY, IFI/Plenum, 1975, pp. 194–200.10.1007/978-1-4757-1622-1 ↗
10. O.A. Lambri, W. Riehemann, and Z. Trojanova: Scipta Mater., 2001, vol. 45, pp. 1365–71.10.1016/S1359-6462(01)01171-X ↗
11. A.S. Nowick and B.S. Berry: Anelastic Relaxation in Crystalline Solids, Academic Press, New York, NY, 1972.
12. A. Munitz, D. Dayan, D. Pitcher, and R.E. Ricker: in Magnesium Technology 2004, A.A. Luo, ed., TMS, Warrendale, PA, 2004, pp. 103–06.
13. F.N. Rhineset al.: in Metal Handbook, T. Lyman, ed., ASM, Metals Park, OH, 1972, vol. 1, pp. 1067–1112.
14. P.G. Shewmon: J. Met. (Trans. AIME), 1956, vol. 8, pp. 918–22.
15. A.M. Brown and M.F. Ashby: Acta Metall., 1980, vol. 28, pp. 1085–1101.10.1016/0001-6160(80)90092-9 ↗
16. I. Kaur, Y. Mishin, and W. Gust: Fundamentals of Grain Boundary and Interphase Diffusion, John Wiley & Sons, New York, NY, 1995.
17. C. Zener: Elasticity and Anelasticity of Metals, University of Chicago, Chicago, IL, 1948.
18. F.T. Worrell: J. Appl. Phys., 1948, vol. 22, pp. 1257–59.
19. F.T. Worrell: J. Appl. Phys., 1948, vol. 19, pp. 929–33.10.1063/1.1697898 ↗
20. W. Hartt and R. Reed-Hill: Trans. TMS-AIME, 1968, vol. 242, pp. 2207–10.
21. L.T. Miyada-Naborikawa, R. De Batist, and P. Delavignette: Physica Status Solidi (a), 1985, vol. 90, pp. 277–83.10.1002/pssa.2210900127 ↗
22. R.J. Harrison, S.A.T. Redfern, and J. Street: Am. Mineralogist, 2003, vol. 88, pp. 574–82.10.2138/am-2003-0411 ↗
23. R.T.C. Tsui and H.S. Sack: Acta Metall., 1967, vol. 15, pp. 1715–22.10.1016/0001-6160(67)90062-4 ↗
24. R.T.C. Tsui: Acta Metall., 1967, vol. 15, pp. 1723–30.10.1016/0001-6160(67)90063-6 ↗
25. F.E. Hauser, P.H. Landon, and J.E. Dorn: Trans. ASM, 1958, vol. SO, p. 856.
26. P.G. Partridge: Metall. Rev., 1967, vol. 12, pp. 169–94.10.1179/imr.1967.12.1.169 ↗
27. E. Schmid: Z. Elektrochem., 1931, vol. 37, p. 447.
28. F.E. Hauser, P.R. Landon, and J.E. Dorn: Trans. ASM, 1955, vol. 48, p. 986.
29. F.E. Hauser, C.D. Starr, L.S. Tiets, and J.E. Dorn: Trans. ASM, 1955, vol. 47, p. 102.
30. R.F. Reed-Hill and W.D. Robertson: Acta Metall., 1957, vol. 5, p. 717.10.1016/0001-6160(57)90074-3 ↗
31. A.R. Chaudhuri, H.C. Chang, and N.J. Grant: Trans. AIME, 1955, vol. 203, p. 682.
32. A.R. Chaudhuri, N.J. Grant, and J.T. Norton: Trans. AIME, 1953, vol. 197, p. 256.
33. C.S. Roberts: “Non-Basal Slip and Twinning in Polycrystalline Magnesium at Room Temperature,” Report No. 55-241, Wright Air Development Center, Dayton, OH, 1955.
34. S.L. Couling and C.S. Roberts: Acta Cryst, 1956, vol. 9, p. 972.10.1107/S0365110X56002758 ↗
35. R.F. Reed-Hill and W.D. Robertson: Acta Metall., 1957, vol. 5, p. 728.10.1016/0001-6160(57)90075-5 ↗
36. S.L. Couling, J.F. Pashak, and L. Sturkey: Trans. ASM, 1959, vol. 51, p. 94.
37. A.G. Crocker: Phil. Mag., 1962, vol. 7, pp. 1901–24.10.1080/14786436208213854 ↗
38. M.A. Meyer, O. Vohringer, and V.A. Lubarda: Acta Mater., 2001, vol. 49, pp. 4025–39.10.1016/S1359-6454(01)00300-7 ↗
39. A. Munitz: NIST, Gaithersburg, MD, unpublished research, 2004.
40. M.R. Stoudt, A. Munitz, S.W. Banovic, and R.J. Fields: in Magnesium Technology 2004, A.A. Luo, ed., TMS, Warrendale, PA, 2004, pp. 269–74.
41. M.A. Gharghouri, G.C. Weatherly, J.D. Embury, and J. Root: Phil. Mag., 1999, vol. 79, p. 1671.10.1080/014186199251968 ↗
42. R.E. Reed-Hill, E.P. Dahlberg, and W.A. Slippy: Trans. AIME, 1965, vol. 233, p. 1766.
43. C.H. Caceres, T. Sumitomo, and M. Veidt: Acta Mater., 2003, vol. 51, pp. 6211–18.10.1016/S1359-6454(03)00444-0 ↗