journal article·2005-11

Acoustic damping characterization and microstructure evolution during high-temperature creep of an austenitic stainless steel

Toshihiro Ohtani

Publisher page

Abstract

We studied the microstructure evolution of an austenitic stainless steel, Type 316L, subjected to tensile creep at 973 K through the monitoring of shear-wave attenuation and velocity using electromagnetic acoustic resonance (EMAR). Contactless transduction based on the Lorentz force mechanism is the key to establishing a monitor for microstructural change in the bulk of metals with high sensitivity. In the short interval, 60 to 70 pct of the creep life, attenuation experiences a peak, independent of the applied stress. A drastic change in dislocation mobility and rearrangement interrupted this novel phenomenon, as is supported by observations using a scanning electron microscope (SEM) and a transmission electron microscope (TEM). The EMAR exhibited the potential for the assessment of damage advance and the prediction of the remaining creep life of metals.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Hydrogen embrittlement and corrosion behaviors in metals · Electromagnetic Effects on Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. R. Viswanathan: Damage Mechanism and Life Assessment of High Temperature Components, ASM INTERNATIONAL, Metals Park, OH, 1989, pp. 1–110.10.31399/asm.tb.dmlahtc.9781627083409 ↗
2. R.B. Dooley and R. Viswanathan: Life Extension and Assessment of Fossil Power Plants, Proc. Conf. in Washington, June 1986, ERPICS5208, Electric Power Research Institute, Palo Alto, CA, 1987.
3. P. Auerkari and J. Salonen: Int. J. Pressure Vessel Piping, 1989, vol. 39, pp. 135–44.10.1016/0308-0161(89)90043-4 ↗
4. R. Becker, G. Dobmann, M. Kronig, H. Reiter, and E. Schneider: Int. J. Pressure Vessel Piping, 1997, vol. 73, pp. 11–17.10.1016/S0308-0161(97)00028-8 ↗
5. G. Dobmann, M. Kroning, W. Theiner, H. Willems, and U. Fiedler: Nucl. Eng. Design, 1995, vol. 157, pp. 137–58.10.1016/0029-5493(95)00992-L ↗
6. B. Raj, V. Moorthy, T. Jayakumar, and R.K. Bhanu Sankara: Int. Mater. Rev., 2003, vol. 48, pp. 273–325.10.1179/095066003225010254 ↗
7. D.S. Drion, P.K. Liaw, and R.D. Rishel: ASME PVP-Vol.239/MPC-Vol.33, Serviceability of Petroleum Process and Power Equipment, ASME, OH, 1992, pp. 5–14.
8. M.K. Devine, D.C. Jiles, A.R. Eichmann, D.A. Kaminski, and S. Hardwick: J. Appl. Phys., 1993, vol. 73, pp. 5617–19.10.1063/1.353615 ↗
9. G. Dobmann, N. Meyendorf, and E.E. Schneider: Nucl. Eng. Design, 1997, vol. 171, pp. 95–112.10.1016/S0029-5493(96)01319-2 ↗
10. M.R. Govindaraju, D.A. Kaminski, M.K. Devine, S.B. Biner, and D. Jiles: Nondestr. Testing Eval. Int., 1997, vol. 30, pp. 11–17.
11. K.L. Murty, M.D. Wang, V.N. Shah, and F.M. Haggag: Int. J. Pressure Vessels, Piping, 1998, vol. 75, pp. 831–40.10.1016/S0308-0161(98)00093-3 ↗
12. M.N. Mikheev and E.S. Gorkunov: Sov. J. Nondestr. Testing, 1985, vol. 21, pp. 155–72.
13. M.N. Mikheev and E.S. Gorkunov: Sov. J. Nondestr. Testing, 1985, vol. 21, pp. 802–07.
14. E.S. Gorkunov, A.P. Nichipurk, V.M. Somova, and V.I. Levit: Sov. J. Nondestr. Testing, 1993, vol. 29, pp. 535–39.
15. A. Polar, J.E. Indacohea, M.L. Wang, V. Singh, and G. Lloyd: Trans. ASME, J. Eng. Mater. Technol., 2004, vol. 126, pp. 392–97.10.1115/1.1790542 ↗
16. H. Willems, T. Jayakumar, T. Koble, and W. Theiner: 2nd Annual Report on Project D4, Cost 501/II WP 5C, 1980–90, European Committee on Special Testing, IzfP, Saarbrucken, Germany, June, 1990.
17. B. Neubauer and U. Wedel: in Advances in Life Prediction Methods, D.A. Woodford and J.R. Whitehead, eds., ASME, New York, NY, 1983, pp. 307–14.
18. R.T. Delong: American Society for Testing and Materials, Philadelphia, PA, 1987, pp. E12–87.
19. C.E. Jaske, F.A. Simonen, and D.B. Roach: Hydrocarbon Processing, 1983, vol. 62, pp. 63–68.
20. R. Narayan and M. Mungole: Surf. Technol., 1985, vol. 24, pp. 233–39.10.1016/0376-4583(85)90073-1 ↗
21. D.S. Lashmore and J.F. Weinroth: Plat. Surf. Finishing, 1982, vol. 60, pp. 72–76.
22. S. Kim, J.R. Weerteman, S. Spooner, C.J. Glinka, V. Sikka, and W.B. Jones: in Nondestructive Evaluation: Application to Material Processing, O. Buck and S.M. Wolf, eds., Warrendale, PA., 1983, pp. 169–76.
23. H. Stamm: Eur. J. Nondestr. Testing, 1992, vol. 1, pp. 169–78.
24. H. Willems, W. Bendick, and H. Weber: in Nondestructive Characterization of Materials II, J.F. Brussiere, J. Ruud Monchalin, and R.E. Green, Jr., eds., Plenum Press, New York, NY, 1987, pp. 451–59.10.1007/978-1-4684-5338-6_46 ↗
25. H.M. Ledbetter, R.J. Fields, and S.K. Datta: Acta Metall., 1987, vol. 35, pp. 2393–98.10.1016/0001-6160(87)90086-1 ↗
26. M. Nakashiro, H. Yoneyama, and A. Ohtomo: Int. Conf. on Advances in Material Technology for Fossil Power Plants, ASM INTERNATIONAL, Metals Park, OH, 1987, pp. 351–58.
27. S. Kishimoto, N. Shinya, S. Matsumoto, and H. Fukuhara: Proc. 26th Symp. on the Strength of Materials at High Temperatures, The Society of Materials Science, Tokyo, 1988, pp. 11–15 (in Japanese).
28. A.S. Birring, D.G. Alcazer, J.J. Hanley, and S. Gehl: in Review of Progress in Quantitative Non-Destructive Evaluation, D.O. Thompson and D.E. Chimenti, eds., Plenum Press, New York, NY, 1989, vol. 8B, pp. 1833–40.10.1007/978-1-4613-0817-1_232 ↗
29. M. Hirao, T. Morishita, and H. Fukuoka: Metall. Trans. A, 1990, vol. 21A, pp. 1725–32.10.1007/BF02672589 ↗
30. U. Stigh: Eng. Fract. Mech., 1987, vol. 28, pp. 1–12.10.1016/0013-7944(87)90114-7 ↗
31. T. Morishita and M. Hirao: Int. J. Solids Struct., 1997, vol. 34, pp. 1169–75.10.1016/S0020-7683(96)00110-2 ↗
32. K. Goebbels: Research Technology in NDT, Academic Press, London, 1980, vol. 4, pp. 87–157.
33. M. Hirao, H. Ogi, and H. Fukuoka: Rev. Scientific Instrum., 1993, vol. 64, pp. 3198–3205.10.1063/1.1144328 ↗
34. M. Hirao and H. Ogi: Ultrasonics, 1997, vol. 35, pp. 413–21.10.1016/S0041-624X(97)00030-9 ↗
35. M. Hirao and H. Ogi: EMATs for Science and Industry, Kluwer Academic Publisher, Boston, MA, 2003, pp. 1–193.10.1007/978-1-4757-3743-1 ↗
36. T. Ohtani, H. Ogi, and M. Hirao: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 411–20.10.1007/s11661-005-0312-z ↗
37. T. Ohtani, H. Ogi, and M. Hirao: Int. J. Solids Struct., 2005, vol. 42, pp. 2911–28.10.1016/j.ijsolstr.2004.09.037 ↗
38. G.V. Smith: An Evaluation of the Yield, Tensile, Creep and Rupture Strengths of Wrought 304, 316, 321 and 347 Stainless Steels at Elevated Temperatures, ASTM Data Series DS 5S2, ASTM, Philadelphia, PA, 1969, pp. 1–82.10.1520/DS5S2-EB ↗
39. K. Maruyama, C. Harada, and H. Oikawa: J. Soc. Mater. Sci. Jpn., 1985, vol. 34, pp. 1289–95.10.2472/jsms.34.1289 ↗
40. K. Maruyama and H. Oikawa: Trans. ASME, J. Pressure Vessel Technol., 1987, vol. 109, pp. 142–48.10.1115/1.3264846 ↗
41. A. Granato and K. Lücke: J. Appl. Phys., 1956, vol. 27, pp. 583–93.10.1063/1.1722436 ↗
42. B.W. Maxfield and C.M. Fortuko: Mater. Eval., 1983, vol. 11, pp. 1399–1408.
43. A. Wilbrand: in Rev. Progr. QNDE, 1990, vol. 7A, pp. 671–80.
44. R.B. Thompson: in Physical Acoustics, Academic Press, Inc., New York, NY, 1990, vol. XIX, pp. 157–81.
45. C.M. Furtonko, G.L. Petersen, B.B. Chick, M.C. Renken, and A.L. Peris: Rev. Scientific Instrum., 1992, vol. 63, pp. 3477–86.10.1063/1.1143752 ↗
46. H. Ogi, M. Hirao, T. Honda, and H. Fukuoka: Rev. Progr. QNDE, 1995, vol. 14, pp. 1601–08.
47. H. Ogi, M. Hirao, and T. Honda: J. Acoust. Soc. Am., 1995, vol. 98, pp. 458–64.10.1121/1.413703 ↗
48. R.C. Truell, C. Elbaum, and B.B. Chick: Ultrasonic Methods in Solid State Physics, Academic Press, New York, NY, 1969, pp. 159–249.10.1016/B978-1-4832-3318-5.50008-0 ↗
49. H. Ogi, M. Hirao, T. Honda, and H. Fukuoka: J. Acoust. Soc. Am., 1995, vol. 98, pp. 1191–98.10.1121/1.413617 ↗
50. D. Hull and D.J. Bacon: Introduction to Dislocation, Pergamon Press, New York, NY, 1984, pp. 20–25.
51. M. Pahutova and J. Cadek: Mater. Sci. Eng., 1984, vol. 62, pp. 33–40.10.1016/0025-5416(84)90264-7 ↗
52. H. Ogi, M. Hirao, and T. Hamaguchi: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1121–28.10.1007/s11661-000-0107-1 ↗
53. M. Hirao, H. Ogi, N. Suzuki, and T. Ohtani: Acta Mater., 2000, vol. 48, pp. 517–24.10.1016/S1359-6454(99)00346-8 ↗
54. T. Ohtani, H. Ogi, and M. Hirao: J. Alloys Compounds, 2000, vol. 310, pp. 440–44.10.1016/S0925-8388(00)00956-7 ↗
55. H. Ogi, Y. Minami, and M. Hirao: J. Appl. Phys., 2002, vol. 91, pp. 1849–54.10.1063/1.1433178 ↗
56. A.S. Keh and S. Weissmann: Electron Microscopy and Strength of Crystal, Interscience, New York, NY, 1963, pp. 231–99.
57. C.R. Barrett, W.D. Nix, and O.D. Sherby: Trans. ASM, 1966, vol. 59, pp. 3–15.
58. T. Hasegawa, Y. Ikeuch, and S. Karashima: Met. Sci. J., 1972, vol. 6, pp. 78–82.10.1179/030634572790445858 ↗
59. A. Orlova and J. Cadek: Phil. Mag., 1973, vol. 28, pp. 891–99.10.1080/14786437308220990 ↗
60. V.L. Sikka, H. Nahm, and J. Moteff: Mater. Sci. Eng., 1975, vol. 20, pp. 55–62.10.1016/0025-5416(75)90130-5 ↗
61. S. Takeuchi and A.S. Argon: J. Mater. Sci., 1976, vol. 11, pp. 1542–66.10.1007/BF00540888 ↗
62. M. Okazaki, M. Hashimoto, and T. Sada: J. Soc. Mater. Sci., Jpn., 1992, vol. 41 (47), pp. 1729–35.10.2472/jsms.41.1729 ↗
63. M.E. Kassner and M.T. Perez-Prado: Fundamentals of Creep in Metals and Alloys, Elsevier, New York, NY, 2004, pp. 11–88.
64. J. Cadek: Creep in Metallic Materials, Elsevier, Amsterdam, 1988, pp. 95–114.
65. F.R.N. Nabarro and H.L. de Villier: The Physics of Creep: Creep and Creep-Resistant Alloys, Taylor & Francis, London, UK, 1995, pp. 15–46.