journal article·2012-05Open access

Phase Identification and Internal Stress Analysis of Steamside Oxides on Plant Exposed Superheater Tubes

Karen Pantleon, Melanie Montgomery

Abstract

During long-term, high-temperature exposure of superheater tubes in thermal power plants, various oxides are formed on the inner side (steamside) of the tubes, and oxide spallation is a serious problem for the power plant industry. Most often, oxidation in a steam atmosphere is investigated in laboratory experiments just mimicking the actual conditions in the power plant for simplified samples. On real plant-exposed superheater tubes, the steamside oxides are solely investigated microscopically. The feasibility of X-ray diffraction for the characterization of steamside oxidation on real plant-exposed superheater tubes was proven in the current work; the challenges for depth-resolved phase analysis and phase-specific residual stress analysis at the inner side of the tubes with concave surface curvature are discussed. Essential differences between the steamside oxides formed on two different steels typically applied for superheaters, ferritic-martensitic X20CrMoV12-1 and lean austenitic stainless steel TP347H, respectively, are revealed by X-ray diffraction.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · High Temperature Alloys and Creep · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. I.G. Wright, A.S. Sabau, and R.B. Dooley: Mater. Sci. Forum, 2008, vols. 595–598, pp. 387-95.10.4028/www.scientific.net/MSF.595-598.387 ↗
2. S.R.J. Saunders and L.N. McCartney: Mater. Sci. Forum, 2006, vols. 522–523, pp. 119-28.10.4028/www.scientific.net/MSF.522-523.119 ↗
3. O.H. Larsen, R.B. Frandsen, and R. Blum: VGB Power Tech., 2004, vol. 84, pp. 89-96.
4. A.N. Hansson and M. Montgomery: Mater. Sci. Forum, 2006, vols. 522–523, pp. 181-88.10.4028/www.scientific.net/MSF.522-523.181 ↗
5. A.N. Hansson, M. Montgomery, and M.A.J. Somers: Oxid. Met., 2009, vol. 71, pp. 201-18.10.1007/s11085-009-9138-1 ↗
6. J. Jianmin, M. Montgomery, O.H. Larsen, and S.A. Jensen: Mater. Corros., 2005, vol. 56, pp. 542-49.10.1002/maco.200403857 ↗
7. I.G. Wright and R.B. Dooley: Int. Mater. Rev., 2010, vol. 55, pp. 129-67.10.1179/095066010X12646898728165 ↗
8. A.N. Hansson and M. Montgomery: Proc. of 9 th Liege Conf.: Materials for Advanced Power Engineering, Eds. J. Lecomte-Beckers, Q. Contrepois, T. Beck, and B. Kuhn, Forschungszentrum Jülich GmbH, Jülich, Germany, 2010, pp. 1022–31.
9. M. Montgomery, A.N. Hansson, T. Vilhelmse, and S.A. Jensen: Mater. Corros., 2011, in press.
10. M.M. Rahman, J. Purbolaksono, and J. Ahmad: Eng. Fail. Anal., 2010, vol. 17, pp. 1490-94.10.1016/j.engfailanal.2010.05.005 ↗
11. D.L.C. Neves, J.R de Carvalho Seixas, E.B. Tinoco, A. da Cunha Rocha, and I. de Cerqueira Abud: Mater. Res., 2004, vol. 7, pp. 155–61.10.1590/S1516-14392004000100021 ↗
12. A.S. Sabau and I.G. Wright: Oxid. Met., 2010, vol. 73, pp. 467-92.10.1007/s11085-009-9188-4 ↗
13. A.S. Sabau and I.G. Wright: J. Appl. Phys., 2009, vol. 106, pp. 023503-1–023503-8.10.1063/1.3157199 ↗
14. M. Montgomery, S.A. Jensen, A. Hansson, O. Biede, and T. Vilhelmsen: Proc. of 9 th Liege Conf.: Materials for Advanced Power Engineering, Eds. J. Lecomte-Beckers, Q. Contrepois, T. Beck, and B. Kuhn, Forschungszentrum Jülich GmbH, Jülich, Germany, 2010, pp. 1096–1105.
15. J. Zurek, E. Wessel, L. Niewolak, F. Schmitz, T.-U. Kern, L. Singheiser, and W.J. Quadakkers: Corros. Sci., 2004, vol. 46, pp. 2301-17.10.1016/j.corsci.2004.01.010 ↗
16. W. Christl, A. Rahmel, and M. Schütze: Oxid. Met., 1989, vol. 31, pp. 35-69.10.1007/BF00665486 ↗
17. D.R. Clarke: Acta Mater., 2003, vol. 51, pp. 1393-1407.10.1016/S1359-6454(02)00532-3 ↗
18. F.N. Rhines and J.S. Wolf: Metall. Trans., 1970, vol. 1, pp. 1701-10.10.1007/BF02642020 ↗
19. C. Zhou, H. Ma, and L. Wang: Oxid. Met., 2009, vol. 71, pp. 335-41.10.1007/s11085-009-9143-4 ↗
20. H.E. Evans: Int. Mater. Rev., 1995, vol. 40, pp. 1-40.10.1179/095066095790151124 ↗
21. R. Krishnamurthy and D.J. Srolovitz: Acta Mater., 2004, vol. 52, pp. 3761-80.10.1016/j.actamat.2004.04.036 ↗
22. V. Hauk: Structural and Residual Stress Analysis by Non-Destructive Methods, Elsevier, Atlanta, GA, 1997.
23. M. Schütze: Protective Oxide Scales and their Breakdown, Series on Corrosion and Protection, Wiley, New York, NY, 1991.
24. Landolt-Börnstein: Numerical Data and Functional Relationships in Science and Technology, vol. 11, Springer-Verlag, Germany, 1979.
25. X. Luo, R. Tang, C. Long, Z. Miao, Q. Peng, and C. Li: Nucl. Eng. Tech., 2008, vol. 40, pp. 147-54.10.5516/NET.2008.40.2.147 ↗
26. H.J. Yearian, J.M. Kortright, and R.H. Langenheim: J. Chem. Phys., 1954, vol. 22, pp. 1196-98.10.1063/1.1740331 ↗
27. G.C. Allen, K.R. Hallam, and J.A. Jutson: Powder Diffr., 1995, vol. 10, pp. 214-20.10.1017/S0885715600014779 ↗
28. P. Perrot: Landolt-Börnstein, New Series IV/11D3, Springer, 2008, pp. 1–27.
29. A.N. Hansson, K. Pantleon, F.B. Grumsen, and M.A.J. Somers: Oxid. Met., 2010, vol. 73, pp. 289-309.10.1007/s11085-009-9182-x ↗
30. Z.-F. Hu and Z.-G. Yang: Mater. Sci. Eng. A, 2004, vol. 383, pp. 224-28.10.1016/j.msea.2004.05.080 ↗
31. D.A. Skobir, M. Godez, A. Nagode, and M. Jenko: Surf. Interface Anal., 2010, vol. 42, pp. 717-21.10.1002/sia.3289 ↗
32. M. Francois, B. Dionnet, J.M. Sprauel, and F. Nardou: J. Appl. Cryst., 1995, vol. 28, pp. 761-67.10.1107/S0021889895006868 ↗
33. T. Oguri, K. Murata, and Y. Sato: J. Strain Anal., 2003, vol. 38, pp. 459-68.10.1243/03093240360713513 ↗