journal article·2014-04

Phase Transformation and Morphology of Calcium Phosphate Prepared by Electrochemical Deposition Process Through Alkali Treatment and Calcination

Hui-Ting Chen, Moo-Chin Wang, Kuo-Ming Chang, Szu-Hao Wang, Wei-Jen Shih, Wong-Long Li

Publisher page

Abstract

The phase transformation and morphology of calcium phosphate prepared by the electrochemical deposition (ECD) process through alkali treatment and calcination have been characterized using X-ray diffraction (XRD), thermogravimetry and differential thermal analyses (TG/DTA), and scanning electron microscopy (SEM). At the ECD process, when the excess OH− was produced, the reaction of 10Ca2++6PO43−+2OH–→Ca10(PO4)6(OH)2 takes place on the Ti-6Al-4V and the HA is deposited. The XRD results reveal that the as-deposit was mostly composed of dicalcium phosphate dehydrate (Ca2H4P2O9; DCPD) and the minor phase of hydroxyapatite (Ca10(PO4)6(OH)2; HA). After NaOH treatment, all DCPD were converted to HA. Moreover, the content of HA phase increases with ECD potential. After being calcined at 673 K and 873 K (400 °C and 600 °C) for 4 hours, the phase of HA maintained the major phase for an alkali-treated deposited sample. After being calcined at 1073 K (800 °C) for 4 hours, some HA decomposed and caused the minor phases of β-tricalcium phosphate (β-Ca3(PO4)2; β-TCP), calcium pyrophosphate (Ca2P2O7; CPP), and calcium oxide (CaO) formation. The β-TCP becomes the major phase with residual HA and CaO after being calcined at 1273 K (1000 °C) for 4 hours. The crack forms due to the release of absorbed water from the interior to top surface of sample. For the as-alkali treatment samples, the microstructures were affected by ECD potentials; when the deposited samples after alkali treatment and calcined at 1073 K (800 °C) for 4 hours, the microstructure presents the need-like “preforming HA” (pre-HA) from the matrix of plate-like postforming HA (post-HA).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Titanium Alloys Microstructure and Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. M. Jarcho, C.H. Bolen, M.B. Thomas, J. Bobick, F. Kay, and R.H. Dorcmus: J. Mater. Sci., 1976, vol. 11, pp. 2027-35.10.1007/BF02403350 ↗
2. H. Aoki, K. Kato, M. Ogiso, and T. Tabata: J. Dent. Outlook, 1977, vol. 49, pp. 567-75.
3. J. Currey: Nature, 2001, vol. 414, pp. 699-708.10.1038/414699a ↗
4. Y.C. Chai, S. Truscello, S.V. Bael, F.P. Luyten, J. Vleugels, and J. Schrooten: Acta Biomater., 2011, vol. 7, pp. 2310-19.10.1016/j.actbio.2010.12.032 ↗
5. W. Suchanek and M. Yoshmmura: J. Mater. Res., 1998, vol. 13, pp. 94-117.10.1557/JMR.1998.0015 ↗
6. S. Ban and J. Hasegawa: Biomaterials, 2002, vol. 23, pp. 2965-72.10.1016/S0142-9612(02)00025-X ↗
7. S.H. Wang, W.J. Shih, W.L. Li, M.H. Hon, and M.C. Wang: J. Eur. Ceram. Soc., 2005, vol. 25, pp. 3287-92.10.1016/j.jeurceramsoc.2004.08.016 ↗
8. A. Rakngarm and Y. Mutoh: Mater. Sci. Eng. C, 2009, vol. 29, pp. 275-83.10.1016/j.msec.2008.06.028 ↗
9. R. Drevet, H. Benhayoune, L. Wortham, S. Potiron, J. Douglade, and D. Laurent-Maquin: Mater. Charact., 2010, vol. 61, pp. 786-95.10.1016/j.matchar.2010.04.016 ↗
10. A. Yanovska, V. Kuznetsov, A. Stanislavov, S. Danilchenko, and L. Sukhodub: Surf. Coat. Technol., 2011, vol. 205, pp. 5324-29.10.1016/j.surfcoat.2011.05.040 ↗
11. R. Drevet, F. Velard, S. Potiron, D. Laurent-Maquin, and H. Benhayoune: J. Mater. Sci. Mater. Med., 2011, vol. 22, pp. 753-61.10.1007/s10856-011-4251-5 ↗
12. X. Zhao, H. Li, M. Chen, K. Li, J. Lu, L. Zhang, and S. Cao: Surf. Interface Anal., 2012, vol. 44, pp. 21-28.10.1002/sia.3764 ↗
13. P. Ducheyne, S. Radin, M. Heughebaert, and J.C. Heughebaert: Biomaterials, 1990, vol. 11, pp. 244-54.10.1016/0142-9612(90)90005-B ↗
14. I. Zhitomirsky: Mater. Lett., 2000, vol. 42, pp. 262-71.10.1016/S0167-577X(99)00197-4 ↗
15. B. Koch, J.G.C. Wolke, and K. de Groot: J. Biomed. Mater. Res., 1990, vol. 24, pp. 665-67.10.1002/jbm.820240603 ↗
16. L.G. Ellies, D.G. Nelson, and J.D. Featherstone: Biomaterials, 1992, vol. 13, pp. 313-16.10.1016/0142-9612(92)90055-S ↗
17. A. Carradò: Key Eng. Mater., 2013, vol. 533, pp. 183-93.10.4028/www.scientific.net/KEM.533.183 ↗
18. M. Mansol, G. Jiménez, C. Morant, P. Herrero, and J.M. Martínez-Duart: Biomaterials, 2000, vol. 21, pp. 1755-61.10.1016/S0142-9612(00)00061-2 ↗
19. J.S. Chen, H.Y. Jaung, and M.H. Hon: J. Mater. Sci.: Mater. Med., 1998, vol. 9, pp. 297-300.
20. J.M. Zhang, C.J. Lin, Z.D. Feng, and Z.W. Tian: J. Electroanal. Chem., 1998, vol. 452, pp. 235-40.10.1016/S0022-0728(98)00107-7 ↗
21. G. Daculsi: Biomaterials, 1998, vol. 19, pp. 1473-78.10.1016/S0142-9612(98)00061-1 ↗
22. W.J. Shih, M.C. Wang, K.M. Chang, C.L. Wang, S.H. Wang, W.L. Li, and H.H. Huang: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 3509-16.10.1007/s11661-010-0417-x ↗
23. M. Schirkhanzaden: J. Mater. Sci. Mater. Med., 1998, vol. 9, pp. 67-72.10.1023/A:1008838813120 ↗
24. M. Manso, M. Langlet, C. Jiménez, and J.M. Martínez-Duart: Int. J. Inorg. Mater., 2001, vol. 3, pp. 1153-55.10.1016/S1466-6049(01)00112-X ↗
25. V.S. Joshi and M.J. Joshi: Crystal Res. Technol., 2003, vol. 39, pp. 817-21.10.1002/crat.200310100 ↗
26. H.S. Liu, T.S. Chin, L.S. Lai, S.Y. Chiu, K.H. Chung, and C.S. Chang: Ceram. Int., 1997, vol. 23, pp. 19-25.10.1016/0272-8842(95)00135-2 ↗
27. C.W. Kuo, Y.H. Shen, S.B. Wen, H.E. Lee, I.M. Hung, H.H. Huang, and M.C. Wang: Ceram. Int., 2011, vol. 37, pp. 341-47.10.1016/j.ceramint.2010.09.018 ↗
28. J.C. Elliot: Structure-Chemistry of Apatites and Other Calcium Orthophosphates, Elsevier, Amsterdam, The Netherlands, 1994, p. 157.
29. K.L. Elmore and T.D. Farr: Ind. Eng. Chem., 1940, vol. 32, pp. 580-86.10.1021/ie50364a030 ↗
30. W.J. Shih, Y.H. Chen, S.H. Wang, W.L. Li, M.H. Hon, and M.C. Wang: J. Cryst. Growth, 2005, vol. 285, pp. 633-41.10.1016/j.jcrysgro.2005.08.042 ↗
31. M. Kumar, H. Dasarathy, and C. Riley: J. Biomed. Mater. Res., 1999, vol. 45, pp. 302-10.10.1002/(SICI)1097-4636(19990615)45:4<302::AID-JBM4>3.0.CO;2-A ↗
32. S. Röβler, A. Sewing, M. Stölzel, R.Born, D. Scharnweber, M. Dard, and H. Worch: J. Biomed. Mater. Res., 2003, vol. 64A, pp. 655-63.10.1002/jbm.a.10330 ↗
33. A.R. Verma: Crystal Growth and Dislocations, Butterworth Sci. Pub., London, U.K., 1993, p. 48.
34. M.C. Wang, W.J. Shih, K.M. Chang, S.H. Wang, W.L. Li, and H.H. Huang: J. Non-Cryst. Solids, 2010, vol. 356 (31–32), pp. 1546–53.10.1016/j.jnoncrysol.2010.05.050 ↗
35. K. Ohta, M. Kikuchi, J. Tanaka, and H. Eda: Chem. Lett., 2002, vol. 31, pp. 894-95.10.1246/cl.2002.894 ↗
36. M.T. Fulmer and P.W. Brown: J. Mater. Sci.: Mater. Med., 1998, vol. 9, pp. 197-202.10.1023/A:1008832006277 ↗
37. M.J. Sienko and R.A. Plane: Chemistry: Principles and Properties, McGraw-Hill Inc., New York, NY, 1996, p. 512.
38. S. Jinawath, D. Pongkao, W. Suchanek, and M. Yoshimura: J. Inorg. Mater., 2001, vol. 3, pp. 997-1001.10.1016/S1466-6049(01)00199-4 ↗
39. M. Manso, C. Jiménez, C. Morant, P. Herrero, and J.M. Martínez-Duart: Biomaterials, 2000, vol. 21, pp. 1755-61.10.1016/S0142-9612(00)00061-2 ↗
40. M.H.P.D. Silva, J.H.C. Lima, G.A. Soares, C.N. Elias, M.C. de Andrade, S.M. Best, and I.R. Gibson: Surf. Coat. Technol., 2011, vol. 137, pp. 270-76.10.1016/S0257-8972(00)01125-7 ↗
41. L.M. Rodríguez-Lorenzo, M. Vallet-Regí, and J.M.F. Ferreira: Biomaterials, 2001, vol. 22, pp. 583-88.10.1016/S0142-9612(00)00218-0 ↗
42. K. Kamiya, T. Yoko, K. Tanaka, and T. Fujiyama: J. Mater. Sci., 1989, vol. 24, pp. 827-32.10.1007/BF01148764 ↗
43. H.K. Verma and S. Sureshbabu: Mater. Lett., 2001, vol. 49, pp. 83-85.10.1016/S0167-577X(00)00346-3 ↗